|
Hello all! I am trying to get a wireless client to
connect to the Freeradius server using WPA & WPA2 Enterprise . I have followed this guide: http://www.smallnetbuilder.com/content/view/30213/98/1/5/ But I am getting a few error messages from
the radius console: 1: ++[mschap] returns
noop
rlm_realm: No '@' in
User-Name = "puppypc", looking up realm
NULL
rlm_realm: No such realm
"NULL 2: rlm_eap: EAP packet type response id
2 length
12
rlm_eap: No EAP Start, assuming it's
an on-going EAP conversation 3: rlm_pap: WARNING! No "known good"
password found for the user. Authentication may fail because o ++[pap] returns noop I am gussing that any of the above are a
hint to what could be the problem, could anyone point me in the right direction
here? On where to look/what to change… how to fix… Attaching the entire outtake from the
radius console. Thanks for help, Best regards, Johan |
User-Name = "puppypc"
NAS-IP-Address = 192.168.1.144
Called-Station-Id = "00-20-a6-64-c3-b1:MVG-Personal"
Calling-Station-Id = "00-0f-cb-f9-3b-f9;MVG-Personal"
NAS-Identifier = "MVG-1"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0202000c0170757070797063
Message-Authenticator = 0xde9feab06f10da4dcbee4be91e051747
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "puppypc", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 2 length 12
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry puppypc at line 96
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because o
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Requiring client certificate
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
++[eap] returns handled
Reply-Message := "Hello Puppypc"
EAP-Message = 0x010300060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfb7f02b7fb7c0fe554a10b118c4da47c
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
User-Name = "puppypc"
NAS-IP-Address = 192.168.1.144
Called-Station-Id = "00-20-a6-64-c3-b1:MVG-Personal"