freeradius sql /mssql

[Andrew D]

Dennis Skinner wrote:
> Andrew D wrote:
> 
>> Basically, depending on the huntgroup I need to send different reply 
>> attributes (different NAS types) and if the DB returns the group 
>> suspend, different reply attributes are sent.
> 
> I don't fully understand what you are trying to do and you snipped a lot

We are a little ISP, we have a bunch of lines on the local network, and 
outsource our dsl and national lines.  We have a patton here and cisco 
NASes at the outsourced mob.

If a user dials into the patton then they get a basic setup of 
framed-user session-timeout etc.  if they come in via the cisco then 
they get same basic setup as the patton + a bunch of cisco-avpairs.

If however they are in the 'suspend' group and they dial into the patton 
then they get  a 172.16.* ip or if they dial into the ciscos, they get a 
different set of cisco-avpairs.

> of the debug log, but if the group is in sql, then the huntgroup file

full debug :)


Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
  main: prefix = "/usr/local"
  main: localstatedir = "/var"
  main: logdir = "/var/log"
  main: libdir = "/usr/local/lib"
  main: radacctdir = "/var/log/radacct"
  main: hostname_lookups = no
  main: max_request_time = 30
  main: cleanup_delay = 5
  main: max_requests = 1024
  main: delete_blocked_requests = 0
  main: port = 0
  main: allow_core_dumps = no
  main: log_stripped_names = no
  main: log_file = "/var/log/radius.log"
  main: log_auth = yes
  main: log_auth_badpass = yes
  main: log_auth_goodpass = no
  main: pidfile = "/var/run/radiusd/radiusd.pid"
  main: user = "nobody"
  main: group = "nobody"
  main: usercollide = no
  main: lower_user = "after"
  main: lower_pass = "after"
  main: nospace_user = "after"
  main: nospace_pass = "after"
  main: checkrad = "/usr/local/sbin/checkrad"
  main: proxy_requests = no
  proxy: retry_delay = 5
  proxy: retry_count = 3
  proxy: synchronous = no
  proxy: default_fallback = yes
  proxy: dead_time = 120
  proxy: post_proxy_authorize = no
  proxy: wake_all_if_all_dead = no
  security: max_attributes = 200
  security: reject_delay = 0
  security: status_server = no
  main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
read_config_files:  reading clients
read_config_files:  reading realms
Using deprecated realms file.  Support for this will go away soon.
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
  exec: wait = yes
  exec: program = "(null)"
  exec: input_pairs = "request"
  exec: output_pairs = "(null)"
  exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
  pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
  mschap: use_mppe = yes
  mschap: require_encryption = no
  mschap: require_strong = no
  mschap: with_ntdomain_hack = no
  mschap: passwd = "(null)"
  mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded eap
  eap: default_eap_type = "md5"
  eap: timer_expire = 60
  eap: ignore_unknown_eap_types = no
  eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
  gtc: challenge = "Password: "
  gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
  mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
  preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
  preprocess: hints = "/usr/local/etc/raddb/hints"
  preprocess: with_ascend_hack = no
  preprocess: ascend_channels_per_line = 23
  preprocess: with_ntdomain_hack = no
  preprocess: with_specialix_jetstream_hack = no
  preprocess: with_cisco_vsa_hack = no
  preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
  realm: format = "suffix"
  realm: delimiter = "@"
  realm: ignore_default = no
  realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded SQL
  sql: driver = "rlm_sql_mysql"
  sql: server = "localhost"
  sql: port = ""
  sql: login = "root"
  sql: password = ""
  sql: radius_db = "radius"
  sql: nas_table = "nas"
  sql: sqltrace = no
  sql: sqltracefile = "/var/log/sqltrace.sql"
  sql: readclients = no
  sql: deletestalesessions = yes
  sql: num_sql_socks = 5
  sql: sql_user_name = "%{User-Name}"
  sql: default_user_profile = ""
  sql: query_on_not_found = no
  sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, 
op           FROM radcheck           WHERE Username = '%{SQL-User-Name}' 
           ORDER BY id"
  sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, 
op           FROM radreply           WHERE Username = '%{SQL-User-Name}' 
           ORDER BY id"
  sql: authorize_group_check_query = "SELECT 
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op 
  FROM radgroupcheck,usergroup WHERE usergroup.Username = 
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName 
ORDER BY radgroupcheck.id"
  sql: authorize_group_reply_query = "SELECT 
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op 
  FROM radgroupreply,usergroup WHERE usergroup.Username = 
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName 
ORDER BY radgroupreply.id"
  sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', 
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), 
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = 
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND 
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
  sql: accounting_update_query = "UPDATE radacct           SET 
FramedIPAddress = '%{Framed-IP-Address}',           AcctSessionTime = 
'%{Acct-Session-Time}',           AcctInputOctets = 
'%{Acct-Input-Octets}',           AcctOutputOctets = 
'%{Acct-Output-Octets}'           WHERE AcctSessionId = 
'%{Acct-Session-Id}'           AND UserName = '%{SQL-User-Name}' 
    AND NASIPAddress= '%{NAS-IP-Address}'"
  sql: accounting_update_query_alt = "INSERT into radacct 
(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, 
NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, 
ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, 
CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, 
AcctStartDelay) values('%{Acct-Session-Id}', 
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', 
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', 
DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) 
SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', 
'%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', 
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', 
'%{Framed-IP-Address}', '0')"
  sql: accounting_start_query = "INSERT into radacct (AcctSessionId, 
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, 
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, 
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, 
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, 
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) 
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', 
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', 
'%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', 
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', 
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', 
'%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
  sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = 
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = 
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND 
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
  sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', 
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = 
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', 
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = 
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE 
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' 
AND NASIPAddress = '%{NAS-IP-Address}'"
  sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, 
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, 
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, 
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, 
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, 
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) 
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', 
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', 
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + 
%{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', 
'%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', 
'%{Acct-Output-Octets}', '%{Called-Station-Id}', 
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', 
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
  sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE 
UserName='%{SQL-User-Name}'"
  sql: connect_failure_retry_delay = 30
  sql: simul_count_query = ""
  sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, 
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, 
FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND 
AcctStopTime = 0"
  sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, 
date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', 
'%{reply:Packet-Type} %{Module-Failure-Message}', NOW())"
  sql: safe-characters = 
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to root at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded files
  files: usersfile = "/usr/local/etc/raddb/users"
  files: acctusersfile = "/usr/local/etc/raddb/acct_users"
  files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
  files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
  acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, 
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
  detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
  detail: detailperm = 384
  detail: dirperm = 493
  detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
  radutmp: filename = "/var/log/radutmp"
  radutmp: username = "%{User-Name}"
  radutmp: case_sensitive = yes
  radutmp: check_with_nas = yes
  radutmp: perm = 384
  radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.


rad_recv: Access-Request packet from host 192.168.202.99:1066, id=0, 
length=111
         User-Name = "awd"
         CHAP-Password = 0x4353f490bdd471db230b3a798e4cdc98ec
         NAS-Port = 8
         NAS-Port-Type = Async
         NAS-Identifier = ""Patton2960""
         Called-Station-Id = ""81122000""
         Calling-Station-Id = ""unknown""
         Framed-Protocol = PPP
         Service-Type = Framed-User
         NAS-IP-Address = 203.57.204.190
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
   modcall[authorize]: module "preprocess" returns ok for request 0
   rlm_chap: Setting 'Auth-Type := CHAP'
   modcall[authorize]: module "chap" returns ok for request 0
   modcall[authorize]: module "mschap" returns noop for request 0
     rlm_realm: No '@' in User-Name = "awd", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 0
   rlm_eap: No EAP-Message, not doing EAP
   modcall[authorize]: module "eap" returns noop for request 0
radius_xlat:  'awd'
rlm_sql (sql): sql_set_user escaped user --> 'awd'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM 
radcheck           WHERE Username = 'awd'           ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat:  'SELECT 
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op 
  FROM radgroupcheck,usergroup WHERE usergroup.Username = 'awd' AND 
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM 
radreply           WHERE Username = 'awd'           ORDER BY id'
radius_xlat:  'SELECT 
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op 
  FROM radgroupreply,usergroup WHERE usergroup.Username = 'awd' AND 
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
   modcall[authorize]: module "sql" returns ok for request 0
     users: Matched entry DEFAULT at line 26
     users: Matched entry DEFAULT at line 66
     users: Matched entry DEFAULT at line 84
   modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
   rad_check_password:  Found Auth-Type CHAP
auth: type "CHAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group CHAP for request 0
   rlm_chap: login attempt by "awd" with CHAP password
   rlm_chap: Using clear text password start for user awd authentication.
   rlm_chap: chap user awd authenticated succesfully
   modcall[authenticate]: module "chap" returns ok for request 0
modcall: leaving group CHAP (returns ok) for request 0
   Processing the session section of radiusd.conf
modcall: entering group session for request 0
radius_xlat:  '/var/log/radutmp'
radius_xlat:  'awd'
   modcall[session]: module "radutmp" returns ok for request 0
modcall: leaving group session (returns ok) for request 0
Login OK: [awd] (from client awd port 8 cli "unknown")
Sending Access-Accept of id 0 to 192.168.202.99 port 1066
         Session-Timeout := 43200
         Port-Limit := 1
         Framed-MTU = 1476
         Service-Type = Framed-User
         Framed-Protocol = PPP
         Framed-Compression = Van-Jacobson-TCP-IP
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...


hungroups file

test          NAS-IP-ADDRESS == 203.57.204.190

testbad       NAS-IP-ADDRESS == 203.57.204.190
                 SQL-Group = suspend


users file


#
# This is a complete entry for "steve". Note that there is no Fall-Through
# entry so that no DEFAULT entry will be used, and the user will NOT
# get any attributes in addition to the ones listed here.
#

#awd    Auth-Type := Local, User-Password == "blah"
#       Fall-Through = Yes


DEFAULT  Group == "suspend"
          Framed-IP-Address := 172.16.32.0+,
          Port-Limit := 1

DEFAULT  Huntgroup-Name == "testbad"
          Framed-IP-Address := 172.16.32.0+,
          Port-Limit := 1


DEFAULT  Huntgroup-Name == "test"
          Port-Limit := 20,
          Fall-Through = 1




> should look something like this:
> 
> testbad       NAS-IP-ADDRESS == some.ip
>  	      SQL-Group = suspend
>               ^^^^
> 
> Hopefully that helps....
> 

Sorry, that didn't work either :(




-- 
Network Administrator / Manager
Webzone Internet

1st Floor (Oakley Street Entrance)
167 Grote Street
Adelaide SA, 5000

Phone 1300 303 932
Fax   08 8221 6204
Email andrewd at webzone.net.au
       manager at webzone.net.au