
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.


rad_recv: Access-Request packet from host 172.20.161.138:1812, id=1, length=135
        User-Name = "cflint"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
        Calling-Station-Id = "00-c0-49-f7-02-3c"
        EAP-Message = 0x0201000b0163666c696e74
        NAS-IP-Address = 192.168.1.5
        Message-Authenticator = 0xb04ea21e812245c3b3e98d98bed9050d
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
  rlm_eap: EAP packet type response id 1 length 11
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
  modcall[authorize]: module "files" returns notfound for request 0
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 0
modcall: group authorize returns updated for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 1 to 172.20.161.138:1812
        EAP-Message = 0x010200061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x97fa1026ce8cf220c1b4e057b4610771
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.20.161.138:1812, id=2, length=248
        User-Name = "cflint"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
        Calling-Station-Id = "00-c0-49-f7-02-3c"
        EAP-Message = [payload removed: 214 characters]
        State = 0x97fa1026ce8cf220c1b4e057b4610771
        NAS-IP-Address = 192.168.1.5
        Message-Authenticator = 0x473c85de95fb6fedea6e50a05fdbf45a
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "chap" returns noop for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
  rlm_eap: EAP packet type response id 2 length 106
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 1
  modcall[authorize]: module "files" returns notfound for request 1
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 1
modcall: group authorize returns updated for request 1
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11
    (other): before/accept initialization
    TLS_accept: before/accept initialization
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 005b], ClientHello
    TLS_accept: SSLv3 read client hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
    TLS_accept: SSLv3 write server hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0305], Certificate
    TLS_accept: SSLv3 write certificate A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
    TLS_accept: SSLv3 write server done A
    TLS_accept: SSLv3 flush data
    TLS_accept:error in SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
  eaptls_process returned 13
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 2 to 172.20.161.138:1812
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 228 characters]
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xba8622585d23b61cbbb69a55ed76f31d
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.20.161.138:1812, id=3, length=350
        User-Name = "cflint"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
        Calling-Station-Id = "00-c0-49-f7-02-3c"
        EAP-Message = [payload removed: 418 characters]
        State = 0xba8622585d23b61cbbb69a55ed76f31d
        NAS-IP-Address = 192.168.1.5
        Message-Authenticator = 0xa0311879d93249227ae16cfbd7bfabd8
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
  modcall[authorize]: module "chap" returns noop for request 2
  modcall[authorize]: module "mschap" returns noop for request 2
  rlm_eap: EAP packet type response id 3 length 208
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 2
  modcall[authorize]: module "files" returns notfound for request 2
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 2
modcall: group authorize returns updated for request 2
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
    TLS_accept: SSLv3 read client key exchange A
  rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
    TLS_accept: SSLv3 read finished A
  rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
    TLS_accept: SSLv3 write change cipher spec A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
    TLS_accept: SSLv3 write finished A
    TLS_accept: SSLv3 flush data
    (other): SSL negotiation finished successfully
SSL Connection Established
  eaptls_process returned 13
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 2
modcall: group authenticate returns handled for request 2
Sending Access-Challenge of id 3 to 172.20.161.138:1812
        EAP-Message = 0x0104004119001403010001011603010030613735e89023596b2c9b5fdfd00069c6d6044b4872247426010883468ac355666f33cb35ff6bf4a10e31d0ff13c26110
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xb18a2426a58d3727536694fecdbaf633
Finished request 2
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.20.161.138:1812, id=4, length=148
        User-Name = "cflint"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
        Calling-Station-Id = "00-c0-49-f7-02-3c"
        EAP-Message = 0x020400061900
        State = 0xb18a2426a58d3727536694fecdbaf633
        NAS-IP-Address = 192.168.1.5
        Message-Authenticator = 0x3da47dc9ef22ff9ec1187c0fc7916c9c
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
  modcall[authorize]: module "chap" returns noop for request 3
  modcall[authorize]: module "mschap" returns noop for request 3
  rlm_eap: EAP packet type response id 4 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 3
  modcall[authorize]: module "files" returns notfound for request 3
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 3
modcall: group authorize returns updated for request 3
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake is finished
  eaptls_verify returned 3
  eaptls_process returned 3
  rlm_eap_peap: EAPTLS_SUCCESS
  modcall[authenticate]: module "eap" returns handled for request 3
modcall: group authenticate returns handled for request 3
Sending Access-Challenge of id 4 to 172.20.161.138:1812
        EAP-Message = 0x010500501900170301002065952b373fd1ec0f5da91dbe1aadb956fa7b21ca9379edc0e26b55d36f4b8020170301002067445a832cd70c5765093d306b37ef72a17326973762558323a39d94dc8960b8
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x4c9d0fae0ec359629a1d3e592556269f
Finished request 3
Going to the next request
--- Walking the entire request list ---
Waking up in 4 seconds...
rad_recv: Access-Request packet from host 172.20.161.138:1812, id=5, length=222
        User-Name = "cflint"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
        Calling-Station-Id = "00-c0-49-f7-02-3c"
        EAP-Message = 0x020500501900170301002018578f23231a70a4ed05783c73d3bf2f88b9900063b731b5f5dbaa3e5465cf49170301002089e71fa21c37b6eb93cbe5dc6d7e0e6da9a9fbbb52b4a25fd492a2b83845c49c
        State = 0x4c9d0fae0ec359629a1d3e592556269f
        NAS-IP-Address = 192.168.1.5
        Message-Authenticator = 0xe06f64972c4e1d286b1943469610462d
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
  modcall[authorize]: module "chap" returns noop for request 4
  modcall[authorize]: module "mschap" returns noop for request 4
  rlm_eap: EAP packet type response id 5 length 80
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 4
  modcall[authorize]: module "files" returns notfound for request 4
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 4
modcall: group authorize returns updated for request 4
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Identity - cflint
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Got tunneled identity of cflint
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to cflint
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
  modcall[authorize]: module "chap" returns noop for request 4
  modcall[authorize]: module "mschap" returns noop for request 4
  rlm_eap: EAP packet type response id 5 length 11
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 4
  modcall[authorize]: module "files" returns notfound for request 4
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 4
modcall: group authorize returns updated for request 4
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
  rlm_eap: EAP Identity
  rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 4
modcall: group authenticate returns handled for request 4
  PEAP: Got tunneled Access-Challenge
  modcall[authenticate]: module "eap" returns handled for request 4
modcall: group authenticate returns handled for request 4
Sending Access-Challenge of id 5 to 172.20.161.138:1812
        EAP-Message = [payload removed: 226 characters]
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x99b9781be6f89fae433025d2e6e067d1
Finished request 4
Going to the next request
--- Walking the entire request list ---
Waking up in 3 seconds...
rad_recv: Access-Request packet from host 172.20.161.138:1812, id=6, length=286
        User-Name = "cflint"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
        Calling-Station-Id = "00-c0-49-f7-02-3c"
        EAP-Message = [payload removed: 290 characters]
        State = 0x99b9781be6f89fae433025d2e6e067d1
        NAS-IP-Address = 192.168.1.5
        Message-Authenticator = 0xe4f5ea0f4947ed66bf08d4c9701982bd
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
  modcall[authorize]: module "chap" returns noop for request 5
  modcall[authorize]: module "mschap" returns noop for request 5
  rlm_eap: EAP packet type response id 6 length 144
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 5
  modcall[authorize]: module "files" returns notfound for request 5
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 5
modcall: group authorize returns updated for request 5
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: EAP type mschapv2
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Setting User-Name to cflint
  PEAP: Adding old state with 81 df
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
  modcall[authorize]: module "chap" returns noop for request 5
  modcall[authorize]: module "mschap" returns noop for request 5
  rlm_eap: EAP packet type response id 6 length 65
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 5
  modcall[authorize]: module "files" returns notfound for request 5
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 5
modcall: group authorize returns updated for request 5
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/mschapv2
  rlm_eap: processing type mschapv2
  Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 5
  rlm_mschap: Found LM-Password
  rlm_mschap: Found NT-Password
  rlm_mschap: Told to do MS-CHAPv2 for cflint with NT-Password
rlm_mschap: adding MS-CHAPv2 MPPE keys
  modcall[authenticate]: module "mschap" returns ok for request 5
modcall: group Auth-Type returns ok for request 5
MSCHAP Success
  modcall[authenticate]: module "eap" returns handled for request 5
modcall: group authenticate returns handled for request 5
  PEAP: Got tunneled Access-Challenge
  modcall[authenticate]: module "eap" returns handled for request 5
modcall: group authenticate returns handled for request 5
Sending Access-Challenge of id 6 to 172.20.161.138:1812
        EAP-Message = [payload removed: 258 characters]
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x710a80c49a51690d9667f4a630de00ec
Finished request 5
Going to the next request
--- Walking the entire request list ---
Waking up in 2 seconds...
rad_recv: Access-Request packet from host 172.20.161.138:1812, id=7, length=222
        User-Name = "cflint"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
        Calling-Station-Id = "00-c0-49-f7-02-3c"
        EAP-Message = 0x02070050190017030100202bea8ad892dbcc055ea04e951db78d2c35286770ffc4af53081b9ea95e53c6ae1703010020eaca5677bc7c464220e4af5527f8f1f4d0af74bd17da8cef5c80879eb42e531d
        State = 0x710a80c49a51690d9667f4a630de00ec
        NAS-IP-Address = 192.168.1.5
        Message-Authenticator = 0x9fa0991da4e82b40bc1ead38f576861c
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
  modcall[authorize]: module "chap" returns noop for request 6
  modcall[authorize]: module "mschap" returns noop for request 6
  rlm_eap: EAP packet type response id 7 length 80
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 6
  modcall[authorize]: module "files" returns notfound for request 6
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 6
modcall: group authorize returns updated for request 6
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: EAP type mschapv2
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Setting User-Name to cflint
  PEAP: Adding old state with 5f 77
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
  modcall[authorize]: module "chap" returns noop for request 6
  modcall[authorize]: module "mschap" returns noop for request 6
  rlm_eap: EAP packet type response id 7 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 6
  modcall[authorize]: module "files" returns notfound for request 6
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 6
modcall: group authorize returns updated for request 6
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/mschapv2
  rlm_eap: processing type mschapv2
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns ok for request 6
modcall: group authenticate returns ok for request 6
Login OK: [cflint/<no User-Password attribute>] (from client localhost port 0)
  PEAP: Tunneled authentication was successful.
  rlm_eap_peap: SUCCESS
  modcall[authenticate]: module "eap" returns handled for request 6
modcall: group authenticate returns handled for request 6
Sending Access-Challenge of id 7 to 172.20.161.138:1812
        EAP-Message = 0x01080050190017030100205b052c90899d09d8ce0ede26d6bfd8d22072c6cb4d75c15232d62dc45e71dfef170301002090bab6b310fbe35503f035e51dbfa37dab258ebc96be0cef6fd6d4d6bdc4deb3
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xaf8ac58bba892fdca4d3ae799ba145e0
Finished request 6
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.20.161.138:1812, id=8, length=222
        User-Name = "cflint"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
        Calling-Station-Id = "00-c0-49-f7-02-3c"
        EAP-Message = 0x02080050190017030100205c5826b9e9fc3087dc11ae23396910b5a4f08ed2845cea8ba4b07293e4901b151703010020b880ab68fa71541dda81c3187864f892a011e379fdd4b699ab477239b6b05f92
        State = 0xaf8ac58bba892fdca4d3ae799ba145e0
        NAS-IP-Address = 192.168.1.5
        Message-Authenticator = 0x3b50990d288f958f825e216773838d78
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
  modcall[authorize]: module "chap" returns noop for request 7
  modcall[authorize]: module "mschap" returns noop for request 7
  rlm_eap: EAP packet type response id 8 length 80
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 7
  modcall[authorize]: module "files" returns notfound for request 7
rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items
rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items
rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX         ]' to config_items
rlm_passwd: Adding "Auth-Type = MS-CHAP"
  modcall[authorize]: module "etc_smbpasswd" returns ok for request 7
modcall: group authorize returns updated for request 7
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Tunneled data is valid.
  rlm_eap_peap: Success
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns ok for request 7
modcall: group authenticate returns ok for request 7
Login OK: [cflint/<no User-Password attribute>] (from client cisco port 0 cli 00-c0-49-f7-02-3c)
Sending Access-Accept of id 8 to 172.20.161.138:1812
        MS-MPPE-Recv-Key = 0x7ec051a1fda18b2c290025f314b323a2903ace0523a5f355736e37a025cb545a
        MS-MPPE-Send-Key = 0x9f4846668a198bf86234b1f7f1e8cafc147ea512ff644fb377253f1099636474
        EAP-Message = 0x03080004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "cflint"
Finished request 7
Going to the next request
--- Walking the entire request list ---
Cleaning up request 0 ID 1 with timestamp 434ff363
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 2 with timestamp 434ff364
Cleaning up request 2 ID 3 with timestamp 434ff364
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 3 ID 4 with timestamp 434ff365
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 4 ID 5 with timestamp 434ff366
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 5 ID 6 with timestamp 434ff367
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 6 ID 7 with timestamp 434ff368
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 7 ID 8 with timestamp 434ff369
Nothing to do.  Sleeping until we see a request.
