radiusd core dumps on authentication (solaris 9)

[Johan Ramm-Ericson]

Hello freeradius-users!

I am currently experiencing an authentication problem and am wondering
if anyone has run into something similar (or has an answer as to what
I'm doing wrong 

I am running freeradius 1.0.5 on a Solaris 9 box. I have my users
accounts currently stored in a NIS/YP database hosted by a Linux (Suse
SLES9) server. My users - configuration file - currently looks like
this:

DEFAULT         Auth-Type = Pam
                      Fall-Through = No

I have tried using Auth-Type = {System | Pam | unix}. No matter which I
try radiusd core dumps as soon as it comes to the Authenticate module
(see debug log below). This does not happen if I set Auth-Type = Local,
then everything works as expected. _But_ that would give me two username
/ password databases to maintain - which is not something I look forward
to.... Anyone have any ideas as to what's going on?

TIA,
Johan

PS. No idea if this helps but I have an old freeraidius 1.0.2 lying
around. The results (using the same config files) are the same.

debug log
---------------
/etc/init/freeradiusd start
....
Module: Instantiated realm (MIP02)
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (NULL)
 detail: detailfile =

"/opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
 radutmp: filename = "/opt/freeradius/var/log/radius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
 detail: detailfile =
"/opt/freeradius/var/log/radius/radacct/detail-combined"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = yes
Module: Instantiated detail (accounting_replication_log)
 detail: detailfile =

"/opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (pre_proxy_log)
 detail: detailfile =

"/opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/post-proxy-detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (post_proxy_log)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
 detail: detailfile =

"/opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (reply_log)
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.11.249:3644, id=171,
length=121
       NAS-IP-Address = 192.168.11.249
       NAS-Identifier = "vrr_ggsn_2"
       Called-Station-Id = "xxxx.xxx.xx"
       Service-Type = Framed-User
       Framed-Protocol = GPRS-PDP-Context
       NAS-Port-Type = Virtual
       User-Name = "daniel"
       User-Password = "secret"
       Calling-Station-Id = "00001111"
 Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
 modcall[authorize]: module "preprocess" returns ok for request 0
radius_xlat: 

'/opt/freeradius/var/log/radius/radacct/192.168.11.249/auth-detail-20051229'
rlm_detail:

/opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
expands to

/opt/freeradius/var/log/radius/radacct/192.168.11.249/auth-detail-20051229
 modcall[authorize]: module "auth_log" returns ok for request 0
   users: Matched entry DEFAULT at line 152
 modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
 rad_check_password:  Found Auth-Type Pam
auth: type "PAM"
 Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
pam_pass: using pamauth string <radiusd> for pam.conf lookup
Segmentation Fault - core dumped
radiusd