Re: Problem for IPv6 Connection...

[Vikas Bagora <vikas.bagora@yahoo.com>]

THaNks A Lot Alan,

 

Now Server is working Fine for the IPv4 Client Request only, But i dont understand with the same Image(with the same set-up) why the IPv6(client) Connection is not receiving reply back from the Radius Server...though Server is authentication properly as similar its doing for the IPv4 connection from the client.

 

Server side:

I am not sure whether Radius Server is sending(access-accept is showing on screen) the packet to IPv6 Client or not..I need to confrim that !!!

 

Client Side:

After sending the Access-Request packet to server the client is getting time out and after 3 tries and then its exceeding its time limit and stop requesting for the IPv6 connection further.

I have stoped time out even aslo...but not worked !

Its not getting response packet from the Radius Server.

 

Thanks again....

Vikas

Alan DeKok <aland@deployingradius.com> wrote:

> Vikas Bagora wrote:
> > 1. I am using freeradius-server-2.0.0-pre1
>
> Please use 2.0.0-pre2.
>
> > - "*users*" file is modified in only with this lines :
> > vikas User-Password == password
>
> Change that line to:
>
> vikas Cleartext-Password := "password"
>
> Alan DeKok.
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

---

Luggage? GPS? Comic books? 
Check out fitting  gifts for grads at Yahoo! Search.