|
---------------------------------------------------> > What do you want to do? What do you want to achieve? What authentication are > you planning to use ? ---------------------------------------------------< Hi. Principally sorry for my bad english.I am setup freeradius .I want chain all network client.My problem is - ı am setup freeradius server - I am setup layer2 switch - Iam configure switch and client pc - and start -but client pc sending access request to switch, switch request to server ,server message is "access challenge" what is this I dont know and what I do? ------------------------------------------------------------------------------------------------------------ > rad_recv: Access-Request packet from host 10.1.254.38 port 49155, id=0, > length=73 > Threads: total/active/spare threads = 5/0/5 > Thread 2 got semaphore > Thread 2 handling request 0, (1 handled so far) > NAS-IP-Address = 10.1.254.38 > NAS-Port-Type = Ethernet > NAS-Port = 17 > User-Name = "test" > EAP-Message = 0x020100090174657374 > Message-Authenticator = 0x40b01c65697a037c2aec79069d28d709 > +- entering group authorize > ++[preprocess] returns ok > ++[chap] returns noop > ++[mschap] returns noop > Waking up in 0.9 ! seconds. > ++[unix] returns notfound > rlm_realm: No '@' in User-Name = "test", looking up realm NULL > rlm_realm: No such realm "NULL" > ++[suffix] returns noop > rlm_eap: EAP packet type response id 1 length 9 > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation > ++[eap] returns updated > users: Matched entry test at line 93 > expand: Hello, %{User-Name} -> Hello, test > ++[files] returns ok > ++[expiration] returns noop > ++[logintime] returns noop > rlm_pap: Found existing Auth-Type, not changing it. > ++[pap] returns noop > rad_check_password: Found Auth-Type EAP > auth: type "EAP" > +- entering group authenticate > rlm_eap: EAP Identity > rlm_eap: processing type tls > rl! m_eap_tls: Initiate > rlm_eap_tls: Start returned 1 > ; ++[eap] returns handled > Sending Access-Challenge of id 0 to 10.1.254.38 port 49155 > Reply-Message = "Hello, test" > EAP-Message = 0x010200061920 > Message-Authenticator = 0x00000000000000000000000000000000 > State = 0xf779e639f77bff0d3d2c202f1c7a8b9c > Finished request 0. > Going to the next request Helping your favorite cause is as easy as instant messaging. You IM, we give. Learn more. |