configuration

parfait kouassi nda ndaparfait at hotmail.com
Fri Apr 20 12:19:54 CEST 2007


my last coonfiguration  of these files is:
radiusd.conf
proxy_request = yes

proxy.conf
realm gie.local {
                     type     =  radius
                     authhost =  LOCAL
                     accthost  =  LOCAL
                     }

realm DEFAULT {
                       type     =  radius
                       authhost =  araignee.gie.local:1812
                       accthost  =  araignee.gie.local:1813
                       secret     =  parfait
                       nostrip
                       }

Clients.conf
client 192.168.0.2 {
                            secret = parfait
                            shortname  = araignee.gie.local
                            }

when i do configuration in all flies my freeradius reject my packets!
this is the show of radiusd -X!

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1812
main: allow_core_dumps = no
main: log_stripped_names = yes
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = yes
main: log_auth_badpass = yes
main: log_auth_goodpass = yes
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "nobody"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 0
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, 
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = 
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.


rad_recv: Access-Request packet from host 192.168.3.1:1812, id=19, 
length=130
	NAS-IP-Address = 192.168.3.1
	NAS-Port = 50001
	NAS-Port-Type = Ethernet
	User-Name = "picasso at gie.local"
	Calling-Station-Id = "00-A0-C9-DE-7A-FE"
	Service-Type = Framed-User
	Framed-MTU = 1000
	EAP-Message = 0x02020016017069636173736f406769652e6c6f63616c
	Message-Authenticator = 0x5aa9378c210f3cc9896ff7a4742bce77
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
    rlm_realm: Looking up realm "gie.local" for User-Name = 
"picasso at gie.local"
    rlm_realm: Found realm "gie.local"
    rlm_realm: Proxying request from user picasso to realm gie.local
    rlm_realm: Adding Realm = "gie.local"
    rlm_realm: Authentication realm is LOCAL.
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: EAP packet type response id 2 length 22
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 19 to 192.168.3.1 port 1812
	EAP-Message = 0x01030016041014292e9e4d0f780980b96f3ad2459504
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x020f058ccb95cbc717c1bb0f624b681b
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.3.1:1812, id=20, 
length=165
	NAS-IP-Address = 192.168.3.1
	NAS-Port = 50001
	NAS-Port-Type = Ethernet
	User-Name = "picasso at gie.local"
	Calling-Station-Id = "00-A0-C9-DE-7A-FE"
	Service-Type = Framed-User
	Framed-MTU = 1000
	State = 0x020f058ccb95cbc717c1bb0f624b681b
	EAP-Message = 
0x020300270410e10ab8e5381c81c7806d8dbe102936fa7069636173736f406769652e6c6f63616c
	Message-Authenticator = 0xd4268d3dbb7397a0ff40d4c74b040f9d
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
  modcall[authorize]: module "chap" returns noop for request 1
    rlm_realm: Looking up realm "gie.local" for User-Name = 
"picasso at gie.local"
    rlm_realm: Found realm "gie.local"
    rlm_realm: Proxying request from user picasso to realm gie.local
    rlm_realm: Adding Realm = "gie.local"
    rlm_realm: Authentication realm is LOCAL.
  modcall[authorize]: module "suffix" returns noop for request 1
  rlm_eap: EAP packet type response id 3 length 39
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 1
modcall: leaving group authorize (returns updated) for request 1
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/md5
  rlm_eap: processing type md5
rlm_eap_md5: User-Password is required for EAP-MD5 authentication
rlm_eap: Handler failed in EAP/md5
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 1
modcall: leaving group authenticate (returns invalid) for request 1
auth: Failed to validate the user.
Login incorrect: [picasso at gie.local/<no User-Password attribute>] (from 
client Switch port 50001 cli 00-A0-C9-DE-7A-FE)
Delaying request 1 for 1 seconds
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.3.1:1812, id=20, 
length=165
Sending Access-Reject of id 20 to 192.168.3.1 port 1812
	EAP-Message = 0x04030004
	Message-Authenticator = 0x00000000000000000000000000000000
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 19 with timestamp 46288d79
Cleaning up request 1 ID 20 with timestamp 46288d79
Nothing to do.  Sleeping until we see a request.

_________________________________________________________________
MSN Hotmail : créez votre adresse e-mail gratuite & à vie ! 
http://www.msn.fr/newhotmail/Default.asp?Ath=f




More information about the Freeradius-Users mailing list