On Tue 29 Aug 2006 18:40, Marcel.De_Boer@alcatel.be wrote: > Hello, > > I'm trying to setup FreeRADIUS in a testing setup where the IP address > to which it binds needs to be set. The RADIUS server is loaded on-demand > on a number of machines, where almost all configuration is the same, > except for the IP address to which it needs to listen. > > Normally this would be setup in the configuration file, but this means > that either I can't have a centralized configuration file (which makes > things very complicated, as I'm trying to provide a standard service in > an experimental environment), or the configuration file needs to be > changed before every FreeRADIUS startup, which also is very inconvenient. > > I'd like to set it up with the commandline switch (-i <ip-addr>), but > this does not seem to work (tested on versions 0.2, 1.0.1 and 1.2): the > server only takes the address from the configuration file and completely > ignores the commandline switch. I do realise that the commandline switch > is deprecated, but is it possible to get this to work somehow? Firstly, you can always include a file with local config details. I believe that will solve your problem. Secondly, the command line switch should work I believe. If it doesn't we needs to look at it :-) -- Peter Nixon http://www.peternixon.net/ PGP Key: http://www.peternixon.net/public.asc
Attachment:
pgpt9hnvs3h6l.pgp
Description: PGP signature