FreeRadius-1.04 install seg faults after install (using EAP-TLS)

Ben Dowling bendowling at
Thu Aug 25 20:59:28 CEST 2005


I am having problems with freeradius 1.04 on debian. I previously installed
the deb package, but later found out it doesn't support EAP-TLS, so had to
build from source. I built it with the following command:
./configure --with-rlm_eap_tls --disable-shared && make && make install

I have setup eap.conf and installed the required certificates. When starting
radiusd it seems to get past loading the config and then seg faults. The
output is below. Can anyone let me know what is causing the crash and how to
get round it? 

Thanks in advance, Ben

bratislava:/usr/local/etc/raddb# radiusd -X
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
 main: prefix = "/usr"
 main: localstatedir = "/var"
 main: logdir = "/var/log/freeradius"
 main: libdir = "/usr/lib/freeradius"
 main: radacctdir = "/var/log/freeradius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/freeradius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/freeradius/"
 main: user = "freerad"
 main: group = "freerad"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = yes
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: authtype = "MS-CHAP"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "/etc/shadow"
 unix: group = "(null)"
 unix: radwtmp = "/var/log/freeradius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "TLS"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
Segmentation fault

More information about the Freeradius-Users mailing list