problem in autehtication with EAP-MD5

[tnt at kalik.co.yu]

Well, now you dont have any IP address in your accept packet. Not a
problem if you are doing DHCP. Otherwise you need to return IP address,
netmask, MTU, Service-Type, DNS servers etc.

Leave that Framed-User DEFAULT entry alone - it should be there. You need
to add stuff to your user config:

testuser   Cleartext-Password:=yourpassword
                Framed-IP-Address=1.2.3.4
                Framed-MTU=yourMTU
                Framed-IP-Netmask=255.255.255.255
etc.

Ivan Kalik
Kalik Informatika ISP


Dana 30/5/2007, "shantanu choudhary" <shantanu_843 at yahoo.co.in> piše:

--- snip ---
>Sending Access-Accept of id 2 to 192.168.2.182 port 1028
>        EAP-Message = 0x03020004
>        Message-Authenticator = 0x00000000000000000000000000000000
>        User-Name = "testuser"
>Finished request 1
>Going to the next request
>Waking up in 6 seconds...
>--- Walking the entire request list ---
>Cleaning up request 0 ID 1 with timestamp 465d506e
>Cleaning up request 1 ID 2 with timestamp 465d506e
>Nothing to do.  Sleeping until we see a request.
>
>it is sending ACCESS ACCEPT but no access reject or failure!!!!
>and when i try to check AP statistics from server it is showing an entry for AUTHENTICATION FAILURE!!!!!!!
>
>sorry for disturbing u again n again but can u help me out????
>please!!
>shantanu
>