PAM_RADIUS_AUTH

Sobanbabu Bakthavathsalu Sobanbabu_B at infosys.com
Fri Nov 2 12:59:15 CET 2007


Is this compatible with Solaris 10

First time I tried with IP address only, and got the following error.
Oct 25 19:58:20 ada-delegate1 login: [ID 801593 auth.error] pam_radius_auth: Failed looking up IP address for RADIUS server 10.213.31.186 (errcode=12)
Oct 25 19:58:20 ada-delegate1 login: [ID 801593 auth.error] pam_radius_auth: Failed looking up IP address for RADIUS server 10.213.69.133 (errcode=12)
It was trying to resolve the IP address for an address again. Later I made a host entry and tried and the changed the config to name again. And getting the same error.

Regards
Soban

________________________________________
From: Sobanbabu Bakthavathsalu
Sent: 31 October 2007 10:46
To: FreeRadius users mailing list
Subject: RE: PAM_RADIUS_AUTH

Hi Alan,

First time I tried with IP address only, and got the following error.

Oct 25 19:58:20 ada-delegate1 login: [ID 801593 auth.error] pam_radius_auth: Failed looking up IP address for RADIUS server 10.213.31.186 (errcode=12)
Oct 25 19:58:20 ada-delegate1 login: [ID 801593 auth.error] pam_radius_auth: Failed looking up IP address for RADIUS server 10.213.69.133 (errcode=12)

It was trying to resolve the IP address for an address again. Later I made a host entry and tried and the changed the config to name again. And getting the same error.

Regards
Soban


________________________________________
From: freeradius-users-bounces at lists.freeradius.org [freeradius-users-bounces at lists.freeradius.org] On Behalf Of Alan DeKok [aland at deployingradius.com]
Sent: 30 October 2007 17:28
To: FreeRadius users mailing list
Subject: Re: PAM_RADIUS_AUTH

Sobanbabu Bakthavathsalu wrote:
> Thank you for the response. There is no firewall in between the RADIUS server and Solaris server (RADIUS client), only an Cisco router with standard ACL. I have verified the ACL matches counter and found that the request from the clinet itself is not reachign the router.
> Is that host entries in /etc/hosts file wont work for this, do I need a DNS server for RADIUS server name authentication to work with pam_radius_auth.

  No.  You *can* enter just an IP address...

  Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***




More information about the Freeradius-Users mailing list