Re: 3Com-User-Access-Level Not Applied
Thanks Alan
the files resquested are attached
[root@resolution ~]# /usr/local/sbin/radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/clients.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.0.30:5001, id=0, length=113
User-Name = "asoares"
User-Password = "copycat"
NAS-IP-Address = 192.168.0.30
NAS-Identifier = "0012a9a173c2"
NAS-Port = 268439553
NAS-Port-Type = Ethernet
Service-Type = Login-User
Login-IP-Host = 192.168.0.30
Calling-Station-Id = "0000-0000-0000"
Framed-IP-Address = 192.168.0.118
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
rlm_realm: No '@' in User-Name = "asoares", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
users: Matched entry DEFAULT at line 152
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type System
auth: type "System"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
modcall[authenticate]: module "unix" returns ok for request 0
modcall: leaving group authenticate (returns ok) for request 0
Sending Access-Accept of id 0 to 192.168.0.30 port 5001
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 192.168.0.30:5001, id=0, length=116
User-Name = "asoares"
NAS-Identifier = "0012a9a173c2"
NAS-Port = 268439553
NAS-Port-Type = Ethernet
Calling-Station-Id = "0000-0000-0000"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Acct-Session-Id = "1100030123581"
Framed-IP-Address = 192.168.0.118
NAS-IP-Address = 192.168.0.30
Event-Timestamp = "Apr 1 2000 20:58:22 BRT"
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 1
modcall[preacct]: module "preprocess" returns noop for request 1
rlm_acct_unique: Hashing 'NAS-Port = 268439553,Client-IP-Address = 192.168.0.30,NAS-IP-Address = 192.168.0.30,Acct-Session-Id = "1100030123581",User-Name = "asoares"'
rlm_acct_unique: Acct-Unique-Session-ID = "eb49d1a90caa7493".
modcall[preacct]: module "acct_unique" returns ok for request 1
rlm_realm: No '@' in User-Name = "asoares", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[preacct]: module "suffix" returns noop for request 1
modcall[preacct]: module "files" returns noop for request 1
modcall: leaving group preacct (returns ok) for request 1
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 1
radius_xlat: '/usr/local/var/log/radius/radacct/192.168.0.30/detail-20070118'
rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.0.30/detail-20070118
modcall[accounting]: module "detail" returns ok for request 1
modcall[accounting]: module "unix" returns ok for request 1
radius_xlat: '/usr/local/var/log/radius/radutmp'
radius_xlat: 'asoares'
modcall[accounting]: module "radutmp" returns ok for request 1
modcall: leaving group accounting (returns ok) for request 1
Sending Accounting-Response of id 0 to 192.168.0.30 port 5001
Finished request 1
Going to the next request
Cleaning up request 1 ID 0 with timestamp 45b00aa7
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 192.168.0.30:5001, id=1, length=170
User-Name = "asoares"
NAS-Identifier = "0012a9a173c2"
NAS-Port = 268439553
NAS-Port-Type = Ethernet
Calling-Station-Id = "0000-0000-0000"
Acct-Status-Type = Stop
Acct-Authentic = RADIUS
Acct-Session-Id = "1100030123581"
Framed-IP-Address = 192.168.0.118
NAS-IP-Address = 192.168.0.30
Event-Timestamp = "Apr 1 2000 20:58:26 BRT"
Acct-Session-Time = 4
Acct-Delay-Time = 1
Acct-Input-Octets = 0
Acct-Input-Packets = 0
Acct-Output-Octets = 0
Acct-Output-Packets = 0
Acct-Input-Gigawords = 0
Acct-Output-Gigawords = 0
Acct-Terminate-Cause = NAS-Error
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 2
modcall[preacct]: module "preprocess" returns noop for request 2
rlm_acct_unique: Hashing 'NAS-Port = 268439553,Client-IP-Address = 192.168.0.30,NAS-IP-Address = 192.168.0.30,Acct-Session-Id = "1100030123581",User-Name = "asoares"'
rlm_acct_unique: Acct-Unique-Session-ID = "eb49d1a90caa7493".
modcall[preacct]: module "acct_unique" returns ok for request 2
rlm_realm: No '@' in User-Name = "asoares", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[preacct]: module "suffix" returns noop for request 2
modcall[preacct]: module "files" returns noop for request 2
modcall: leaving group preacct (returns ok) for request 2
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 2
radius_xlat: '/usr/local/var/log/radius/radacct/192.168.0.30/detail-20070118'
rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.0.30/detail-20070118
modcall[accounting]: module "detail" returns ok for request 2
modcall[accounting]: module "unix" returns ok for request 2
radius_xlat: '/usr/local/var/log/radius/radutmp'
radius_xlat: 'asoares'
modcall[accounting]: module "radutmp" returns ok for request 2
modcall: leaving group accounting (returns ok) for request 2
Sending Accounting-Response of id 1 to 192.168.0.30 port 5001
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 2 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 45b00aa7
Waking up in 4 seconds...
client 127.0.0.1 {
secret = testing123
shortname = localhost
nastype = other
}
client 192.168.0.30 {
secret = MeuSegredo
shortname = SWRJO-01
nastype = other
}
# -*- text -*-
#
# Version $Id: dictionary,v 1.93.2.5.2.7 2006/11/26 19:29:19 aland Exp $
#
# DO NOT EDIT THE FILES IN THIS DIRECTORY
#
# The files in this directory are maintained and updated by
# the FreeRADIUS project. Newer releases of software may update
# or change these files.
#
# Use the main dictionary file (usually /etc/raddb/dictionary)
# for local system attributes and $INCLUDEs.
#
#
#
# This file contains dictionary translations for parsing
# requests and generating responses. All transactions are
# composed of Attribute/Value Pairs. The value of each attribute
# is specified as one of 4 data types. Valid data types are:
#
# text - printable, generally UTF-8 encoded (subset of 'string')
# string - 0-253 octets
# ipaddr - 4 octets in network byte order
# integer - 32 bit value in big endian order (high byte first)
# date - 32 bit value in big endian order - seconds since
# 00:00:00 GMT, Jan. 1, 1970
# ifid - 8 octets in network byte order
# ipv6addr - 16 octets in network byte order
# ipv6prefix - 18 octets in network byte order
#
# FreeRADIUS includes extended data types which are not defined
# in the RFC's. These data types are:
#
# abinary - Ascend's binary filter format.
# octets - raw octets, printed and input as hex strings.
# e.g.: 0x123456789abcdef
#
#
# Enumerated values are stored in the user file with dictionary
# VALUE translations for easy administration.
#
# Example:
#
# ATTRIBUTE VALUE
# --------------- -----
# Framed-Protocol = PPP
# 7 = 1 (integer encoding)
#
#
# Include compatibility dictionary for older users file. Move
# this directive to the end of this file if you want to see the
# old names in the logfiles, INSTEAD OF the new names.
#
$INCLUDE dictionary.compat
#
# Include the RFC dictionaries next.
#
# For a complete list of the standard attributes and values,
# see:
# http://www.iana.org/assignments/radius-types
#
$INCLUDE dictionary.rfc2865
$INCLUDE dictionary.rfc2866
$INCLUDE dictionary.rfc2867
$INCLUDE dictionary.rfc2868
$INCLUDE dictionary.rfc2869
$INCLUDE dictionary.rfc3162
$INCLUDE dictionary.rfc3576
$INCLUDE dictionary.rfc3580
#
# Include vendor dictionaries after the standard ones.
#
$INCLUDE dictionary.3com
#
# And finally the server internal attributes.
#
$INCLUDE dictionary.freeradius.internal
#
# Miscellaneous attributes defined in weird places that
# don't really belong anywhere else...
#
ATTRIBUTE Originating-Line-Info 94 string
# As defined in draft-sterman-aaa-sip-00.txt
ATTRIBUTE Digest-Response 206 string
ATTRIBUTE Digest-Attributes 207 octets # stupid format
#
# Integer Translations
#
VALUE Service-Type Voice 12
VALUE Service-Type Fax 13
VALUE Service-Type Modem-Relay 14
VALUE Service-Type IAPP-Register 15
VALUE Service-Type IAPP-AP-Check 16
VALUE Framed-Protocol GPRS-PDP-Context 7
VALUE NAS-Port-Type Wireless-CDMA2000 22
VALUE NAS-Port-Type Wireless-UMTS 23
VALUE NAS-Port-Type Wireless-1X-EV 24
VALUE NAS-Port-Type IAPP 25
VALUE Framed-Protocol PPTP 9
# -*- text -*-
#
# 3com SuperStack Firewall dictionary
# Bought from Sonicwall, apparently, from Enterprise number 8741.
#
# $Id: dictionary.3com,v 1.3.2.1.2.1 2005/11/30 22:17:18 aland Exp $
#
VENDOR 3com 43
#
# These attributes contain the access-level value.
#
BEGIN-VENDOR 3com
ATTRIBUTE 3Com-User-Access-Level 1 integer
VALUE 3Com-User-Access-Level 3Com-Visit 0
VALUE 3Com-User-Access-Level 3Com-Monitor 1
VALUE 3Com-User-Access-Level 3Com-Manager 2
VALUE 3Com-User-Access-Level 3Com-Administrator 3
END-VENDOR 3com
#
# THIS FILE IS DEPRECATED.
#
# You should NOT be using this file to configure the server.
# It is here ONLY for backwards compatibility.
#
# See 'clients.conf' for the new configuration.
#
#
# naslist This file contains a list of NASes (Network Access Servers,
# also known as terminal servers) which we know.
#
# Description of the fields:
#
# * The first field is a valid hostname or IP address
# for the client.
# * The second field (seperated by blanks or tabs) is the
# short name we use in the logfiles for this NAS.
# * The third field defines what type of device it is. Valid
# values are "cisco", "computone", "livingston", "max40xx",
# "multitech", "netserver", "pathras", "patton", "portslave",
# "tc", "usrhiper" or "other".
#
# This is used to find out how to detect double logins.
#
# NAS Name Short Name Type
#---------------- ---------- ----
#portmaster1.isp.com pm1.NY livingston
#portmaster2.isp.com pm1.LA livingston
localhost local portslave
192.168.0.30 SWRJO-01 other
prefix = /usr/local
exec_prefix = ${prefix}
sysconfdir = ${prefix}/etc
localstatedir = ${prefix}/var
sbindir = ${exec_prefix}/sbin
logdir = ${localstatedir}/log/radius
raddbdir = ${sysconfdir}/raddb
radacctdir = ${logdir}/radacct
confdir = ${raddbdir}
run_dir = ${localstatedir}/run/radiusd
log_file = ${logdir}/radius.log
libdir = ${exec_prefix}/lib
pidfile = ${run_dir}/radiusd.pid
checkrad = ${sbindir}/checkrad
max_request_time = 30
delete_blocked_requests = no
cleanup_delay = 5
max_requests = 1024
bind_address = *
port = 0
hostname_lookups = no
allow_core_dumps = no
regular_expressions = yes
extended_expressions = yes
log_stripped_names = no
log_auth = no
log_auth_badpass = no
log_auth_goodpass = no
usercollide = no
lower_user = no
lower_pass = no
nospace_user = no
nospace_pass = no
proxy_requests = no
$INCLUDE ${confdir}/clients.conf
security {
max_attributes = 200
reject_delay = 1
status_server = no
}
thread pool {
start_servers = 5
max_servers = 32
min_spare_servers = 3
max_spare_servers = 10
max_requests_per_server = 0
}
modules {
unix {
cache = no
cache_reload = 600
radwtmp = ${logdir}/radwtmp
}
realm suffix {
format = suffix
delimiter = "@"
ignore_default = no
ignore_null = no
}
realm realmpercent {
format = suffix
delimiter = "%"
ignore_default = no
ignore_null = no
}
checkval {
item-name = Calling-Station-Id
check-name = Calling-Station-Id
data-type = string
}
preprocess {
huntgroups = ${confdir}/huntgroups
hints = ${confdir}/hints
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
}
files {
usersfile = ${confdir}/users
acctusersfile = ${confdir}/acct_users
compat = no
}
detail {
detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
detailperm = 0600
}
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
radutmp {
filename = ${logdir}/radutmp
username = %{User-Name}
case_sensitive = yes
check_with_nas = yes
perm = 0600
callerid = "yes"
}
attr_filter {
attrsfile = ${confdir}/attrs
}
counter daily {
filename = ${raddbdir}/db.daily
key = User-Name
count-attribute = Acct-Session-Time
reset = daily
counter-name = Daily-Session-Time
check-name = Max-Daily-Session
allowed-servicetype = Framed-User
cache-size = 5000
}
always fail {
rcode = fail
}
always reject {
rcode = reject
}
always ok {
rcode = ok
simulcount = 0
mpp = no
}
expr {
}
digest {
}
exec {
wait = yes
input_pairs = request
}
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = request
output_pairs = reply
#packet_type = Access-Accept
}
}
instantiate {
exec
expr
}
authorize {
preprocess
suffix
files
}
authenticate {
unix
}
preacct {
preprocess
acct_unique
suffix
files
}
accounting {
detail
unix
radutmp
}
session {
radutmp
}
#
# Please read the documentation file ../doc/processing_users_file,
# or 'man 5 users' (after installing the server) for more information.
#
# This file contains authentication security and configuration
# information for each user. Accounting requests are NOT processed
# through this file. Instead, see 'acct_users', in this directory.
#
# The first field is the user's name and can be up to
# 253 characters in length. This is followed (on the same line) with
# the list of authentication requirements for that user. This can
# include password, comm server name, comm server port number, protocol
# type (perhaps set by the "hints" file), and huntgroup name (set by
# the "huntgroups" file).
#
# If you are not sure why a particular reply is being sent by the
# server, then run the server in debugging mode (radiusd -X), and
# you will see which entries in this file are matched.
#
# When an authentication request is received from the comm server,
# these values are tested. Only the first match is used unless the
# "Fall-Through" variable is set to "Yes".
#
# A special user named "DEFAULT" matches on all usernames.
# You can have several DEFAULT entries. All entries are processed
# in the order they appear in this file. The first entry that
# matches the login-request will stop processing unless you use
# the Fall-Through variable.
#
# If you use the database support to turn this file into a .db or .dbm
# file, the DEFAULT entries _have_ to be at the end of this file and
# you can't have multiple entries for one username.
#
# You don't need to specify a password if you set Auth-Type += System
# on the list of authentication requirements. The RADIUS server
# will then check the system password file.
#
# Indented (with the tab character) lines following the first
# line indicate the configuration values to be passed back to
# the comm server to allow the initiation of a user session.
# This can include things like the PPP configuration values
# or the host to log the user onto.
#
# You can include another `users' file with `$INCLUDE users.other'
#
#
# For a list of RADIUS attributes, and links to their definitions,
# see:
#
# http://www.freeradius.org/rfc/attributes.html
#
#
# Deny access for a specific user. Note that this entry MUST
# be before any other 'Auth-Type' attribute which results in the user
# being authenticated.
#
# Note that there is NO 'Fall-Through' attribute, so the user will not
# be given any additional resources.
#
#lameuser Auth-Type := Reject
# Reply-Message = "Your account has been disabled."
#
# Deny access for a group of users.
#
# Note that there is NO 'Fall-Through' attribute, so the user will not
# be given any additional resources.
#
#DEFAULT Group == "disabled", Auth-Type := Reject
# Reply-Message = "Your account has been disabled."
#
#
# This is a complete entry for "steve". Note that there is no Fall-Through
# entry so that no DEFAULT entry will be used, and the user will NOT
# get any attributes in addition to the ones listed here.
#
#steve Auth-Type := Local, User-Password == "testing"
# Service-Type = Framed-User,
# Framed-Protocol = PPP,
# Framed-IP-Address = 172.16.3.33,
# Framed-IP-Netmask = 255.255.255.0,
# Framed-Routing = Broadcast-Listen,
# Framed-Filter-Id = "std.ppp",
# Framed-MTU = 1500,
# Framed-Compression = Van-Jacobsen-TCP-IP
#
# This is an entry for a user with a space in their name.
# Note the double quotes surrounding the name.
#
#"John Doe" Auth-Type := Local, User-Password == "hello"
# Reply-Message = "Hello, %u"
#
# Dial user back and telnet to the default host for that port
#
#Deg Auth-Type := Local, User-Password == "ge55ged"
# Service-Type = Callback-Login-User,
# Login-IP-Host = 0.0.0.0,
# Callback-Number = "9,5551212",
# Login-Service = Telnet,
# Login-TCP-Port = Telnet
#
# Another complete entry. After the user "dialbk" has logged in, the
# connection will be broken and the user will be dialed back after which
# he will get a connection to the host "timeshare1".
#
#dialbk Auth-Type := Local, User-Password == "callme"
# Service-Type = Callback-Login-User,
# Login-IP-Host = timeshare1,
# Login-Service = PortMaster,
# Callback-Number = "9,1-800-555-1212"
#
# user "swilson" will only get a static IP number if he logs in with
# a framed protocol on a terminal server in Alphen (see the huntgroups file).
#
# Note that by setting "Fall-Through", other attributes will be added from
# the following DEFAULT entries
#
#swilson Service-Type == Framed-User, Huntgroup-Name == "alphen"
# Framed-IP-Address = 192.168.1.65,
# Fall-Through = Yes
#
# If the user logs in as 'username.shell', then authenticate them
# against the system database, give them shell access, and stop processing
# the rest of the file.
#
#DEFAULT Suffix == ".shell", Auth-Type := System
# Service-Type = Login-User,
# Login-Service = Telnet,
# Login-IP-Host = your.shell.machine
#
# The rest of this file contains the several DEFAULT entries.
# DEFAULT entries match with all login names.
# Note that DEFAULT entries can also Fall-Through (see first entry).
# A name-value pair from a DEFAULT entry will _NEVER_ override
# an already existing name-value pair.
#
#
# First setup all accounts to be checked against the UNIX /etc/passwd.
# (Unless a password was already given earlier in this file).
#
DEFAULT Auth-Type = System
Fall-Through = 1
#
# Set up different IP address pools for the terminal servers.
# Note that the "+" behind the IP address means that this is the "base"
# IP address. The Port-Id (S0, S1 etc) will be added to it.
#
#DEFAULT Service-Type == Framed-User, Huntgroup-Name == "alphen"
# Framed-IP-Address = 192.168.1.32+,
# Fall-Through = Yes
#DEFAULT Service-Type == Framed-User, Huntgroup-Name == "delft"
# Framed-IP-Address = 192.168.2.32+,
# Fall-Through = Yes
#
# Defaults for all framed connections.
#
DEFAULT Service-Type == Framed-User
Framed-IP-Address = 255.255.255.254,
Framed-MTU = 576,
Service-Type = Framed-User,
Fall-Through = Yes
#
# Default for PPP: dynamic IP address, PPP mode, VJ-compression.
# NOTE: we do not use Hint = "PPP", since PPP might also be auto-detected
# by the terminal server in which case there may not be a "P" suffix.
# The terminal server sends "Framed-Protocol = PPP" for auto PPP.
#
DEFAULT Framed-Protocol == PPP
Framed-Protocol = PPP,
Framed-Compression = Van-Jacobson-TCP-IP
#
# Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
#
DEFAULT Hint == "CSLIP"
Framed-Protocol = SLIP,
Framed-Compression = Van-Jacobson-TCP-IP
#
# Default for SLIP: dynamic IP address, SLIP mode.
#
DEFAULT Hint == "SLIP"
Framed-Protocol = SLIP
#
# Last default: rlogin to our main server.
#
#DEFAULT
# Service-Type = Login-User,
# Login-Service = Rlogin,
# Login-IP-Host = shellbox.ispdomain.com
# #
# # Last default: shell on the local terminal server.
# #
# DEFAULT
# Service-Type = Shell-User
# On no match, the user is denied access.
asoares Auth-Type := System, 3Com-User-Access-Level = 3Com-Administrator
visita Auth-Type := System, 3Com-User-Access-Level = 3Com-Visit
This archive was generated by a fusion of
Pipermail (Mailman edition) and
MHonArc.