rlm_realm doesn't strip the username

Tomasz Zieleniewski tzieleniewski at gmail.com
Fri Oct 12 20:50:21 CEST 2007


I wasn't able to find anything meaningful so
I attached the whole output in the log file.

Bests
Tomasz

On 10/12/07, tnt at kalik.co.yu <tnt at kalik.co.yu> wrote:
>
> radiusd -X of the server startup.
>
> Ivan Kalik
> Kalik Informatika ISP
>
>
> Dana 12/10/2007, "Tomasz Zieleniewski" <tzieleniewski at gmail.com> piše:
>
> >I do not use clients.conf file, I use database.
> >
> >When I switch to my previous build 2.0.0-pre0 it works.
> >When I run 2.0.0-pre2 it doesn't.
> >I use the same configuration.
> >
> >Cheers
> >tomasz
> >
> >On 10/12/07, tnt at kalik.co.yu <tnt at kalik.co.yu> wrote:
> >>
> >> Add this to clients.conf:
> >>
> >> client 127.0.0.1 {
> >>         secret          = testing123
> >>         shortname       = localhost
> >> }
> >>
> >> Ivan Kalik
> >> Kalik Informatika ISP
> >>
> >>
> >>
> >> Dana 12/10/2007, "Tomasz Zieleniewski" <tzieleniewski at gmail.com>
> pi�e:
> >>
> >> >Thank you Alan
> >> >
> >> >I updated to 2.0.0-pre2. But now I have some errors and I can' tcheck
> >> >again:)
> >> >Now when my NAS sends the Accounting request or I try to run 'radtest'
> >> tool,
> >> >the verification fails.
> >> >I didn't change anything in the configuration and in the database. I
> have
> >> >the same NAS configuration.
> >> >I get the following error in the debug mode:
> >> >
> >> >Ignoring request to authentication address * 1812 from unknown client
> >> >127.0.0.1 port 37391
> >> >
> >> >Please point me what do I missed:)
> >> >
> >> >Best regards
> >> >tomasz
> >> >
> >> >Tomasz Zieleniewski wrote:
> >> >> > I am using radius version 2.0.0-pre0.
> >> >> > I have the following problem that when I receive the
> >> Accounting-Request
> >> >> > with the username whose domain part is not checked with any of my
> >> realm
> >> >> > defined in the proxy.conf file. The username is not stripped.
> >> >> > I use the suffix rule for domain: 'username at domain" in my realm
> >> module
> >> >> > and I inoke it in preacct in radiusd.conf.
> >> >> > I have the DEFAULT realm defined and it doesn't have the nostrip
> >> option
> >> >> > activated.
> >> >> > So I think when there is no domain match the username should also
> be
> >> >> > stripped??
> >> >>
> >> >>   Likely, yes.  What does debug mode say?
> >> >>
> >> >>   You could also try running CVS head, which has a number of fixes
> over
> >> >> 2.0-pre0.
> >> >>
> >> >>   Alan DeKok.
> >> >>
> >> >>
> >> >> ------------------------------
> >> >>
> >> >> Message: 10
> >> >> Date: Fri, 12 Oct 2007 10:16:43 -0300
> >> >> From: "Sergio Belkin" <sebelk at gmail.com>
> >> >> Subject: Re: TLS fatal access_denied
> >> >> To: "FreeRadius users mailing list"
> >> >>         <freeradius-users at lists.freeradius.org>
> >> >> Message-ID:
> >> >>         <8c6f7f450710120616t48014e18g8c02184fdaef6b97 at mail.gmail.com
> >
> >> >> Content-Type: text/plain; charset=ISO-8859-1
> >> >>
> >> >> 2007/10/11, tnt at kalik.co.yu <tnt at kalik.co.yu>:
> >> >> > How sure are you that you are using EAP-TTLS?
> >> >> >
> >> >> > >  rlm_eap: EAP NAK
> >> >> > > rlm_eap: EAP-NAK asked for EAP-Type/peap   <==
> >> >> >
> >> >> > Ivan Kalik
> >> >> > Kalik Informatika ISP
> >> >> >
> >> >> > -
> >> >> > List info/subscribe/unsubscribe? See
> >> >> http://www.freeradius.org/list/users.html
> >> >> >
> >> >>
> >> >> I am pretty sure because I has  default_eap_type = ttls. I've just
> >> >> fixed, it was a problem of certificates...
> >> >>
> >> >> thanks-
> >> >>
> >> >> --
> >> >> --
> >> >> Sergio Belkin -
> >> >>
> >> >>
> >> >> ------------------------------
> >> >>
> >> >> -
> >> >> List info/subscribe/unsubscribe? See
> >> >> http://www.freeradius.org/list/users.html
> >> >>
> >> >>
> >> >> End of Freeradius-Users Digest, Vol 30, Issue 49
> >> >> ************************************************
> >> >>
> >> >
> >> >
> >>
> >> -
> >> List info/subscribe/unsubscribe? See
> >> http://www.freeradius.org/list/users.html
> >>
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20071012/a7f1377b/attachment.html>


More information about the Freeradius-Users mailing list