WPA HOWTO

OLIVER Patrice patrice.oliver at ch-beaune.fr
Wed Nov 21 08:29:24 CET 2007


If it don't work, you have to do the changes manually. I did it, it's not a long job to do.

Cordialement,

----------------------------------------
Patrice OLIVER
Chef du Projet Ville Hôpital
Responsable Réseaux & Sécurité
----------------------------------------
HOSPICES CIVILS DE BEAUNE
Service Informatique
BP 104
21203 BEAUNE CEDEX

Tél. 33 3 80 24 44 09
Fax  33 3 80 24 45 90
----------------------------------------


-----Original Message-----
From: build <buildy at gmail.com>
To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
Date: Wed, 21 Nov 2007 18:10:22 +1100
Subject: Re: WPA HOWTO

> G'day Oliver,
> Thank you for that, no wonder :-(
> However the build looks scary so I:
> :/# patch -pl < freeradius-openssl.patch
> patch: **** strip count l is not a number
> :/#
> 
> Is this easily fixed?
> 
> Thanks in anticipation,
> build
> 
> 
> On 21/11/2007, OLIVER Patrice <patrice.oliver at ch-beaune.fr> wrote:
> > Hi,
> >
> > I don't recommend you to use Debian Freeradius Package. It has been built without eap support.
> > You have to rebuild from source.
> >
> > Here is a good link here :
> > http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html
> >
> > Regards.
> >
> > ----------------------------------------
> > Patrice OLIVER
> > Chef du Projet Ville Hôpital
> > Responsable Réseaux & Sécurité
> > ----------------------------------------
> > HOSPICES CIVILS DE BEAUNE
> > Service Informatique
> > BP 104
> > 21203 BEAUNE CEDEX
> >
> > Tél. 33 3 80 24 44 09
> > Fax  33 3 80 24 45 90
> > ----------------------------------------
> >
> >
> > -----Original Message-----
> > From: build <buildy at gmail.com>
> > To: "FreeRADIUS LIST" <freeradius-users at lists.freeradius.org>
> > Date: Wed, 21 Nov 2007 17:22:58 +1100
> > Subject: WPA HOWTO
> >
> > > G'day All,
> > > Using Debian etch. I've started again with the WPA HOWTO at
> > > http://wiki.freeradius.org/WPA_HOWTO
> > >
> > > It's a bit confusing with the eap.conf file separate to the
> > > radiusd.conf but I thought I had got it right. I was wrong.
> > >
> > > :/# freeradius -X -A
> > > Starting - reading configuration files ...
> > > <snip>
> > > rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot open
> > > shared object file: No such file or directory
> > > radiusd.conf[10]: eap: Module instantiation failed.
> > > radiusd.conf[1940] Unknown module "eap".
> > > radiusd.conf[1887] Failed to parse authenticate section.
> > > cheval:/# find -name rlm_eap_tls.so
> > > cheval:/#
> > >
> > >
> > > Can anyone give me a hint before my PC goes through a closed window?
> > > Thanking you in anticipation,
> > > build
> > > -
> > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users..html
> >
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html



More information about the Freeradius-Users mailing list