1.1.3 on Solaris 10 (sparc)

[Rafiqul Ahsan]

Hi Lin, and others

It worked with the path. I am able to build, and install the free radius on
Solaris 10. Thanks for your help.
I am planning to add EAP-AKA on the Free radius, as I understand this does
not support currently. Any idea where to start ?

Thanks for your help.

Rafi


On 9/6/06, Lin Richardson <lin at xmission.com> wrote:
>
> So to confirm the observations and comments above:
>
> My environment worked without any errors.  The following give some detail
> as to why.
>
> bash-3.00# which ar
> /usr/ccs/bin/ar
>
> bash-3.00# echo $PATH
> /usr/local/bin:/usr/bin:/usr/ccs/bin:/usr/sbin
>
> ar is a command line tool that is not in your path, so I guess ./configure
> sets it to false... and then tries to run it with the command "false".
> Fix your path to include the location of ar and you will probably have
> better results.  Thanks to the others on the list for catching this detail.
>
>
> It may be a good idea to add to the wiki as well.
>
>
> Lin
>
>
>
>
> On 9/6/06, Rafiqul Ahsan <rafiqul.ahsan at gmail.com > wrote:
> >
> >  Thanks to Lin, Mercel, and Rob for your input. I am not sure about
> > Mercel's comment on value of AR, this has been set to false in the Makefile
> > at libltdl/ directory (where it actually fails). The question is what value
> > should it be ?
> >
> > Also, Rob - when I put the /usr/ccs/bin/ on top of my PATH, it picks a
> > make that gives me error as "make: Fatal error in reader: Makefile, line 41:
> > Unexpected end of line seen". Wheras my earlier picks on make file from
> > /usr/local/bin - did not give me this error. Following is the various
> > command output FYI. Also - I could you please explain a little more on where
> > to put this get -R/path/to/dep alongside the -L linker flags (an example
> > would be appreciated). Is it needed to add on the Makefile on ./libltdl/
> > directory ?
> >
> > Thanks for your help.
> >
> > Rafi
> >
> >
> > # /usr/local/bin/make -v
> > GNU Make 3.80
> > Copyright (C) 2002  Free Software Foundation, Inc.
> > This is free software; see the source for copying conditions.
> > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE.
> > # /usr/ccs/bin/make -v
> > make: Warning: Ignoring DistributedMake -v option
> > make: Fatal error in reader: Makefile, line 41: Unexpected end of line
> > seen
> >
> > Here is my PATH (after I added /usr/ccs/bin - as suggested by Rob)
> > # echo $PATH
> > /usr/ccs/bin:/usr/sbin:/usr/bin:/usr/sfw/bin/:/usr/local/bin
> >
> >
> >
> >
> > On 9/6/06, Rob Shepherd <rob at techniumcast.com > wrote:
> > >
> > > Marcel.De_Boer at alcatel.be wrote:
> > > > Lin Richardson wrote:
> > > >> You should post this to thet userlist (I am cc'ing them on this
> > > >> reply).  Perhaps someone there has seen the "false cru" error
> > > before...
> > > >>
> > > >> I'm no compiler guru, but google tells me that libtool may be to
> > > >> blame. I don't acutally show libtool installed on my box and don't
> > > >> know much about it.
> > > > I'm no compiler guru either, but the system appears to be missing
> > > 'ar'
> > > > (I thought I remembered 'ar' being called with options 'cru' before,
> > > and
> > > > the config.log confirms this:)
> > >
> > > For solaris...
> > >
> > > Add /usr/ccs/bin to the top of your path.
> > >
> > > In addition, as mentioned in this thread. The preferable way of
> > > satisfying run time lib dependencies on solaris is by get
> > > -R/path/to/dep
> > > alongside the -L linker flags.
> > >
> > > Rob
> > >
> > >
> > >
> > >
> > > --
> > > Rob Shepherd | Computer and Network Engineer | Technium CAST | LL57
> > > 4HJ
> > > rob at techniumcast.com | 01248 675024 | 07776 210516
> > > -
> > > List info/subscribe/unsubscribe? See
> > > http://www.freeradius.org/list/users.html
> > >
> >
> >
> >
> > --
> > Rafiqul Ahsan                630-717-1698(h)
> > 2120 Periwinkle Ln         630-689-1457(h)
> > Naperville, IL 60540        847-812-6176(c)
> >
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> >
> >
> >
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>


-- 
Rafiqul Ahsan                630-717-1698(h)
2120 Periwinkle Ln         630-689-1457(h)
Naperville, IL 60540        847-812-6176(c)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20060906/a05c7cc0/attachment.html>