Re: VLAN assigment and Alcatel Omniswitch 7800

[Santa Yeh <santayeh@ms32.hinet.net>]

Hello Oxiel,

Are you doing AVLAN or 802.1x?

1. I created a new file - dictionary.alcatel

#
# dictionary.alcatel
#
#           Alcatel VSAs
#          

VENDOR        Alcatel        800

#
# Standard attribute
#
ATTRIBUTE    Alcatel-Auth-Group    1    integer        Alcatel
ATTRIBUTE    Alcatel-Slot-Port    2    string        Alcatel
ATTRIBUTE    Alcatel-Time-of-Day    3    string        Alcatel
ATTRIBUTE    Alcatel-Client-IP-Addr    4    ipaddr        Alcatel
ATTRIBUTE    Alcatel-Group-Desc    5    string        Alcatel
ATTRIBUTE    Alcatel-Port-Desc    6    string        Alcatel

VALUE        Acct-Authentic        AUTH-AVCLIENT    4
VALUE        Acct-Authentic        AUTH-TELNET    5
VALUE        Acct-Authentic        AUTH-HTTP    6

2. For users file

user1        Auth-Type := Local, Password = "user1"
                Alcatel-Auth-Group = 3

3. For AVLAN

vlan 3 authentication enable
vlan port mobile 1/1 bpdu ignore enable
vlan port 1/1 authenticate enable
ip interface vlan3 address 192.168.11.254 mask 255.255.255.0 vlan 3
aaa radius-server rad1 host 192.168.10.211 key radkey
aaa authentication vlan single-mode rad1
aaa accounting vlan rad1
aaa avlan default dhcp 192.168.11.254
aaa avlan dns alcatel
avlan 3 auth-ip 192.168.11.253

4. For 802.1x (Sorry, just from my memory)

vlan 3 802.1x enable
vlan port mobile 1/1 bpdu ignore enable
vlan port 1/1 802.1x enable
ip interface vlan3 address 192.168.11.254 mask 255.255.255.0 vlan 3
aaa radius-server rad1 host 192.168.10.211 key radkey
aaa authentication 802.1x rad1
aaa accounting 802/1x rad1

Regards,
Santa Yeh

Oxiel Contreras 提到:

Hello Santa.

El Domingo, 11 de Febrero de 2007 22:57, Santa Yeh escribió:
  

You can not use the standard attributes :

Tunnel-Type:0 += VLAN
Tunnel-Medium-Type:0 += IEEE-802
Tunnel-Private-Group-Id:0 += "3"

The VSA for Alcatel switches is Alcatel-Auth-Group, that is why you
should check the user manual.
    

I've added the Alcatel-Auth-Group attribute to dictionary.alcatel like these:

ATTRIBUTE       Alcatel-Auth-Group                      134     integer

and modified users file like these:

Tunnel-Type += 13,
Tunnel-Medium-Type += 6,
Alcatel-Auth-Group += 3

now i see the Access-Accept part of the log which is sent it with the 
attribute, but nothing happens.

Sending Access-Accept of id 181 to 192.168.10.20 port 1074
        Tunnel-Type:0 += VLAN
        Tunnel-Medium-Type:0 += IEEE-802
        Alcatel-Auth-Group += 3
        MS-MPPE-Recv-Key = 
0xc90404d5af28944ae97417b2336cf56e204fe5afab5c7c7e7e50045ec24473b3
        MS-MPPE-Send-Key = 
0xc990b966cc4bed66c7be062e54795ddb253efe28c8426ecbb298d302c64b9359
        EAP-Message = 0x030d0004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "MYDOMAIN\\jose"
Finished request 8

Could you please pass me the relevant parts of your switch setup ?

vlan port mobile
vlan authentication
aaa

Is it necessary to defina vlan rules on the switch in order to move the mobile 
port to the vlan designed with Alcatel-Auth-Group ?

Thanks and best regards

Oxiel
Chiacchiera con i tuoi amici in tempo reale! 
 http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com 

- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html