could not determine local IP address

Italo Morellato italo at witel.it
Thu May 25 20:24:09 CEST 2006


Hi Alan and many thanks for the fast reply..
this is the report of radiusd -x command...
_________________________________________________________________

rad_recv: Access-Request packet from host 10.10.0.30:1144, id=37, length=130
        Service-Type = Framed-User
        Framed-Protocol = PPP
        NAS-Port = 1116
        NAS-Port-Type = Ethernet
        User-Name = "test"
        Calling-Station-Id = "00:15:D6:02:03:54"
        Called-Station-Id = "PPPoE"
        NAS-Port-Id = "wlan2"
        User-Password = "pqyqalxb"
        NAS-Identifier = "nas1"
        NAS-IP-Address = 10.10.0.30
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Released sql socket id: 4
rlm_sql (sql): Processing sql_postauth
rlm_sql (sql): Reserving sql socket id: 3
rlm_sql (sql): Released sql socket id: 3
Sending Access-Accept of id 37 to 10.10.0.30 port 1144
        Framed-Routing = Broadcast-Listen
        Framed-Pool = "pppoe-pool1"
        Framed-IP-Netmask = 255.255.255.0
rad_recv: Accounting-Request packet from host 10.10.0.30:1144, id=38, length=146
        Service-Type = Framed-User
        Framed-Protocol = PPP
        NAS-Port = 1116
        NAS-Port-Type = Ethernet
        User-Name = "test"
        Calling-Station-Id = "00:15:D6:02:03:54"
        Called-Station-Id = "PPPoE"
        NAS-Port-Id = "wlan2"
        Acct-Session-Id = "81100016"
        Framed-IP-Address = 10.0.0.220
        Acct-Authentic = RADIUS
        Acct-Status-Type = Start
        NAS-Identifier = "nas1"
        NAS-IP-Address = 10.10.0.30
        Acct-Delay-Time = 0
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql (sql): Released sql socket id: 2
Sending Accounting-Response of id 38 to 10.10.0.30 port 1144
rad_recv: Accounting-Request packet from host 10.10.0.30:1144, id=39, length=194
        Service-Type = Framed-User
        Framed-Protocol = PPP
        NAS-Port = 1116
        NAS-Port-Type = Ethernet
        User-Name = "testt"
        Calling-Station-Id = "00:15:D6:02:03:54"
        Called-Station-Id = "PPPoE"
        NAS-Port-Id = "wlan2"
        Acct-Session-Id = "81100016"
        Framed-IP-Address = 10.0.0.220
        Acct-Authentic = RADIUS
        Acct-Session-Time = 0
        Acct-Input-Octets = 72
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 6
        Acct-Output-Octets = 54
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 6
        Acct-Status-Type = Stop
        Acct-Terminate-Cause = NAS-Error
        NAS-Identifier = "nas1"
        NAS-IP-Address = 10.10.0.30
        Acct-Delay-Time = 0
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql (sql): Released sql socket id: 1
Sending Accounting-Response of id 39 to 10.10.0.30 port 1144
_______________________________________________________

at this point, in the Mikrotik log I see --> terminating... - could not determine local IP address 

Thanks in advance...



  ----- Original Message ----- 
  From: Alan DeKok 
  To: FreeRadius users mailing list 
  Sent: Wednesday, May 24, 2006 6:31 PM
  Subject: Re: could not determine local IP address 


  "Italo Morellato" <italo at witel.it> wrote:
  > my freeradius work fine with HotSpot but when I check ppp I've one
  > error.
  > Freeradius 1.1.1
  > Log is paste below...

    No, it's a PPP log.

    It looks like your PPP is broken.  Ask on a PPP list how to fix it.

    Alan DeKok.
  - 
  List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20060525/33a52b31/attachment.html>


More information about the Freeradius-Users mailing list