problem with eap/ttls winXP

elhammoud rachida racha81 at hotmail.fr
Wed Sep 26 12:26:32 CEST 2007


hello
I try to put authentication eap/ttls with win XP, I install secureW2 TTLS, 
and i put this in my files:
radiusd.conf
autorize {
        eap
        files
}
authenticate {
        Auth-Type PAP {
                       pap
         }
        eap
}

eap.conf
eap {
        default_eap_type = ttls
         timer_expire     = 60
gtc {
         auth_type = PAP
                }

tls {
                        private_key_password = whatever
                        private_key_file = ${raddbdir}/certs/serveur.pem

                        certificate_file = ${raddbdir}/certs/serveur.pem
                        CA_file = ${raddbdir}/certs/root.pem
                        dh_file = ${raddbdir}/certs/dh
                        random_file = ${raddbdir}/certs/random

                        fragment_size = 1024

                        include_length = yes
}

ttls {
                        default_eap_type = gtc

                        copy_request_to_tunnel = yes

                        use_tunneled_reply = yes

                }

users
"Joel"          Auth-Type := EAP , Calling-Station-Id =="00123f0e996f"
                  Service-Type = Framed-User,
                  Tunnel-type = VLAN,
                  Tunnel-Private-Group-ID =4,
                  Tunnel-Medium-Type =IEEE-802

After start freeradius with radiusd -X -A i have this :

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /etc//raddb/proxy.conf
Config:   including file: /etc//raddb/clients.conf
Config:   including file: /etc//raddb/snmp.conf
Config:   including file: /etc//raddb/eap.conf
Config:   including file: /etc//raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1812
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "ttls"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/etc//raddb/certs/serveur.pem"
tls: certificate_file = "/etc//raddb/certs/serveur.pem"
tls: CA_file = "/etc//raddb/certs/root.pem"
tls: private_key_password = "whatever"
tls: dh_file = "/etc//raddb/certs/dh"
tls: random_file = "/etc//raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
rlm_eap: Loaded and initialized type tls
ttls: default_eap_type = "mschapv2"
ttls: copy_request_to_tunnel = yes
ttls: use_tunneled_reply = yes
rlm_eap: Loaded and initialized type ttls
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc//raddb/huntgroups"
preprocess: hints = "/etc//raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded files
files: usersfile = "/etc//raddb/users"
files: acctusersfile = "/etc//raddb/acct_users"
files: preproxy_usersfile = "/etc//raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, 
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded detail
detail: detailfile = 
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
rad_recv: Access-Request packet from host 145.238.3.182:1026, id=239, 
length=206
        Framed-MTU = 1480
        NAS-IP-Address = 145.238.3.182
        NAS-Identifier = "sw-test-radius-1"
        User-Name = "Joel"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        NAS-Port = 15
        NAS-Port-Type = Ethernet
        NAS-Port-Id = "15"
        Called-Station-Id = "00-14-38-fe-12-00"
        Calling-Station-Id = "00-12-3f-0e-99-6f"
        Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "301"
        EAP-Message = 0x02010009014a6f656c
        Message-Authenticator = 0xe987ca4236baf7af5832f2d7ac47fa3a
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  rlm_eap: EAP packet type response id 1 length 9
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
  modcall[authorize]: module "files" returns notfound for request 0
modcall: group authorize returns updated for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 239 to 145.238.3.182:1026
        EAP-Message = 0x010200061520
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x5f4f4c366e47d80bec5ce29845ad9308
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 145.238.3.182:1026, id=240, 
length=275
        Framed-MTU = 1480
        NAS-IP-Address = 145.238.3.182
        NAS-Identifier = "sw-test-radius-1"
        User-Name = "Joel"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        NAS-Port = 15
        NAS-Port-Type = Ethernet
        NAS-Port-Id = "15"
        Called-Station-Id = "00-14-38-fe-12-00"
        Calling-Station-Id = "00-12-3f-0e-99-6f"
        Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "301"
        State = 0x5f4f4c366e47d80bec5ce29845ad9308
        EAP-Message = 
0x0202003c158000000032160301002d0100002903017c822dabc05ae9c9eac2421c1cf36eaa52c66b2b24fdb8be8662cadc1a769b95000002000a0100
        Message-Authenticator = 0xac95333ed54c9a95b895a469e622951b
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
  rlm_eap: EAP packet type response id 2 length 60
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 1
  modcall[authorize]: module "files" returns notfound for request 1
modcall: group authorize returns updated for request 1
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/ttls
  rlm_eap: processing type ttls
  rlm_eap_ttls: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11
    (other): before/accept initialization
    TLS_accept: before/accept initialization
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 002d], ClientHello
    TLS_accept: SSLv3 read client hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
    TLS_accept: SSLv3 write server hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 05ad], Certificate
    TLS_accept: SSLv3 write certificate A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
    TLS_accept: SSLv3 write server done A
    TLS_accept: SSLv3 flush data
    TLS_accept:error in SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
  eaptls_process returned 13
  modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 240 to 145.238.3.182:1026
        EAP-Message = 
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
        EAP-Message = 
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
        EAP-Message = 
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
        EAP-Message = 
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
        EAP-Message = 0x61636861383140686f746d61696c2e667230819f300d
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x27e30d08b4b036fbc4c4cb4e73b755f2
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 145.238.3.182:1026, id=241, 
length=221
        Framed-MTU = 1480
        NAS-IP-Address = 145.238.3.182
        NAS-Identifier = "sw-test-radius-1"
        User-Name = "Joel"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        NAS-Port = 15
        NAS-Port-Type = Ethernet
        NAS-Port-Id = "15"
        Called-Station-Id = "00-14-38-fe-12-00"
        Calling-Station-Id = "00-12-3f-0e-99-6f"
        Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "301"
        State = 0x27e30d08b4b036fbc4c4cb4e73b755f2
        EAP-Message = 0x020300061500
        Message-Authenticator = 0x317ff3409960cc916aed1d95b1dc0c10
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
  modcall[authorize]: module "preprocess" returns ok for request 2
  rlm_eap: EAP packet type response id 3 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 2
  modcall[authorize]: module "files" returns notfound for request 2
modcall: group authorize returns updated for request 2
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/ttls
  rlm_eap: processing type ttls
  rlm_eap_ttls: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake fragment handler
  eaptls_verify returned 1
  eaptls_process returned 13
  modcall[authenticate]: module "eap" returns handled for request 2
modcall: group authenticate returns handled for request 2
Sending Access-Challenge of id 241 to 145.238.3.182:1026
        EAP-Message = 
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
        EAP-Message = 
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
        EAP-Message = 0xb73b3e8a7155a4173dc20ead5eee0240fc16030100040e000000
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0cbaf20c360d994292155c1353603bf9
Finished request 2
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 239 with timestamp 46fa2c36
Cleaning up request 1 ID 240 with timestamp 46fa2c36
Cleaning up request 2 ID 241 with timestamp 46fa2c36
Nothing to do.  Sleeping until we see a request.

why a server dont sent response to client? no access-accept no access-rejet?
and i dont have SSL negotiation finished successfully?
please can you help me!!!
thanks

_________________________________________________________________
Gagnez des écrans plats avec Live.com http://www.image-addict.fr/




More information about the Freeradius-Users mailing list