Zero Session-Timeout

[Rohaizam Abu Bakar]

Dear all,

Using FB 6.0, FR 1.0.5 (will upgrade soon)

I've problem with timeout...

I've set in users file as below in order to load timeout value depending on 
type of connection (ISDN/PSTN)

DEFAULT                 NAS-Port-Type == "Sync", Autz-Type := DIALUP, 
Auth-Type := DIALUP
                        Session-Timeout = 
`%{exec:/usr/local/etc/raddb/timeout.pl %U ISDN}`

DEFAULT                 NAS-Port-Type == "Async", Autz-Type := DIALUP, 
Auth-Type := DIALUP
                        Session-Timeout = 
`%{exec:/usr/local/etc/raddb/timeout.pl %U PSTN}`value

The problem is when "Session-Timeout =0", normally happen when script cannot 
load value... it will NOT timeout... user till can get connect until 
manually disconnect...


Below is the debug log...


Login OK: [integ36] (from client INFRANETTEST port 300 cli 55550000)
Sending Access-Accept of id 111 to 10.1.1.1:1645
        Session-Timeout = 0
        Framed-Compression = Van-Jacobson-TCP-IP
        Framed-MTU = 1500
        Framed-Protocol = PPP
        Service-Type = Framed-User
Finished request 89
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 10.1.1.1:1646, id=97, 
length=131
        Acct-Session-Id = "000000AE"
        Framed-Protocol = PPP
        User-Name = "integ36"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Start
        Calling-Station-Id = "55550000"
        Called-Station-Id = "2426"
        NAS-Port-Type = Async
        Connect-Info = "50667/24000 V90/V44/LAPM"
        NAS-Port = 300
        Service-Type = Framed-User
        NAS-IP-Address = 10.1.1.1
        Acct-Delay-Time = 0

.
.
.
.
rad_recv: Accounting-Request packet from host 10.1.1.1:1646, id=98, 
length=173
        Acct-Session-Id = "000000AE"
        Framed-Protocol = PPP
        Framed-IP-Address = 10.1.1.3
        User-Name = "integ36"
        Acct-Authentic = RADIUS
        Acct-Session-Time = 26
        Acct-Input-Octets = 8110
        Acct-Output-Octets = 4998
        Acct-Input-Packets = 92
        Acct-Output-Packets = 37
        Acct-Terminate-Cause = User-Request
        Acct-Status-Type = Stop
        Calling-Station-Id = "55550000"
        Called-Station-Id = "2426"
        NAS-Port-Type = Async
        Connect-Info = "50667/24000 V90/V44/LAPM"
        NAS-Port = 300
        Service-Type = Framed-User
        NAS-IP-Address = 10.1.1.1
        Acct-Delay-Time = 0