auth: No authenticate method (Auth-Type) configuration found for therequest: Rejecting the user

[tnt at kalik.co.yu]

You can ask a hundred times in different ways. Answer will still be the
same:

 WARNING: Unprintable characters in the password. ? Double-check the
shared secret on the server and the NAS!

Ivan Kalik
Kalik Informatika ISP


Dana 11/7/2007, "E A" <eabdelghani at yahoo.fr> piše:

>
>
>Hello
>I hav one authentificate problem between my Freeradius and NAT(for VOIP)
>what means that i have : No authenticate method (Auth-Type)
>so here is my debug : radiusd -X
>
>rad_recv: Access-Request packet from host 192.168.100.238:1912, id=2, length=684
>        User-Name = "192.168.100.180"
>        User-Password = "\371\323\025["
>        NAS-IP-Address = 192.168.100.238
>        NAS-Port-Type = Async
>        Service-Type = Login-User
>        Called-Station-Id = "907100"
>        Calling-Station-Id = "4002"
>        Cisco-AVPair = "xpgk-request-type=number"
>        Acct-Session-Id = "47306f08-1-b56089b1"
>        h323-conf-id = "h323-conf-id=02B21F32 1DEB1BAB 26450001 A8045DEC"
>        Cisco-AVPair = "h323-call-id=02B21F32 1DEB1BAB 26440001 A8045DEC"
>        h323-gw-id = "h323-gw-id=192.168.100.180"
>        Cisco-AVPair = "h323-gw-address=192.168.100.180"
>        Cisco-AVPair = "h323-incoming-local-address=192.168.100.238"
>        h323-remote-address = "h323-remote-address=194.6.239.4"
>        Cisco-AVPair = "h323-remote-id=194.6.239.4"
>        Cisco-AVPair = "xpgk-h323-id=4FXS-045dec"
>        Cisco-AVPair = "xpgk-src-number-in=4002"
>        Cisco-AVPair = "xpgk-src-number-out=4002"
>        Cisco-AVPair = "xpgk-dst-number-in=907100"
>        Cisco-AVPair = "xpgk-dst-number-out=907100"
>        h323-setup-time = "h323-setup-time=11:05:05.000 CEST Wed Jul 11 2007"
>        Cisco-AVPair = "xpgk-route-retries=1"
>  Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 1
>  modcall[authorize]: module "preprocess" returns ok for request 1
>  modcall[authorize]: module "chap" returns noop for request 1
>  modcall[authorize]: module "mschap" returns noop for request 1
>    rlm_realm: No '@' in User-Name = "192.168.100.180", looking up realm NULL
>    rlm_realm: No such realm "NULL"
>  modcall[authorize]: module "suffix" returns noop for request 1
>  rlm_eap: No EAP-Message, not doing EAP
>  modcall[authorize]: module "eap" returns noop for request 1
>radius_xlat:  '192.168.100.180'
>rlm_sql (sql): sql_set_user escaped user --> '192.168.100.180'
>radius_xlat:  'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '192.168.100.180' ORDER BY id'
>rlm_sql (sql): Reserving sql socket id: 3
>query:  SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '192.168.100.180' ORDER BY id
>radius_xlat:  'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheckAttribute,radgroupcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE usergroup.Username = '192.168.100.180' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
>query:  SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE usergroup.Username = '192.168.100.180' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id
>radius_xlat:  'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '192.168.100.180' ORDER BY id'
>query:  SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '192.168.100.180' ORDER BY id
>radius_xlat:  'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreplyAttribute,radgroupreply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE usergroup.Username = '192.168.100.180' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
>query:  SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE usergroup.Username = '192.168.100.180' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id
>rlm_sql (sql): Released sql socket id: 3
>rlm_sql (sql): No matching entry in the database for request from user [192.168.100.180]
>  modcall[authorize]: module "sql" returns notfound for request 1
>modcall: leaving group authorize (returns ok) for request 1
>auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
>auth: Failed to validate the user.
>  WARNING: Unprintable characters in the password. ?  Double-check the shared secret on the server and the NAS!
>Delaying request 1 for 1 seconds
>Finished request 1
>Going to the next request
>--- Walking the entire request list ---
>Waking up in 1 seconds...
>--- Walking the entire request list ---
>Waking up in 1 seconds...
>--- Walking the entire request list ---
>Sending Access-Reject of id 2 to 192.168.100.238 port 1912
>Waking up in 4 seconds...
>--- Walking the entire request list ---
>Cleaning up request 1 ID 2 with timestamp 46949d41
>Nothing to do.  Sleeping until we see a request.
>
>
>any help?
>best regards!!!
>
>
>---------------------------------
> Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail
>