Eap/TLS Problem !!

Emerson emerson at mslink.com.br
Tue Jun 20 14:09:02 CEST 2006


Dear Freeradius user's,

a cuple days i have a problem with my radius server, i can not 
authenticate clients.
Freeradius 1.1.1 with Eap/TLS + MYSQL running in slack 10.1
My radius client is a wl5460-AP and i use a pci wireless to auth in ap 
linked in my radius.

But now, my pci wireless link in AP, but nothing passes trought, "ping" 
not work for any local.

I try to execute freeradius in debug mode (radiusd -X), it only show 
this messages in loop.

I can not understand this errors.....

Anyone Can Help-me, i need this Radius Server Working.....Thak's to 
all......

Emerson

*****************************************************
 rlm_eap: EAP Identity
  rlm_eap: processing type tls
 rlm_eap_tls: Requiring client certificate
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 75
modcall: leaving group authenticate (returns handled) for request 75
Sending Access-Challenge of id 174 to 10.254.0.254 port 2053
        Framed-Compression := Van-Jacobson-TCP-IP
        Framed-Protocol := PPP
        Service-Type := Framed-User
        Framed-MTU := 1500
        EAP-Message = 0x014c00060d20
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xbdef72a1d8e3188e972218ab20f569f1
Finished request 75
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 74 ID 173 with timestamp 4497f091
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.254.0.254:2053, id=175, 
length=191
        User-Name = "usuario1"
        NAS-IP-Address = 10.254.0.254
        NAS-Port = 0
        Called-Station-Id = "004f62087474"
        Calling-Station-Id = "0014a53c478d"
        NAS-Identifier = "Realtek Access Point. 8181"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x024c000d017573756172696f31
        State = 0xbdef72a1d8e3188e972218ab20f569f1
        Message-Authenticator = 0x75c255ea144b5d1a2864236a85e01e83
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 76
  modcall[authorize]: module "preprocess" returns ok for request 76
  rlm_eap: EAP packet type response id 76 length 13
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 76
radius_xlat:  'usuario1'
rlm_sql (sql): sql_set_user escaped user --> 'usuario1'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM 
radcheck           WHERE Username = 'usuario1'           ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 3
radius_xlat:  'SELECT 
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op  
FROM radgroupcheck,usergroup WHERE usergroup.Username = 'usuario1' AND 
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM 
radreply           WHERE Username = 'usuario1'           ORDER BY id'
radius_xlat:  'SELECT 
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op  
FROM radgroupreply,usergroup WHERE usergroup.Username = 'usuario1' AND 
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 3
  modcall[authorize]: module "sql" returns ok for request 76
modcall: leaving group authorize (returns updated) for request 76
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 76
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
 rlm_eap_tls: Requiring client certificate
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 76
modcall: leaving group authenticate (returns handled) for request 76
Sending Access-Challenge of id 175 to 10.254.0.254 port 2053
        Framed-Compression := Van-Jacobson-TCP-IP
        Framed-Protocol := PPP
        Service-Type := Framed-User
        Framed-MTU := 1500
        EAP-Message = 0x014d00060d20
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x8576b5091495b6b611506711da5f4530
Finished request 76
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 75 ID 174 with timestamp 4497f096
Waking up in 5 seconds...




More information about the Freeradius-Users mailing list