Failed obtain IP address after authenticated using EAP-MD5

[tnt at kalik.co.yu]

Sorry, I didn't notice that router and AP are the same device. What is
your Ethernet IP address? It seems to be 198.168.0.1, since your radius
server (which has a wired connection, I hope) has address 198.168.0.120
and got it via DHCP. So it seems that you have enabled DHCP on the
Ethernet and not wireless port.

Ivan Kalik
Kalik Informatika ISP


Dana 29/9/2007, "Chiu Luk" <cluk76 at yahoo.com> piše:

>But I already enabled DHCP in my wireless router (DLink DIR-655).
>
>After the supplicant authenticated successfully from the FreeRadius server, my notebook fails to obtain an IP address from the Access Point (router) and end up getting a 169.254.198.216 IP address.
>
>capture of EAP-MD5 protcol successfully get authenticated
>http://www.oniva.com/upload/1356/success.jpg
>
>the setup of 802.1x inside D-link wireless router is like the following
>http://www.oniva.com/upload/1356/dlink.jpg
>
>setup of router using DHCP is like the following
>http://www.oniva.com/upload/1356/dhcp.jpg
>
>Anyone have any ideas why my notebook cannot obtain an IP address from wireless router?
>
>Thank you.
>       if( self == top ) {  Nabble.writeReturnToLink(   'Return to thread'  ); } else if( Nabble.prev )  Nabble.writeReturnToLink(Nabble.prev);
>
>Alan DeKok <aland at deployingradius.com> wrote:   If you're using EAP, IP addresses are assigned through DHCP.  This has
>nothing to do with FreeRADIUS.
>
>  Go fix your access point to do DHCP properly.
>
>  Alan DeKok.
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
>
>---------------------------------
>Be a better Heartthrob. Get better relationship answers from someone who knows.
>Yahoo! Answers - Check it out.
>