Auth Problems 2 !!!

[Emerson <emerson@mslink.com.br>]

Hi,

The problem was a error in eap.conf, i change default eap to tls (and 
not md5), and work.
Now has a another problem, i try to authnticate, but this messages appear.
My radius client is a Access Point wl-5460AP with IP 10.254.0.254, and 
my pc with Airlink 802.11g authing in AP, my IP is 10.254.0.240.
I use freeradius with auth eap/tls in MYSQL.

Anyone can help me....

Thank's

Emerson

**********************************Out of radiusd 
-X**************************************************

Sending Access-Reject of id 54 to 10.254.0.254 port 2053
Waking up in 2 seconds...
rad_recv: Access-Request packet from host 10.254.0.254:2053, id=55, 
length=173
       User-Name = "usuario1"
       NAS-IP-Address = 10.254.0.254
       NAS-Port = 0
       Called-Station-Id = "004f62087474"
       Calling-Station-Id = "0014a53c478d"
       NAS-Identifier = "Realtek Access Point. 8181"
       Framed-MTU = 1400
       NAS-Port-Type = Wireless-802.11
       Service-Type = Framed-User
       Connect-Info = "CONNECT 11Mbps 802.11b"
       EAP-Message = 0x0200000d017573756172696f31
       Message-Authenticator = 0x7f0c4bd69d33ce3fe0cb757219d2f05e
 Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 18
 modcall[authorize]: module "preprocess" returns ok for request 18
 rlm_eap: EAP packet type response id 0 length 13
 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
 modcall[authorize]: module "eap" returns updated for request 18
radius_xlat:  'usuario1'
rlm_sql (sql): sql_set_user escaped user --> 'usuario1'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM 
radcheck           WHERE Username = 'usuario1'           ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 1
radius_xlat:  'SELECT 
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op  
FROM radgroupcheck,usergroup WHERE usergroup.Username = 'usuario1' AND 
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM 
radreply           WHERE Username = 'usuario1'           ORDER BY id'
radius_xlat:  'SELECT 
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op  
FROM radgroupreply,usergroup WHERE usergroup.Username = 'usuario1' AND 
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 1
 modcall[authorize]: module "sql" returns ok for request 18
modcall: leaving group authorize (returns updated) for request 18
 rad_check_password:  Found Auth-Type Local
auth: type Local
auth: No User-Password or CHAP-Password attribute in the request
auth: Failed to validate the user.
Login incorrect: [usuario1/<no User-Password attribute>] (from client 
mslink-radius port 0 cli 0014a53c478d)
Delaying request 18 for 1 seconds
Finished request 18
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 16 ID 53 with timestamp 4496c6c7
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 55 to 10.254.0.254 port 2053
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 17 ID 54 with timestamp 4496c6c9
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 18 ID 55 with timestamp 4496c6cc
Nothing to do.  Sleeping until we see a request.