Help With Cisco Configuration

[Joseph.Corrado@nc4.us]

I am trying to get a freeradius implementation
rolled out for the first time and am running into a few issues that I cannot
seem to resolve.  I have a Cisco 2960 in a test lab with a Linux server
running freeradius 2.0.0 for authentication.  There are 2 problems
I am running into.

1.  I cannot seem to get the radius
server to authenticate a user and place them at the privilege exec prompt,
even thought I have configured the 'users' file to place all users at the
privilege exec prompt when logging in by default (I did this just to test,
ultimately I would like to create groups with different privilege levels).
 

2.  I cannot seem to get the Cisco
2960 to accept the radius servers authentication response when logging
in the device via a VTY session using SSH.  When running the server
in debug mode, you can see the request coming in and the server sending
the authentication response back to the switch, but the authentication
will still fail at the switch.  The only authentication I get is at
the console level.

Any help would be greatly appreciated.

Thank you.

Joe







Disclaimer: This message is intended only for the use of the individual
or entity to
which it is addressed and may contain information which is privileged,
confidential, proprietary,
or exempt from disclosure under applicable law. If you are not the intended
recipient or the person
responsible for delivering the message to the intended recipient, you are
strictly prohibited from
disclosing, distributing, copying, or in any way using this message. If
you have received this 
communication in error, please notify the sender and destroy and delete
any copies you may have
received.