2007/12/18, Alan DeKok <aland@deployingradius.com>:
Gianni Socionovo wrote:
> I set up a free radius server (IP 10.1.1.1) and i
> checked that is on.
> I set up a wireless access point (D-LINK DLW3200 AP, IP
10.1.1.2)
> with wpa2-enterprise authentication settings.
> In the screen of DWL authentication setting i set 10.1.1.1 as
> radius server and "radiussecret" as Radius Secret.
> In freeradius configuration file clients.conf i added the following:
>
> client
> 10.1.1.2 {
Is it really on two lines like that? If so, why?
No in clients.conf all is only in one line.
...
> I lauched the command:
>
> radtest test testpwd
> 10.1.1.2 0 radiussecret and i got the following message:
>
> radclient: no response from server for ID xx.
Is the RADIUS server *running*? Have you tried starting it from the
command-line in debugging mode, as suggested in the README, FAQ,
INSTALL, and daily on this list?
I launched radiu server with command freeradius -XXX -A and i got no errors.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html