Question

[Chad Stanphill]

Thanks for the reply

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/usr/local/var"
 main: logdir = "/usr/local/var/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/usr/local/var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/usr/local/var/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
 main: user = "(null)"
 main: group = "(null)"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "clear"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: authtype = "MS-CHAP"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded preprocess
 preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
 preprocess: hints = "/usr/local/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
 files: usersfile = "/usr/local/etc/raddb/users"
 files: acctusersfile = "/usr/local/etc/raddb/acct_users"
 files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
 detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
 radutmp: filename = "/usr/local/var/log/radius/radutmp"
 radutmp: username = "%{Stripped-User-Name:-%{User-Name}}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.




This is what I get when I do PAP
rad_recv: Access-Request packet from host 63.137.246.178:3980, id=1,
length=53
        User-Name = "chadstanphill"
        User-Password = "test"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "chadstanphill", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
    users: Matched entry DEFAULT at line 154
    users: Matched entry chadstanphill at line 217
  modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
  rad_check_password:  Found Auth-Type System
auth: type "System"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  modcall[authenticate]: module "unix" returns notfound for request 0
modcall: leaving group authenticate (returns notfound) for request 0
auth: Failed to validate the user.



This is what I get when I do CHAP

rad_recv: Access-Request packet from host 63.137.246.178:3992, id=3,
length=54
        User-Name = "chadstanphill"
        CHAP-Password = 0x2563d531d21a5754154f1a2a08e6b7e920
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  rlm_chap: Setting 'Auth-Type := CHAP'
  modcall[authorize]: module "chap" returns ok for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "chadstanphill", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
    users: Matched entry DEFAULT at line 154
    users: Matched entry chadstanphill at line 217
  modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
  rad_check_password:  Found Auth-Type CHAP
auth: type "CHAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group CHAP for request 0
  rlm_chap: login attempt by "chadstanphill" with CHAP password
  rlm_chap: Using clear text password test for user chadstanphill
authentication.
  rlm_chap: chap user chadstanphill authenticated succesfully
  modcall[authenticate]: module "chap" returns ok for request 0
modcall: leaving group CHAP (returns ok) for request 0
Sending Access-Accept of id 3 to 63.137.246.178 port 3992
        User-Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-Address = 255.255.255.254
        Framed-Netmask = 255.255.255.255
        Framed-Routing = None
        Framed-Compression = Van-Jacobson-TCP-IP
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...



----- Original Message ----- 
From: "Josh Howlett" <josh.howlett at bristol.ac.uk>
To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
Sent: Wednesday, April 12, 2006 10:38 AM
Subject: Re: Question


> Chad Stanphill wrote:
> > I have been running Freeradius for a while but It can only use CHAP and
> > for some reason I can not get PAP to work.
> > I have the config set to the basic on most things.
> > Can anyone help me figure out if I am missing something
> > Thanks
>
> Please run freeradius in debug mode (radiusd -X) and post the output.
>
> best regards, josh.
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>