In a real tizz with digest.
Iandc Davies
Iandc.Davies at Marconi.com
Fri Sep 2 11:54:24 CEST 2005
All, ( Apologies for the size of the is mail before beginning :-)
Have already got this working once. I inserted an extra printf statement in
the radclient.c file yesterday and remade
just to get extra information. Ever since then its decided not to play ball
even after a reboot and backing out the change.
Now in a real mess and have resorted to clearing out and starting from
fresh with a newly downloaded 1.0.4.tar.gz from the site.
The following procedures were followed (all as root user on a Linux
2.4.20-31.9smp box):
tar zxvf <of tarball>
in freeradius-1.0.4. directory run ./configure --localstatedir=/var
--sysconfdir=/etc
run make command.
run make install command.
tested installation by running radiusd.
output : "Fri Sep 2 09:57:32 2005 : Info: Starting - reading configuration
files ..."
stopped process with 'kill -9'
Copied dictionary file from an old server version (0.8.1) - file available
at bottom of mail
ran radiusd -X
Found anomolies in file (i.e. duplictate entries for some VALUE statements)
and deleted.
Read $FREERADIUSHOME/doc/rlm_digest
document specified the following:
1. In the /etc/raddb/users file insert entry as below :-
Auth-Type := Digest, User-Password = "test"
Reply-Message = "Hello, test with Digest"
- - uname started at column zero with a <tab> to Auth-Type - -
2. Initiate radclient with a file called digest (i.e. radclient -f digest
localhost auth testing123)
User-Name = "test",
Digest-Response = "631d6d73147add2f9e437f59bbc3aeb7",
Digest-Realm = "testrealm",
Digest-Nonce = "1234abcd",
Digest-Method = "INVITE",
Digest-URI = "sip:5555551212 at example.com",
Digest-Algorithm = "MD5",
Digest-User-Name = "test"
Changed user-name from test to root in both files and user-password to
root-password in users.
Also amended the '=' to ':=' as per Alan's previous mails.
Ran radiusd -X in an xterm with the following output below:
Can't find the 'unexpected comma !! and its driving me crazy.
Cheers in advance.
==========================================================
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded System
unix: cache = no
unix: passwd = "/etc/passwd"
unix: shadow = "(null)"
unix: group = "/etc/group"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
/etc/raddb/users[91]: Unexpected trailing comma in check item list for
entry root
Errors reading /etc/raddb/users
radiusd.conf[1035]: files: Module instantiation failed.
====================================================================
Current radiusd.conf file.
=====================================================================
prefix = /usr/local
exec_prefix = ${prefix}
sysconfdir = /etc
localstatedir = /var
sbindir = ${exec_prefix}/sbin
logdir = ${localstatedir}/log/radius
raddbdir = ${sysconfdir}/raddb
radacctdir = ${logdir}/radacct
confdir = ${raddbdir}
run_dir = ${localstatedir}/run/radiusd
log_file = ${logdir}/radius.log
libdir = ${exec_prefix}/lib
pidfile = ${run_dir}/radiusd.pid
#user = nobody
#group = nobody
max_request_time = 30
delete_blocked_requests = no
cleanup_delay = 5
max_requests = 1024
bind_address = *
port = 0
#listen {
# ipaddr = *
# port = 0
# type = auth
#}
hostname_lookups = no
allow_core_dumps = no
regular_expressions = yes
extended_expressions = yes
log_stripped_names = no
log_auth = no
log_auth_badpass = no
log_auth_goodpass = no
usercollide = no
lower_user = no
lower_pass = no
nospace_user = no
nospace_pass = no
checkrad = ${sbindir}/checkrad
security {
max_attributes = 200
reject_delay = 1
status_server = no
}
proxy_requests = yes
$INCLUDE ${confdir}/proxy.conf
$INCLUDE ${confdir}/clients.conf
snmp = no
$INCLUDE ${confdir}/snmp.conf
thread pool {
start_servers = 5
max_servers = 32
min_spare_servers = 3
max_spare_servers = 10
max_requests_per_server = 0
}
modules {
pap {
encryption_scheme = crypt
}
chap {
# authtype = CHAP
}
pam {
# pam_auth = radiusd
}
unix {
cache = no
cache_reload = 600
passwd = /etc/passwd
# shadow = /etc/shadow
group = /etc/group
radwtmp = ${logdir}/radwtmp
}
$INCLUDE ${confdir}/eap.conf
mschap {
# authtype = MS-CHAP
#use_mppe = no
#require_encryption = yes
#require_strong = yes
#with_ntdomain_hack = no
#ntlm_auth = "/path/to/ntlm_auth --request-nt-key
--username=%{Stripped-User-Name:-%{User-Name:-None}}
--challenge=%{mschap:Challenge:-00}
--nt-response=%{mschap:NT-Response:-00}"
}
ldap {
server = "ldap.your.domain"
# identity = "cn=admin,o=My Org,c=UA"
# password = mypass
basedn = "o=My Org,c=UA"
filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
# base_filter = "(objectclass=radiusprofile)"
start_tls = no
# tls_cacertfile = /path/to/cacert.pem
# tls_cacertdir = /path/to/ca/dir/
# tls_certfile = /path/to/radius.crt
# tls_keyfile = /path/to/radius.key
# tls_randfile = /path/to/rnd
# tls_require_cert = "demand"
# default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA"
# profile_attribute = "radiusProfileDn"
access_attr = "dialupAccess"
dictionary_mapping = ${raddbdir}/ldap.attrmap
ldap_connections_number = 5
# password_header = "{clear}"
# password_attribute = userPassword
# edir_account_policy_check=no
# groupname_attribute = cn
# groupmembership_filter
= "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
# groupmembership_attribute = radiusGroupName
timeout = 4
timelimit = 3
net_timeout = 1
# compare_check_items = yes
# do_xlat = yes
# access_attr_used_for_allow = yes
}
#
#passwd etc_smbpasswd {
# filename = /etc/smbpasswd
# format
= "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::"
# authtype = MS-CHAP
# hashsize = 100
# ignorenislike = no
# allowmultiplekeys = no
#}
#passwd etc_group {
# filename = /etc/group
# format = "=Group-Name:::*,User-Name"
# hashsize = 50
# ignorenislike = yes
# allowmultiplekeys = yes
# delimiter = ":"
#}
realm IPASS {
format = prefix
delimiter = "/"
ignore_default = no
ignore_null = no
}
realm suffix {
format = suffix
delimiter = "@"
ignore_default = no
ignore_null = no
}
realm realmpercent {
format = suffix
delimiter = "%"
ignore_default = no
ignore_null = no
}
realm ntdomain {
format = prefix
delimiter = "\\"
ignore_default = no
ignore_null = no
}
checkval {
item-name = Calling-Station-Id
check-name = Calling-Station-Id
data-type = string
#notfound-reject = no
}
#
#attr_rewrite sanecallerid {
# attribute = Called-Station-Id
# may be "packet", "reply", "proxy", "proxy_reply" or
"config"
# searchin = packet
# searchfor = "[+ ]"
# replacewith = ""
# ignore_case = no
# new_attribute = no
# max_matches = 10
# ## If set to yes then the replace string will be appended
to the original string
# append = no
#}
preprocess {
huntgroups = ${confdir}/huntgroups
hints = ${confdir}/hints
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
# H323-Attribute = "value"
with_cisco_vsa_hack = no
}
files {
usersfile = ${confdir}/users
acctusersfile = ${confdir}/acct_users
preproxy_usersfile = ${confdir}/preproxy_users
# If you want to use the old Cistron 'users' file
# with FreeRADIUS, you should change the next line
# to 'compat = cistron'. You can the copy your 'users'
# file from Cistron.
compat = no
}
detail {
detailfile
= ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
detailperm = 0600
}
# detail auth_log {
# detailfile
= ${radacctdir}/%{Client-IP-Address}/auth-detail-%Y%m%d
# detailperm = 0600
# }
# detail reply_log {
# detailfile
= ${radacctdir}/%{Client-IP-Address}/reply-detail-%Y%m%d
# detailperm = 0600
# }
# detail pre_proxy_log {
# detailfile
= ${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d
# detailperm = 0600
# }
# detail post_proxy_log {
# detailfile
= ${radacctdir}/%{Client-IP-Address}/post-proxy-detail-%Y%m%d
#
# This MUST be 0600, otherwise anyone can read
# the users passwords!
# detailperm = 0600
# }
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
}
$INCLUDE ${confdir}/sql.conf
radutmp {
filename = ${logdir}/radutmp
username = %{User-Name}
case_sensitive = yes
check_with_nas = yes
perm = 0600
callerid = "yes"
}
radutmp sradutmp {
filename = ${logdir}/sradutmp
perm = 0644
callerid = "no"
}
attr_filter {
attrsfile = ${confdir}/attrs
}
counter daily {
filename = ${raddbdir}/db.daily
key = User-Name
count-attribute = Acct-Session-Time
reset = daily
counter-name = Daily-Session-Time
check-name = Max-Daily-Session
allowed-servicetype = Framed-User
cache-size = 5000
}
always fail {
rcode = fail
}
always reject {
rcode = reject
}
always ok {
rcode = ok
simulcount = 0
mpp = no
}
expr {
}
digest {
}
exec {
wait = yes
input_pairs = request
}
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = request
output_pairs = reply
#packet_type = Access-Accept
}
ippool main_pool {
range-start = 192.168.1.1
range-stop = 192.168.3.254
netmask = 255.255.255.0
cache-size = 800
session-db = ${raddbdir}/db.ippool
ip-index = ${raddbdir}/db.ipindex
override = no
# entry may be active. Default: 0
maximum-timeout = 0
}
# $INCLUDE ${confdir}/x99.conf
}
instantiate {
exec
expr
# daily
}
authorize {
preprocess
# auth_log
# attr_filter
# chap
# mschap
# digest
# IPASS
suffix
# ntdomain
eap
files
# sql
# etc_smbpasswd
# ldap
# daily
# checkval
}
authenticate {
Auth-Type PAP {
# pap
}
Auth-Type CHAP {
# chap
}
Auth-Type MS-CHAP {
# mschap
}
# digest
# pam
unix
# Auth-Type LDAP {
# ldap
# }
eap
}
preacct {
preprocess
acct_unique
# IPASS
suffix
# ntdomain
files
}
accounting {
detail
# daily
unix
radutmp
# sradutmp
# main_pool
# sql
# pgsql-voip
}
session {
radutmp
# sql
}
post-auth {
# main_pool
# reply_log
# sql
# ldap
# Post-Auth-Type REJECT {
# insert-module-name-here
# }
}
pre-proxy {
# attr_rewrite
# files
# pre_proxy_log
}
post-proxy {
# post_proxy_log
# attr_rewrite
# attr_filter
eap
}
=======================================================================
Current dictionary file
=======================================================================
#
# Following are the proper new names. Use these.
#
ATTRIBUTE User-Name 1 string
ATTRIBUTE User-Password 2 string encrypt=1
ATTRIBUTE CHAP-Password 3 octets
ATTRIBUTE NAS-IP-Address 4 ipaddr
ATTRIBUTE NAS-Port 5 integer
ATTRIBUTE Service-Type 6 integer
ATTRIBUTE Framed-Protocol 7 integer
ATTRIBUTE Framed-IP-Address 8 ipaddr
ATTRIBUTE Framed-IP-Netmask 9 ipaddr
ATTRIBUTE Framed-Routing 10 integer
ATTRIBUTE Filter-Id 11 string
ATTRIBUTE Framed-MTU 12 integer
ATTRIBUTE Framed-Compression 13 integer
ATTRIBUTE Login-IP-Host 14 ipaddr
ATTRIBUTE Login-Service 15 integer
ATTRIBUTE Login-TCP-Port 16 integer
ATTRIBUTE Reply-Message 18 string
ATTRIBUTE Callback-Number 19 string
ATTRIBUTE Callback-Id 20 string
ATTRIBUTE Framed-Route 22 string
ATTRIBUTE Framed-IPX-Network 23 ipaddr
ATTRIBUTE State 24 octets
ATTRIBUTE Class 25 octets
ATTRIBUTE Vendor-Specific 26 octets
ATTRIBUTE Session-Timeout 27 integer
ATTRIBUTE Idle-Timeout 28 integer
ATTRIBUTE Termination-Action 29 integer
ATTRIBUTE Called-Station-Id 30 string
ATTRIBUTE Calling-Station-Id 31 string
ATTRIBUTE NAS-Identifier 32 string
ATTRIBUTE Proxy-State 33 octets
ATTRIBUTE Login-LAT-Service 34 string
ATTRIBUTE Login-LAT-Node 35 string
ATTRIBUTE Login-LAT-Group 36 octets
ATTRIBUTE Framed-AppleTalk-Link 37 integer
ATTRIBUTE Framed-AppleTalk-Network 38 integer
ATTRIBUTE Framed-AppleTalk-Zone 39 string
ATTRIBUTE Acct-Status-Type 40 integer
ATTRIBUTE Acct-Delay-Time 41 integer
ATTRIBUTE Acct-Input-Octets 42 integer
ATTRIBUTE Acct-Output-Octets 43 integer
ATTRIBUTE Acct-Session-Id 44 string
ATTRIBUTE Acct-Authentic 45 integer
ATTRIBUTE Acct-Session-Time 46 integer
ATTRIBUTE Acct-Input-Packets 47 integer
ATTRIBUTE Acct-Output-Packets 48 integer
ATTRIBUTE Acct-Terminate-Cause 49 integer
ATTRIBUTE Acct-Multi-Session-Id 50 string
ATTRIBUTE Acct-Link-Count 51 integer
ATTRIBUTE Acct-Input-Gigawords 52 integer
ATTRIBUTE Acct-Output-Gigawords 53 integer
ATTRIBUTE Event-Timestamp 55 date
ATTRIBUTE CHAP-Challenge 60 string
ATTRIBUTE NAS-Port-Type 61 integer
ATTRIBUTE Port-Limit 62 integer
ATTRIBUTE Login-LAT-Port 63 integer
ATTRIBUTE Acct-Tunnel-Connection 68 string
ATTRIBUTE ARAP-Password 70 string
ATTRIBUTE ARAP-Features 71 string
ATTRIBUTE ARAP-Zone-Access 72 integer
ATTRIBUTE ARAP-Security 73 integer
ATTRIBUTE ARAP-Security-Data 74 string
ATTRIBUTE Password-Retry 75 integer
ATTRIBUTE Prompt 76 integer
ATTRIBUTE Connect-Info 77 string
ATTRIBUTE Configuration-Token 78 string
ATTRIBUTE EAP-Message 79 string
ATTRIBUTE Message-Authenticator 80 octets
ATTRIBUTE ARAP-Challenge-Response 84 string # 10 octets
ATTRIBUTE Acct-Interim-Interval 85 integer
ATTRIBUTE NAS-Port-Id 87 string
ATTRIBUTE Framed-Pool 88 string
ATTRIBUTE NAS-IPv6-Address 95 octets # really IPv6
ATTRIBUTE Framed-Interface-Id 96 octets # 8 octets
ATTRIBUTE Framed-IPv6-Prefix 97 octets # stupid format
ATTRIBUTE Login-IPv6-Host 98 octets # really IPv6
ATTRIBUTE Framed-IPv6-Route 99 string
ATTRIBUTE Framed-IPv6-Pool 100 string
ATTRIBUTE Digest-Response 206 string
ATTRIBUTE Digest-Attributes 207 octets
ATTRIBUTE Fall-Through 500 integer
ATTRIBUTE Exec-Program 502 string
ATTRIBUTE Exec-Program-Wait 503 string
ATTRIBUTE User-Category 1029 string
ATTRIBUTE Group-Name 1030 string
ATTRIBUTE Huntgroup-Name 1031 string
ATTRIBUTE Simultaneous-Use 1034 integer
ATTRIBUTE Strip-User-Name 1035 integer
ATTRIBUTE Hint 1040 string
ATTRIBUTE Pam-Auth 1041 string
ATTRIBUTE Login-Time 1042 string
ATTRIBUTE Stripped-User-Name 1043 string
ATTRIBUTE Current-Time 1044 string
ATTRIBUTE Realm 1045 string
ATTRIBUTE No-Such-Attribute 1046 string
ATTRIBUTE Packet-Type 1047 integer
ATTRIBUTE Proxy-To-Realm 1048 string
ATTRIBUTE Replicate-To-Realm 1049 string
ATTRIBUTE Acct-Session-Start-Time 1050 date
ATTRIBUTE Acct-Unique-Session-Id 1051 string
ATTRIBUTE Client-IP-Address 1052 ipaddr
ATTRIBUTE Ldap-UserDn 1053 string
ATTRIBUTE NS-MTA-MD5-Password 1054 string
ATTRIBUTE SQL-User-Name 1055 string
ATTRIBUTE LM-Password 1057 octets
ATTRIBUTE NT-Password 1058 octets
ATTRIBUTE SMB-Account-CTRL 1059 integer
ATTRIBUTE SMB-Account-CTRL-TEXT 1061 string
ATTRIBUTE User-Profile 1062 string
ATTRIBUTE Digest-Realm 1063 string
ATTRIBUTE Digest-Nonce 1064 string
ATTRIBUTE Digest-Method 1065 string
ATTRIBUTE Digest-URI 1066 string
ATTRIBUTE Digest-QOP 1067 string
ATTRIBUTE Digest-Algorithm 1068 string
ATTRIBUTE Digest-Body-Digest 1069 string
ATTRIBUTE Digest-CNonce 1070 string
ATTRIBUTE Digest-Nonce-Count 1071 string
ATTRIBUTE Digest-User-Name 1072 string
ATTRIBUTE Pool-Name 1073 string
ATTRIBUTE Ldap-Group 1074 string
ATTRIBUTE Module-Success-Message 1075 string
ATTRIBUTE Module-Failure-Message 1076 string
# X99-Fast 1077 integer
ATTRIBUTE Rewrite-Rule 1078 string
ATTRIBUTE Sql-Group 1079 string
ATTRIBUTE Auth-Type 1000 integer
ATTRIBUTE Menu 1001 string
ATTRIBUTE Termination-Menu 1002 string
ATTRIBUTE Prefix 1003 string
ATTRIBUTE Suffix 1004 string
ATTRIBUTE Group 1005 string
ATTRIBUTE Crypt-Password 1006 string
ATTRIBUTE Connect-Rate 1007 integer
ATTRIBUTE Add-Prefix 1008 string
ATTRIBUTE Add-Suffix 1009 string
ATTRIBUTE Expiration 1010 date
ATTRIBUTE Autz-Type 1011 integer
VALUE Service-Type Login-User 1
VALUE Service-Type Framed-User 2
VALUE Service-Type Callback-Login-User 3
VALUE Service-Type Callback-Framed-User 4
VALUE Service-Type Outbound-User 5
VALUE Service-Type Administrative-User 6
VALUE Service-Type NAS-Prompt-User 7
VALUE Service-Type Authenticate-Only 8
VALUE Service-Type Callback-NAS-Prompt 9
VALUE Service-Type Call-Check 10
VALUE Service-Type Callback-Administrative 11
VALUE Framed-Protocol PPP 1
VALUE Framed-Protocol SLIP 2
VALUE Framed-Protocol ARAP 3
VALUE Framed-Protocol Gandalf-SLML 4
VALUE Framed-Protocol Xylogics-IPX-SLIP 5
VALUE Framed-Protocol X.75-Synchronous 6
VALUE Framed-Routing None 0
VALUE Framed-Routing Broadcast 1
VALUE Framed-Routing Listen 2
VALUE Framed-Routing Broadcast-Listen 3
VALUE Framed-Compression None 0
VALUE Framed-Compression Van-Jacobson-TCP-IP 1
VALUE Framed-Compression IPX-Header-Compression 2
VALUE Framed-Compression Stac-LZS 3
VALUE Login-Service Telnet 0
VALUE Login-Service Rlogin 1
VALUE Login-Service TCP-Clear 2
VALUE Login-Service PortMaster 3
VALUE Login-Service LAT 4
VALUE Login-Service X25-PAD 5
VALUE Login-Service X25-T3POS 6
VALUE Login-Service TCP-Clear-Quiet 7
VALUE Login-TCP-Port Telnet 23
VALUE Login-TCP-Port Rlogin 513
VALUE Login-TCP-Port Rsh 514
VALUE Acct-Status-Type Start 1
VALUE Acct-Status-Type Stop 2
VALUE Acct-Status-Type Interim-Update 3
VALUE Acct-Status-Type Alive 3
VALUE Acct-Status-Type Accounting-On 7
VALUE Acct-Status-Type Accounting-Off 8
# RFC 2867 Additional Status-Type Values
VALUE Acct-Status-Type Tunnel-Start 9
VALUE Acct-Status-Type Tunnel-Stop 10
VALUE Acct-Status-Type Tunnel-Reject 11
VALUE Acct-Status-Type Tunnel-Link-Start 12
VALUE Acct-Status-Type Tunnel-Link-Stop 13
VALUE Acct-Status-Type Tunnel-Link-Reject 14
VALUE Acct-Authentic RADIUS 1
VALUE Acct-Authentic Local 2
VALUE Termination-Action Default 0
VALUE Termination-Action RADIUS-Request 1
VALUE NAS-Port-Type Async 0
VALUE NAS-Port-Type Sync 1
VALUE NAS-Port-Type ISDN 2
VALUE NAS-Port-Type ISDN-V120 3
VALUE NAS-Port-Type ISDN-V110 4
VALUE NAS-Port-Type Virtual 5
VALUE NAS-Port-Type PIAFS 6
VALUE NAS-Port-Type HDLC-Clear-Channel 7
VALUE NAS-Port-Type X.25 8
VALUE NAS-Port-Type X.75 9
VALUE NAS-Port-Type G.3-Fax 10
VALUE NAS-Port-Type SDSL 11
VALUE NAS-Port-Type ADSL-CAP 12
VALUE NAS-Port-Type ADSL-DMT 13
VALUE NAS-Port-Type IDSL 14
VALUE NAS-Port-Type Ethernet 15
VALUE NAS-Port-Type xDSL 16
VALUE NAS-Port-Type Cable 17
VALUE NAS-Port-Type Wireless-Other 18
VALUE NAS-Port-Type Wireless-802.11 19
VALUE Acct-Terminate-Cause User-Request 1
VALUE Acct-Terminate-Cause Lost-Carrier 2
VALUE Acct-Terminate-Cause Lost-Service 3
VALUE Acct-Terminate-Cause Idle-Timeout 4
VALUE Acct-Terminate-Cause Session-Timeout 5
VALUE Acct-Terminate-Cause Admin-Reset 6
VALUE Acct-Terminate-Cause Admin-Reboot 7
VALUE Acct-Terminate-Cause Port-Error 8
VALUE Acct-Terminate-Cause NAS-Error 9
VALUE Acct-Terminate-Cause NAS-Request 10
VALUE Acct-Terminate-Cause NAS-Reboot 11
VALUE Acct-Terminate-Cause Port-Unneeded 12
VALUE Acct-Terminate-Cause Port-Preempted 13
VALUE Acct-Terminate-Cause Port-Suspended 14
VALUE Acct-Terminate-Cause Service-Unavailable 15
VALUE Acct-Terminate-Cause Callback 16
VALUE Acct-Terminate-Cause User-Error 17
VALUE Acct-Terminate-Cause Host-Request 18
#VALUE Tunnel-Type L2TP 3
#VALUE Tunnel-Medium-Type IP 1
VALUE Prompt No-Echo 0
VALUE Prompt Echo 1
VALUE Auth-Type Local 0
VALUE Auth-Type System 1
VALUE Auth-Type SecurID 2
VALUE Auth-Type Crypt-Local 3
VALUE Auth-Type Reject 4
VALUE Auth-Type ActivCard 5
VALUE Auth-Type EAP 6
VALUE Auth-Type ARAP 7
VALUE Auth-Type Ldap 252 # deleted due to
duplication below
VALUE Auth-Type Pam 253 # deleted due to
duplication below
VALUE Auth-Type Accept 254
VALUE Auth-Type PAP 1024
VALUE Auth-Type CHAP 1025
VALUE Auth-Type LDAP 1026
VALUE Auth-Type PAM 1027
VALUE Auth-Type MS-CHAP 1028
VALUE Auth-Type Kerberos 1029
VALUE Auth-Type CRAM 1030
VALUE Auth-Type NS-MTA-MD5 1031
VALUE Auth-Type CRAM 1032 # deleted due to
duplication above
VALUE Auth-Type SMB 1033
VALUE Autz-Type Local 0
VALUE Fall-Through No 0
VALUE Fall-Through Yes 1
VALUE Packet-Type Access-Request 1
VALUE Packet-Type Access-Accept 2
VALUE Packet-Type Access-Reject 3
VALUE Packet-Type Accounting-Request 4
VALUE Packet-Type Accounting-Response 5
VALUE Packet-Type Accounting-Status 6
VALUE Packet-Type Password-Request 7
VALUE Packet-Type Password-Accept 8
VALUE Packet-Type Password-Reject 9
VALUE Packet-Type Accounting-Message 10
VALUE Packet-Type Access-Challenge 11
VALUE Packet-Type Status-Server 12
VALUE Packet-Type Status-Client 13
==================================================================================
Ian Davies {02476 564662}
Internal (x740 4662)
IMS-SIPAC
Software Development Engineer
More information about the Freeradius-Users
mailing list