Re: Help With Cisco Configuration

[Joseph.Corrado@nc4.us]

Thanks.  I will definitely upgrade
to 2.0.2.

As far as the Cisco config, its pretty
much the standard aaa authentication commands to enable radius authentication,
the most relevant one to this problem being the "aaa authorization
exec radius if-authenticated" command is definitely there.  Nothing
else special, as I said just the standard commands to enable radius authentication.

Joe

A.L.M.Buxey@lboro.ac.uk
Sent by: freeradius-users-bounces+joseph.corrado=nc4.us@lists.freeradius.org

02/27/2008 05:15 PM

Please respond to
FreeRadius users mailing list <freeradius-users@lists.freeradius.org>

To	FreeRadius users mailing list <freeradius-users@lists.freeradius.org>
cc
Subject	Re: Help With Cisco Configuration

Hi,

> I am trying to get a freeradius implementation rolled out for the
first 
> time and am running into a few issues that I cannot seem to resolve.
 I 
> have a Cisco 2960 in a test lab with a Linux server running freeradius
> 2.0.0 for authentication.  There are 2 problems I am running
into.

1) use 2.0.2

2) you didnt supply your cisco IOS config - but there again, this isnt
the cisco support mailing list - your problems seem to arise from a lack
of the required 802.1x commands in the IOS config - especially the ones
relating to authorization 

alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html











Disclaimer: This message is intended only for the use of the individual
or entity to
which it is addressed and may contain information which is privileged,
confidential, proprietary,
or exempt from disclosure under applicable law. If you are not the intended
recipient or the person
responsible for delivering the message to the intended recipient, you are
strictly prohibited from
disclosing, distributing, copying, or in any way using this message. If
you have received this 
communication in error, please notify the sender and destroy and delete
any copies you may have
received.