Can do EAP/TLS, but not EAP/MD5

[Artur Hecker]

or simply put 'eap' as the last module in the authorize section. should 
be the same.


Jefri bin Dahari wrote:
> It works. Thank you very much Vladimir.
> 
> ----- Original Message ----- From: "Vladimir Vuksan" <vlists at veus.hr>
> To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
> Sent: Friday, July 08, 2005 14:39
> Subject: Re: Can do EAP/TLS, but not EAP/MD5
> 
> 
>> Jefri bin Dahari wrote:
>>
>>> I have Freeradius running where wireless users authenticate using 
>>> EAP/TLS. Now, I would like to use the same server to authenticate 
>>> wired users using EAP/MD5 on Cisco switch 3750 but it doesn't work. 
>>> The log shows it doesn't do EAP authentication as shown below. 
>>> Attached is my eap.conf.
>>
>>
>>
>> You appear to be setting Auth-Type to Local. Check your Users file and 
>> see where the Auth-Type := Local or similar is getting set. Comment it 
>> out.
>>
>> Vladimir