Attribute "User-Password" is required for authentication
Cody Jarrett
cody.jarrett at itfreedom.com
Mon Jun 18 23:31:55 CEST 2007
Oh, I had "Default auth-type := pam" in users. I removed that line and
get a much longer debug output when I try to connect with the xp machine
to the wireless. radtest fails with this message "auth: No authenticate
method (Auth-Type) configuration found for the request: Rejecting the
user. I have a feeling something is wrong with my eap.conf, I have debug
below, any input would be appreciated.
eap.conf
eap {
default_eap_type = peap
timer_expire = 60
ignore_unknown_eap_types = no
md5 {
}
gtc {
auth_type = PAP
}
tls {
private_key_password = testing123
private_key_file = ${dbdir}/certs/pem/server.pem
certificate_file = ${dbdir}/certs/pem/server.pem
CA_file = /etc/raddb/certs/pem/root.pem
dh_file = ${raddbdir}/certs/dh
random_file = /dev/urandom
}
ttls {
default_eap_type = md5
}
peap {
default_eap_type = mschapv2
proxy_tunneled_request_as_eap = no
}
mschapv2 {
}
}
users:
DEFAULT Service-Type == Framed-User
Framed-Protocol == PPP,
Framed-Protocol = PPP,
Framed-Compression = Van-Jacobson-TCP-IP
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=0, length=185
Message-Authenticator = 0x381988b4c12ff0f1e3fa2e7e018b8ae5
Service-Type = Framed-User
User-Name = "cjarrett"
Framed-MTU = 1488
Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
Calling-Station-Id = "00-0E-35-FF-2A-82"
NAS-Identifier = "AP11G"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x0200000d01636a617272657474
NAS-IP-Address = 10.1.22.10
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 0 length 13
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 176
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 0 to 10.1.22.10 port 2626
EAP-Message = 0x010100061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x36ba98c6e90e487eb0cfe88fcb5d879a
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=1, length=270
Message-Authenticator = 0x43e1cd5ba6e967f5717089de44e05384
Service-Type = Framed-User
User-Name = "cjarrett"
Framed-MTU = 1488
State = 0x36ba98c6e90e487eb0cfe88fcb5d879a
Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
Calling-Station-Id = "00-0E-35-FF-2A-82"
NAS-Identifier = "AP11G"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x0201005019800000004616030100410100003d03014676f85e6be1d378fdbdbe6213a94362bd4453b8699af3896b955781d14034be00001600040005000a000900640062000300060013001200630100
NAS-IP-Address = 10.1.22.10
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 1 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry DEFAULT at line 176
modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 04f2], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept:error in SSLv3 read client certificate A
rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group authenticate (returns handled) for request 1
Sending Access-Challenge of id 1 to 10.1.22.10 port 2626
EAP-Message =
0x0102040a19c00000054f160301004a0200004603014676f843d803483c15d36e93f5903c5cc8e52cbb90fc704442d65da40223da252005d814e7158dcfd27bf3ca5c85ae01dd827440aee3ab5505601792296939c1e400040016030104f20b0004ee0004eb000237308202333082019ca003020102020108300d06092a864886f70d01010505003043310b3009060355040613025553310e300c060355040813055465786173310f300d0603550407130641757374696e31133011060355040a130a49542046726565646f6d301e170d3037303631383135303533315a170d3038303631373135303533315a3063310b3009060355040613025553310e
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x8bcf453bc58cbc621f2c93bffa3c802435d0ef96af8f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xdb7e976ee5b705e695f599c38b37c3ff
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=2, length=196
Message-Authenticator = 0xfe7be571e4388b7f6070941972326855
Service-Type = Framed-User
User-Name = "cjarrett"
Framed-MTU = 1488
State = 0xdb7e976ee5b705e695f599c38b37c3ff
Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
Calling-Station-Id = "00-0E-35-FF-2A-82"
NAS-Identifier = "AP11G"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020200061900
NAS-IP-Address = 10.1.22.10
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry DEFAULT at line 176
modcall[authorize]: module "files" returns ok for request 2
modcall: leaving group authorize (returns updated) for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 2
modcall: leaving group authenticate (returns handled) for request 2
Sending Access-Challenge of id 2 to 10.1.22.10 port 2626
EAP-Message =
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
EAP-Message =
0x730816c95730f262d998622fef7ab67085b11171fcf91eedc0c722978688b4d95cc733f75cc8129c379c68664c1d4b25f86f4bfe077e3f816874b5164236b79ad98f7f21bff654afa0f389c860452416030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa59e16e46b5a6ec02559580464dcdfc7
Finished request 2
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=3, length=382
Message-Authenticator = 0x4fcb37f77d06f6b896b44d378446425a
Service-Type = Framed-User
User-Name = "cjarrett"
Framed-MTU = 1488
State = 0xa59e16e46b5a6ec02559580464dcdfc7
Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
Calling-Station-Id = "00-0E-35-FF-2A-82"
NAS-Identifier = "AP11G"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x020300c01980000000b61603010086100000820080035f438a01efd8ab7c7a294a61aa7e875d7f06a8b634a2a73a3ec20b5069ec4dc0137747833e1252a070c6a3ce81917fd9dd1b712aaccd042e95790c91f15f1dd2408872453cb91d824630458d5b1546a2c60bcaee1207ddc57472ffc6afe456a82c452e1b3efc2f786ed598851a0a86be44c9dd31ba87d5c21cba7ef7e30d3a1403010001011603010020b3d94931dfd1413c9c4cb7248eaa9bfa185de0ce13cda40c4b717e7ac0271ba8
NAS-IP-Address = 10.1.22.10
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
modcall[authorize]: module "chap" returns noop for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 3 length 192
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched entry DEFAULT at line 176
modcall[authorize]: module "files" returns ok for request 3
modcall: leaving group authorize (returns updated) for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
TLS_accept: SSLv3 read client key exchange A
rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 read finished A
rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
TLS_accept: SSLv3 write change cipher spec A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 write finished A
TLS_accept: SSLv3 flush data
(other): SSL negotiation finished successfully
rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
SSL Connection Established
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 3
modcall: leaving group authenticate (returns handled) for request 3
Sending Access-Challenge of id 3 to 10.1.22.10 port 2626
EAP-Message =
0x0104003119001403010001011603010020935e4cc86eaaa1072ebd4e4c8e29ec031c939675d0c8c4d896dd671395d3fa1f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd79c6820132ebef7cf1548ab25a93afa
Finished request 3
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=4, length=196
Message-Authenticator = 0x4064e5721fc1c83e994ee45dc66e4fb4
Service-Type = Framed-User
User-Name = "cjarrett"
Framed-MTU = 1488
State = 0xd79c6820132ebef7cf1548ab25a93afa
Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
Calling-Station-Id = "00-0E-35-FF-2A-82"
NAS-Identifier = "AP11G"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020400061900
NAS-IP-Address = 10.1.22.10
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
modcall[authorize]: module "chap" returns noop for request 4
modcall[authorize]: module "mschap" returns noop for request 4
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 4 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched entry DEFAULT at line 176
modcall[authorize]: module "files" returns ok for request 4
modcall: leaving group authorize (returns updated) for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake is finished
eaptls_verify returned 3
eaptls_process returned 3
rlm_eap_peap: EAPTLS_SUCCESS
modcall[authenticate]: module "eap" returns handled for request 4
modcall: leaving group authenticate (returns handled) for request 4
Sending Access-Challenge of id 4 to 10.1.22.10 port 2626
EAP-Message =
0x0105002019001703010015182fff1e23fe4e9d74e4dd55b6a10b80d9cb1b6f3e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x890db137000563152da88540de2781e1
Finished request 4
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=5, length=226
Message-Authenticator = 0x7ad74000bf14f349569c0ccfb1540c0d
Service-Type = Framed-User
User-Name = "cjarrett"
Framed-MTU = 1488
State = 0x890db137000563152da88540de2781e1
Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
Calling-Station-Id = "00-0E-35-FF-2A-82"
NAS-Identifier = "AP11G"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x0205002419001703010019125b45ef09a64c9d64c8b7704291bcf4e8b811339b0138b716
NAS-IP-Address = 10.1.22.10
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "chap" returns noop for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 5 length 36
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched entry DEFAULT at line 176
modcall[authorize]: module "files" returns ok for request 5
modcall: leaving group authorize (returns updated) for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Identity - cjarrett
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message = 0x0205000d01636a617272657474
PEAP: Got tunneled identity of cjarrett
PEAP: Setting default EAP type for tunneled EAP session.
PEAP: Setting User-Name to cjarrett
PEAP: Sending tunneled request
EAP-Message = 0x0205000d01636a617272657474
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "cjarrett"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "chap" returns noop for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 5 length 13
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
modcall[authorize]: module "files" returns notfound for request 5
modcall: leaving group authorize (returns updated) for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: EAP Identity
rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 5
modcall: leaving group authenticate (returns handled) for request 5
PEAP: Got tunneled reply RADIUS code 11
EAP-Message =
0x010600221a0106001d1058699d07aa7a08377307f1c5ed250f94636a617272657474
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x6a6983e73566293debc28f9785f4ba2c
PEAP: Processing from tunneled session code 0x9c06760 11
EAP-Message =
0x010600221a0106001d1058699d07aa7a08377307f1c5ed250f94636a617272657474
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x6a6983e73566293debc28f9785f4ba2c
PEAP: Got tunneled Access-Challenge
modcall[authenticate]: module "eap" returns handled for request 5
modcall: leaving group authenticate (returns handled) for request 5
Sending Access-Challenge of id 5 to 10.1.22.10 port 2626
EAP-Message =
0x010600391900170301002ef2c5b8b197e6c26f51f804007aeffa9201509b57c8efb035180baa21bb94725c31867049409c85079be2e3428678
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb9a3bd04514836a4cba31c175e9c77e6
Finished request 5
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=6, length=280
Message-Authenticator = 0xc08fd8e4919b60e5bd7e5470be52c475
Service-Type = Framed-User
User-Name = "cjarrett"
Framed-MTU = 1488
State = 0xb9a3bd04514836a4cba31c175e9c77e6
Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
Calling-Station-Id = "00-0E-35-FF-2A-82"
NAS-Identifier = "AP11G"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x0206005a1900170301004f9d20dcfecf2d949b98e83b0ef8ed9db381e1102982367126820039e03f3c11fb6d43998ca6a01e65a19e9ea7d823bd743bd8eb1d732d8dae19c82f39c08ad02e9d63fe13d0c25900ac075cdc3ada61
NAS-IP-Address = 10.1.22.10
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 6 length 90
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched entry DEFAULT at line 176
modcall[authorize]: module "files" returns ok for request 6
modcall: leaving group authorize (returns updated) for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: EAP type mschapv2
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message =
0x020600431a0206003e31177b8b92c88cf3358dc9dce769bb3fe80000000000000000c4134ec0576a1f17704daad6e18e3a3b5f08dec2a3b5f1ba00636a617272657474
PEAP: Setting User-Name to cjarrett
PEAP: Adding old state with 6a 69
PEAP: Sending tunneled request
EAP-Message =
0x020600431a0206003e31177b8b92c88cf3358dc9dce769bb3fe80000000000000000c4134ec0576a1f17704daad6e18e3a3b5f08dec2a3b5f1ba00636a617272657474
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "cjarrett"
State = 0x6a6983e73566293debc28f9785f4ba2c
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 6 length 67
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
modcall[authorize]: module "files" returns notfound for request 6
modcall: leaving group authorize (returns updated) for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/mschapv2
rlm_eap: processing type mschapv2
Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 6
rlm_mschap: No User-Password configured. Cannot create LM-Password.
rlm_mschap: No User-Password configured. Cannot create NT-Password.
rlm_mschap: Told to do MS-CHAPv2 for cjarrett with NT-Password
rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication.
rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
modcall[authenticate]: module "mschap" returns reject for request 6
modcall: leaving group MS-CHAP (returns reject) for request 6
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns reject for request 6
modcall: leaving group authenticate (returns reject) for request 6
auth: Failed to validate the user.
PEAP: Got tunneled reply RADIUS code 3
MS-CHAP-Error = "\006E=691 R=1"
EAP-Message = 0x04060004
Message-Authenticator = 0x00000000000000000000000000000000
PEAP: Processing from tunneled session code 0x9c06198 3
MS-CHAP-Error = "\006E=691 R=1"
EAP-Message = 0x04060004
Message-Authenticator = 0x00000000000000000000000000000000
PEAP: Tunneled authentication was rejected.
rlm_eap_peap: FAILURE
modcall[authenticate]: module "eap" returns handled for request 6
modcall: leaving group authenticate (returns handled) for request 6
Sending Access-Challenge of id 6 to 10.1.22.10 port 2626
EAP-Message =
0x010700261900170301001bf1f9bd115db78bcad8de732871f5282e1a0754b687ddc300965f0f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x56c5dd00772486e492f840877441be62
Finished request 6
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=7, length=228
Message-Authenticator = 0x55ab371942148ebc1eed6c3b87d626de
Service-Type = Framed-User
User-Name = "cjarrett"
Framed-MTU = 1488
State = 0x56c5dd00772486e492f840877441be62
Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
Calling-Station-Id = "00-0E-35-FF-2A-82"
NAS-Identifier = "AP11G"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x020700261900170301001b4fbf51c05fb105bb02792f87fba4e8cd787ff2beafe7d334716e53
NAS-IP-Address = 10.1.22.10
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
modcall[authorize]: module "preprocess" returns ok for request 7
modcall[authorize]: module "chap" returns noop for request 7
modcall[authorize]: module "mschap" returns noop for request 7
rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 7 length 38
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched entry DEFAULT at line 176
modcall[authorize]: module "files" returns ok for request 7
modcall: leaving group authorize (returns updated) for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Received EAP-TLV response.
rlm_eap_peap: Tunneled data is valid.
rlm_eap_peap: Had sent TLV failure. User was rejcted rejected
earlier in this session.
rlm_eap: Handler failed in EAP/peap
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 7
modcall: leaving group authenticate (returns invalid) for request 7
auth: Failed to validate the user.
Delaying request 7 for 1 seconds
Finished request 7
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.1.22.10:2626, id=7, length=228
Sending Access-Reject of id 7 to 10.1.22.10 port 2626
EAP-Message = 0x04070004
Message-Authenticator = 0x00000000000000000000000000000000
--- Walking the entire request list ---
Waking up in 2 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 4676f842
Waking up in 1 seconds...
tnt at kalik.co.yu wrote:
> You are forcing Auth-Type PAM and doing EAP. Where is Auth-Type coming
> from? One of the DEFAULT entries? Don't set Auth-Type! Let the server
> swich to one that's needed.
>
> Ivan Kalik
> Kalik Informatika ISP
>
>
> Dana 18/6/2007, "Cody Jarrett" <cody.jarrett at itfreedom.com> piše:
>
>> Sorry, 10.1.22.10 is the ip of my 3com.
>>
>> rad_recv: Access-Request packet from host 10.1.22.10:2458, id=0, length=185
>> Message-Authenticator = 0xb0ba1aec817dfd6ab3fc3b0e49fb1125
>> Service-Type = Framed-User
>> User-Name = "cjarrett"
>> Framed-MTU = 1488
>> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
>> Calling-Station-Id = "00-0E-35-FF-2A-82"
>> NAS-Identifier = "AP11G"
>> NAS-Port-Type = Wireless-802.11
>> Connect-Info = "CONNECT 54Mbps 802.11g"
>> EAP-Message = 0x0200000d01636a617272657474
>> NAS-IP-Address = 10.1.22.10
>> NAS-Port = 2
>> NAS-Port-Id = "STA port # 2"
>> Processing the authorize section of radiusd.conf
>> modcall: entering group authorize for request 0
>> modcall[authorize]: module "preprocess" returns ok for request 0
>> modcall[authorize]: module "chap" returns noop for request 0
>> modcall[authorize]: module "mschap" returns noop for request 0
>> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
>> rlm_realm: No such realm "NULL"
>> modcall[authorize]: module "suffix" returns noop for request 0
>> rlm_eap: EAP packet type response id 0 length 13
>> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>> modcall[authorize]: module "eap" returns updated for request 0
>> users: Matched entry DEFAULT at line 153
>> users: Matched entry DEFAULT at line 177
>> modcall[authorize]: module "files" returns ok for request 0
>> modcall: leaving group authorize (returns updated) for request 0
>> rad_check_password: Found Auth-Type pam
>> auth: type "PAM"
>> Processing the authenticate section of radiusd.conf
>> modcall: entering group authenticate for request 0
>> rlm_pam: Attribute "User-Password" is required for authentication.
>> modcall[authenticate]: module "pam" returns invalid for request 0
>> modcall: leaving group authenticate (returns invalid) for request 0
>> auth: Failed to validate the user.
>> Delaying request 0 for 1 seconds
>> Finished request 0
>> Going to the next request
>> --- Walking the entire request list ---
>> Waking up in 1 seconds...
>> --- Walking the entire request list ---
>> Waking up in 1 seconds...
>> --- Walking the entire request list ---
>> Sending Access-Reject of id 0 to 10.1.22.10 port 2458
>> Waking up in 4 seconds...
>>
>>
>>
>> Kevin Bonner wrote:
>>> On Monday 18 June 2007 16:31:37 Cody Jarrett wrote:
>>>> I found a few topics on this issue but nothing quite informative enough.
>>>> I'm trying to get freeradius auth working with pam and peap. When I test
>>>> my config with radtest, I get Access-accept. When I use a windows XP
>>>> supplicant with a 3com access point, I get:
>>>>
>>>> rlm_pam: Attribute "User-Password" is required for authentication.
>>>> modcall[authenticate]: module "pam" returns invalid for request 4
>>>> modcall: leaving group authenticate (returns invalid) for request 4
>>>> auth: Failed to validate the user.
>>>>
>>>> Is the 3com not sending User-Password attributes in the packets, or is
>>>> something else wrong?
>>> Run FreeRADIUS in debug mode (radiusd -X) to verify. We cannot guess what
>>> your NAS/client is sending.
>>>
>>> -Kevin
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> -
>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
>>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
More information about the Freeradius-Users
mailing list