Date: Wed, 28 Feb 2007 19:35:48 +0000
From: Phil Mayers <p.mayers@imperial.ac.uk>
Subject: Re: Logging based on port request came in on
To: FreeRadius users mailing list
<freeradius-users@lists.freeradius.org>
Message-ID: <45E5D994.2070801@imperial.ac.uk>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Walt Reynolds wrote:
Hello,
I have freeradius 1.1.2 set up to listen on both ports 1812/1813 and
1645/1646. This is simply to separate user and admin login. What I
would like to do is to add logging based on the port. I could add
%{NAS-Port-Type} to the Detail such as:
detailfile = ${radacctdir}/%{NAS-Port-Type}/auth-detail-%Y%m%d
The problem with doing this as it uses the string "Wireless-802.11"
or "Virtual". I would instead like to use the port the request came
in on
NAS-Port-Type is, as you've discovered, the port type of the session
being authenticated/accounted
(1812 or 1645) or even modify that string value. I tried to add the
string %(request:Packet-Dst-Port) (from the
dictionary.freeradius.internal) in the detailfile, but comes back blank.
Since it is in this dictionary, is there something I would have to do
You'll need a sufficiently recent version of the server for that to
work, and IIRC the "preprocess" module needs to be run (you should
always run it)
Well, I am using 1.1..2 version of Freeradius. I also am preprocessing,
though I am not sure that would be needed here. As this is a variable
defined in the dictionary file, I was under the impression that I could
use it.
Either way, here is the section from the config:
preprocess {
huntgroups = ${confdir}/huntgroups
hints = ${confdir}/hints
with_cisco_vsa_hack = yes
}
I had added this to the hints files as well, but did not seem do anything:
Am I misreading this in some way. I assume that internally
freeradius knows what port the request came in on.
What version are you running?
1.1.2