Framed-Route ignored

[Arthur Sigel]

I have been trying to get this to work for a few days now with no success.
I have set up poptop (PPTP) and it uses the /etc/ppp/options.pptp file which
has a plugin for radius.  plugin radius.so

 

Radius will authenticate with my users fine, but I can't seem to get the
Framed-Route option to do anything. 

I am trying to set a route for a mask and not just the single IP to device
ppp connection.

 

Does ppp just ignore the route and this option just doesn't work with ppp or
pptp?  Is there a workaround?

 

Thank you,

 

Arthur

 

 

I am also using a SQL connection so the information will be left in that
format.

 

radius=# select * from radgroupcheck;

 id | groupname | attribute | op |  value  

----+-----------+-----------+----+---------

  1 | static    | Auth-Type | := | MS-CHAP

 

radius=# select * from radgroupreply;


 id | groupname |     attribute      | op |        value        

----+-----------+--------------------+----+---------------------

  1 | static    | Framed-Protocol        | := | PPP

  2 | static    | Service-Type              | := | Framed-user

  3 | static    | Framed-Compression | := | Van-Jacobsen-TCP-IP

  

id | username |     attribute     | op |         value         

----+----------+-------------------+----+-----------------------

  1 | arthur   | Framed-IP-Address  | := | 10.0.0.4

  3 | arthur   | Framed-Routing       | := | None

  2 | arthur   | Framed-IP-Netmask  | := | 255.255.255.0

  4 | arthur   | Framed-Route          | := | 10.0.0.0/24 0.0.0.0 1

 

The options file contains:

plugin radius.so

lock

mtu 1490

mru 1490

multilink

#proxyarp

auth

ipcp-accept-remote

lcp-echo-failure 30

lcp-echo-interval 5

deflate 0

+mschap-v2 

mppe required

nopcomp

noaccomp

 

pptpd.conf

localip 191.168.4.1

 

-----------------------------

VERSIONS OF THINGS

 

pptpd-1.2.3

pppd version 2.4.3

FreeRadius 1.05

 

RADIUS output snippet

 

        Framed-IP-Address := 10.0.0.4

        Framed-IP-Netmask := 255.255.255.0

        Framed-Routing := None

        Framed-Route := "10.0.0.0/24 0.0.0.0 1"

        Framed-Protocol := PPP

        Service-Type := Framed-User

        Framed-Compression := Van-Jacobson-TCP-IP

        MS-CHAP2-Success = *****

        MS-MPPE-Recv-Key = *****

        MS-MPPE-Send-Key = *****

        MS-MPPE-Encryption-Policy = 0x00000002

        MS-MPPE-Encryption-Types = 0x00000004

rad_recv: Accounting-Request packet from host 127.0.0.1:32798, id=114,
length=112

        Acct-Session-Id = "439E72E33A2C00"

        User-Name = "arthur"

        Acct-Status-Type = Start

        Service-Type = Framed-User

        Framed-Protocol = PPP

        Calling-Station-Id = "**.**.**.**"

        Acct-Authentic = RADIUS

        NAS-Port-Type = Async

        Framed-IP-Address = 10.0.0.4

        NAS-IP-Address = 127.0.0.1

        NAS-Port = 0

        Acct-Delay-Time = 0

 

Routing table 

Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface

10.0.0.4          *               255.255.255.255  UH         0      0
0 ppp0

192.168.3.0     *               255.255.255.0     U           0      0
0 eth2

192.168.2.0     *               255.255.255.0     U           0      0
0 eth0

192.168.1.0     *               255.255.255.0     U           0      0
0 eth1

loopback        *               255.0.0.0            U           0      0
0 lo

default         192.168.2.1     0.0.0.0            UG        0      0
0 eth0

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20051213/253678eb/attachment.html>