User /etc/shadow for Authentication

tnt at kalik.co.yu tnt at kalik.co.yu
Thu Apr 26 00:55:09 CEST 2007


Login OK: [tester] (from client test-network port 1 cli 10.0.0.1)
Sending Access-Accept of id 27 to 10.0.0.2:1645

You have "got in". But you haven't returned any radius attributes. You
need to return something like Service-Type = Administrative-User or
NAS-Prompt-User so NAS knows what to do with the user.

Ivan Kalik
Kaliik Informatika ISP


Dana 25/4/2007, "Norman Zhang" <norman.zhang at gmail.com> piše:

>Dennis Skinner wrote:
>> Make sure you are *only* using PAP.  CHAP encrypts the password over the
>> wire and you cannot compare crypt to crypt.  One of them needs to be
>> cleartext (this is a limitation of encryption, not FreeRADIUS).  See the
>> table here:
>>
>> http://deployingradius.com/documents/protocols/compatibility.html
>>
>> (you are using Unix Crypt).
>
>
>I changed
>
>pap {
>	encryption_scheme = clear  # was crypt
>}
>
>chap {
>	authtype = pap    # was CHAP
>}
>
>pam {
>	pam_auth = radiusd
>}
>
>unix {
>	cache = no
>	cache_reload = 600
>	passwd = /etc/passwd
>	shadow = /etc/shadow
>	group = /etc/group
>	radwtmp = ${logdir}/radwtmp
>}
>
>but I still cannot get in.
>
>rad_recv: Access-Request packet from host 10.0.0.2:1645, id=27, length=79
>         NAS-IP-Address = 10.0.0.2
>         NAS-Port = 1
>         NAS-Port-Type = Virtual
>         User-Name = "tester"
>         Calling-Station-Id = "10.0.0.1"
>         User-Password = "testing123"
>   Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 0
>   modcall[authorize]: module "preprocess" returns ok for request 0
>   modcall[authorize]: module "chap" returns noop for request 0
>   modcall[authorize]: module "mschap" returns noop for request 0
>     rlm_realm: No '@' in User-Name = "tester", looking up realm NULL
>     rlm_realm: No such realm "NULL"
>   modcall[authorize]: module "suffix" returns noop for request 0
>   rlm_eap: No EAP-Message, not doing EAP
>   modcall[authorize]: module "eap" returns noop for request 0
>     users: Matched DEFAULT at 152
>   modcall[authorize]: module "files" returns ok for request 0
>modcall: group authorize returns ok for request 0
>   rad_check_password:  Found Auth-Type System
>auth: type "System"
>   Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 0
>   modcall[authenticate]: module "unix" returns ok for request 0
>modcall: group authenticate returns ok for request 0
>Login OK: [tester] (from client test-network port 1 cli 10.0.0.1)
>Sending Access-Accept of id 27 to 10.0.0.2:1645
>Finished request 0
>Going to the next request
>
>---
>
>Starting - reading configuration files ...
>reread_config:  reading radiusd.conf
>Config:   including file: /etc/raddb/proxy.conf
>Config:   including file: /etc/raddb/clients.conf
>Config:   including file: /etc/raddb/snmp.conf
>Config:   including file: /etc/raddb/eap.conf
>Config:   including file: /etc/raddb/sql.conf
>  main: prefix = "/usr"
>  main: localstatedir = "/var"
>  main: logdir = "/var/log/radius"
>  main: libdir = "/usr/lib"
>  main: radacctdir = "/var/log/radius/radacct"
>  main: hostname_lookups = no
>  main: max_request_time = 30
>  main: cleanup_delay = 5
>  main: max_requests = 1024
>  main: delete_blocked_requests = 0
>  main: port = 0
>  main: allow_core_dumps = no
>  main: log_stripped_names = no
>  main: log_file = "/var/log/radius/radius.log"
>  main: log_auth = yes
>  main: log_auth_badpass = no
>  main: log_auth_goodpass = no
>  main: pidfile = "/var/run/radiusd/radiusd.pid"
>  main: user = "radiusd"
>  main: group = "radiusd"
>  main: usercollide = no
>  main: lower_user = "no"
>  main: lower_pass = "no"
>  main: nospace_user = "no"
>  main: nospace_pass = "no"
>  main: checkrad = "/usr/sbin/checkrad"
>  main: proxy_requests = yes
>  proxy: retry_delay = 5
>  proxy: retry_count = 3
>  proxy: synchronous = no
>  proxy: default_fallback = yes
>  proxy: dead_time = 120
>  proxy: post_proxy_authorize = yes
>  proxy: wake_all_if_all_dead = no
>  security: max_attributes = 200
>  security: reject_delay = 1
>  security: status_server = no
>  main: debug_level = 0
>read_config_files:  reading dictionary
>read_config_files:  reading naslist
>Using deprecated naslist file.  Support for this will go away soon.
>read_config_files:  reading clients
>read_config_files:  reading realms
>radiusd:  entering modules setup
>Module: Library search path is /usr/lib
>Module: Loaded exec
>  exec: wait = yes
>  exec: program = "(null)"
>  exec: input_pairs = "request"
>  exec: output_pairs = "(null)"
>  exec: packet_type = "(null)"
>rlm_exec: Wait=yes but no output defined. Did you mean output=none?
>Module: Instantiated exec (exec)
>Module: Loaded expr
>Module: Instantiated expr (expr)
>Module: Loaded PAP
>  pap: encryption_scheme = "clear"
>Module: Instantiated pap (pap)
>Module: Loaded CHAP
>Module: Instantiated chap (chap)
>Module: Loaded MS-CHAP
>  mschap: use_mppe = yes
>  mschap: require_encryption = no
>  mschap: require_strong = no
>  mschap: with_ntdomain_hack = no
>  mschap: passwd = "(null)"
>  mschap: authtype = "MS-CHAP"
>  mschap: ntlm_auth = "(null)"
>Module: Instantiated mschap (mschap)
>Module: Loaded System
>  unix: cache = no
>  unix: passwd = "/etc/passwd"
>  unix: shadow = "/etc/shadow"
>  unix: group = "/etc/group"
>  unix: radwtmp = "/var/log/radius/radwtmp"
>  unix: usegroup = no
>  unix: cache_reload = 600
>Module: Instantiated unix (unix)
>Module: Loaded eap
>  eap: default_eap_type = "md5"
>  eap: timer_expire = 60
>  eap: ignore_unknown_eap_types = no
>  eap: cisco_accounting_username_bug = no
>rlm_eap: Loaded and initialized type md5
>rlm_eap: Loaded and initialized type leap
>  gtc: challenge = "Password: "
>  gtc: auth_type = "PAP"
>rlm_eap: Loaded and initialized type gtc
>  mschapv2: with_ntdomain_hack = no
>rlm_eap: Loaded and initialized type mschapv2
>Module: Instantiated eap (eap)
>Module: Loaded preprocess
>  preprocess: huntgroups = "/etc/raddb/huntgroups"
>  preprocess: hints = "/etc/raddb/hints"
>  preprocess: with_ascend_hack = no
>  preprocess: ascend_channels_per_line = 23
>  preprocess: with_ntdomain_hack = no
>  preprocess: with_specialix_jetstream_hack = no
>  preprocess: with_cisco_vsa_hack = no
>Module: Instantiated preprocess (preprocess)
>Module: Loaded realm
>  realm: format = "suffix"
>  realm: delimiter = "@"
>  realm: ignore_default = no
>  realm: ignore_null = no
>Module: Instantiated realm (suffix)
>Module: Loaded files
>  files: usersfile = "/etc/raddb/users"
>  files: acctusersfile = "/etc/raddb/acct_users"
>  files: preproxy_usersfile = "/etc/raddb/preproxy_users"
>  files: compat = "no"
>Module: Instantiated files (files)
>Module: Loaded Acct-Unique-Session-Id
>  acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
>Client-IP-Address, NAS-Port"
>Module: Instantiated acct_unique (acct_unique)
>Module: Loaded detail
>  detail: detailfile =
>"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
>  detail: detailperm = 384
>  detail: dirperm = 493
>  detail: locking = no
>Module: Instantiated detail (detail)
>Module: Loaded radutmp
>  radutmp: filename = "/var/log/radius/radutmp"
>  radutmp: username = "%{User-Name}"
>  radutmp: case_sensitive = yes
>  radutmp: check_with_nas = yes
>  radutmp: perm = 384
>  radutmp: callerid = yes
>Module: Instantiated radutmp (radutmp)
>Listening on authentication *:1812
>Listening on accounting *:1813
>Listening on proxy *:1814
>Ready to process requests.
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>




More information about the Freeradius-Users mailing list