Re: How to add attributes to Access-Accept replies

[Lucien RENAULT <loupitour@gmail.com>]

Yes indeed, I changed the default entries of the users.conf because 
freeradius wasn't replying with the attributes so I tried many tricks in 
order to improve this but I never managed to get those attributes in 
Access-Accept packets...
I also modified the ldap section of radiusd.conf but this one is working 
fine so I guess I wont have to change this anymore.
I really think the problem comes from this users.conf file but I really 
can't figure out why the modifications I bring to this file don't affect 
radius behavior. Are there options I'm missing in other conf files maybe ?


tnt@kalik.co.yu wrote:
> Default users file has DEFAULT entries for that Service-Type and
> protocol. Default radiusd.conf uses files. You have changed the defaults
> and it's not working anymore. In default configuration make changes
> only to the ldap section and leave the rest as it was.
>
> Ivan Kalik
> Kalik Informatika ISP
>
>
> Dana 10/12/2007, "Lucien RENAULT" <loupitour@gmail.com> piše:
>
>   
> > Hi,
> > I'm running a configuration where a Cisco 1600 router is running a PPPoE
> > server and check user passwords against a freeRadius server running
> > under FreeBSD.
> > This Radius server checks passwords against a LDAP database running on
> > another BSD server.
> > The authentication is working great, the Radius replies with an
> > "Access-Accept" reply to the Cisco router but it seems that the router
> > needs two attributes to accept this reply :
> >
> > Service-Type = Framed-User,
> > Framed-Protocol = PPP,
> >
> > So I did the following configuration in users.conf :
> >
> > DEFAULT Framed-Protocol == PPP
> >    Service-Type = Framed-User,
> >    Framed-Protocol = PPP,
> >    Fall-Through = Yes
> >
> > But freeradius still replies with no attributes in Access-Accept
> > packet... I read a lot of documentation about this and I'm quite
> > confused since I don't really see any other mean to add attributes to
> > replies...
> >
> > Any Ideas ?
> >
> > Thanks
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> >
> >
> >     
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>