upgrading freeRADIUS

Rupak rupak at sns.com.np
Wed Jun 1 01:40:27 CEST 2005


  I also had the same problem.Later on I came to know that I had to again
./configure --prefix=----- to another fresh unpacked tarball.Not in the old
unpacked tar ball.just again try tar -xvf freeradius-1.0.2.tar and again
./configure then make then again make install. This time  try and give
another directory in --prefix section.when I had faced this problem I even
formatted my box.Thanx that it was an isolated machine.

Rupak


Hi Stéphane (and all the others of course),

Thats is what I was trying to do, configure and install the new version 
elsewhere but still on the same machine (I'm gonna set the default ports 
to something else so there will be no conflicts). Now I've downloaded 
version 1.0.2 and I get a compilation error.
I do :
#configure --prefix=/opt/freeradius1.0.2
#make
and in the end of the compilation output I get this...

In file included from x99_rlm.c:54:
x99.h:26:42: openssl/des.h: No such file or directory
gmake[6]: *** [x99_rlm.o] Error 1
gmake[6]: Leaving directory 
`/home/vicky/freeradius-1.0.2/src/modules/rlm_x99_token'
gmake[5]: *** [common] Error 1
gmake[5]: Leaving directory `/home/vicky/freeradius-1.0.2/src/modules'
gmake[4]: *** [all] Error 2
gmake[4]: Leaving directory `/home/vicky/freeradius-1.0.2/src/modules'
gmake[3]: *** [common] Error 1
gmake[3]: Leaving directory `/home/vicky/freeradius-1.0.2/src'
gmake[2]: *** [all] Error 2
gmake[2]: Leaving directory `/home/vicky/freeradius-1.0.2/src'
gmake[1]: *** [common] Error 1
gmake[1]: Leaving directory `/home/vicky/freeradius-1.0.2'
make: *** [all] Error 2
zsh: exit 2     make

What am I missing?

Cheers

Vicky

DELORT Stephane wrote:

>Hello Vicky,
>
>Haven't you try to copy your config files and do the upgrade on a test
system ?
>(create an exact replica on another machine and upgrade it)
>I think it would be useful to post an "howto to upgrade from xxx to yyy"
once you've done it.
>
>regards,
>Stéphane
>
>
>
>-----Message d'origine-----
>De : freeradius-users-bounces at lists.freeradius.org
>[mailto:freeradius-users-bounces at lists.freeradius.org]De la part de
>vicky
>Envoyé : mardi 31 mai 2005 11:31
>À : FreeRadius users mailing list
>Objet : upgrading freeRADIUS
>
>
>Hi list subscribers, hi list admins, (again)
>
>I'm running a freeRADIUS server version 0.8.1 (I know it is ancient) and
>I want to upgrade it to the latest version available. I have been trying
>to find some kind of procedure to upgrading but with no success. Does
>anyone know how to (in a fairly simple way) safely upgrade? The
>safetyness is very crucial, I cant risk overwriting my old configuration.
>
>The old server is built with
>#configure --prefix=/opt/freeradius
>#make
>#su
>#make install
>
>Thanks to you all in advance and please notice that I'm not that of an
>expert on RADIUS...
>
>Keep up the good work!
>
>  
>


-- 
Vicky El Fhaily
Integration Manager

TRUSTIVE (France)
WTC 2, Les Bouillides
120, Route des Macarons
Parc de Sophia Antipolis
06560 Valbonne, France
Phone: +33 493 65 25 63
Fax: +33 493 65 21 56
www.trustive.com / www.corp.trustive.com


- 
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html

__________ NOD32 1.1111 (20050527) Information __________

This message was checked by NOD32 antivirus system.
http://www.nod32.com






More information about the Freeradius-Users mailing list