| Hi all, I have built an Access Point with hostapd, and want to authenticate with FreeRADIUS via users file. I wnat to use MSCHAPv2 with PEAP and TLS. my eap.conf: eap { default_eap_type = peap timer_expire = 60 ignore_unknown_eap_types = no md5{ } leap{ } gtc{ auth-Type = PAP } tls{ privateprivate_key_password = whatever private_key_file = ${raddbdir}/certs/cert-srv.pem certificate_file = ${raddbdir}/certs/cert-srv.pem CA_file = ${raddbdir}/certs/demoCA/cacert.pem dh_file = /dev/null fragment_size = 1024 include_length = yes } peap { default_eap_type = mschapv2 } mschapv2{ } } my users file : test User-Password := "test123" RADIUS message : rad_recv: Access-Request packet from host 192.168.100.247:2055, id=242, length=151 User-Name = "test" NAS-IP-Address = 192.168.100.247 NAS-Port = 0 Called-Station-Id = "00-02-6F-23-86-93:testwlan" Calling-Station-Id = "00-0E-2E-89-44-8F" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300090174657374 Message-Authenticator = 0x9938df4722da9c4c77a585cf1740d5ad Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 3 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry test at line 1 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 242 to 192.168.100.247:2055 EAP-Message = 0x010400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd75423f6525fdaace27f2535ef014611 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.100.247:2055, id=243, length=240 User-Name = "test" NAS-IP-Address = 192.168.100.247 NAS-Port = 0 Called-Station-Id = "00-02-6F-23-86-93:testwlan" Calling-Station-Id = "00-0E-2E-89-44-8F" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0204005019800000004616030100410100003d03014587c6af195c3fedb8cea5b9600556a43091e389b2af29691ffbe412eb96478700001600040005000a000900640062000300060013001200630100 State = 0xd75423f6525fdaace27f2535ef014611 Message-Authenticator = 0x944c2fd4e01369d92e721a62300b6d6e Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 4 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry test at line 1 modcall[authorize]: module "files" returns ok for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate freeradius: relocation error: /usr/lib/freeradius/rlm_eap_peap-1.0.2.so: undefined symbol: eaptls_process So I have no idea.... Could someone help me? --------------------------Hirdetés-----------------------------
Akciós Szilveszteri ajánlatok |