ascend data filters not being returned

[donaldbjames at suddenlinkmail.com]

That's what I would like to know.  I ran freeradius in the debug mode, but I
still can't figure out why freeradius is not sending the data back to the
ascend data filter.

Don James

----- Original Message ----- 
From: "Ivan Kalik" <tnt at kalik.net>
To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
Sent: Saturday, February 02, 2008 2:44 PM
Subject: Re: ascend data filters not being returned


You havent turned anything on (including the debug). What should match so
the user gets this information?

Ivan Kalik
Kalik Informatika ISP


Dana 2/2/2008, "Don James" <donaldbjames at suddenlinkmail.com> piše:

>Hi,
>
>When I run radtest, I get the following response:
>
>Sending Access-Request of id 64 to 192.168.1.41 port 1645
>        User-Name = "donjames at hendersonisp.com"
>        User-Password = "donjames"
>        NAS-IP-Address = 255.255.255.255
>        NAS-Port = 5
>rad_recv: Access-Accept packet from host 192.168.1.41:1645, id=64,
length=20
>
>As you can see, the data from the ascend data filters is not being
returned.
>I suspect that I have somehow turned on encryption.  How do I set "plain
>text" communication?
>
>Sincerely,
>
>Don James
>-
>List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>
>

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html