Re: probs with accounting Attribute Client-IP-Address was not

[orion <meshkruaj@gmail.com>]

after replacing the rlm_acct_unique.c my debug tells :

rad_recv: Accounting-Request packet from host 192.168.2.225 port 1025, id=94, length=137
        Service-Type = Framed-User
        Framed-Protocol = PPP
        NAS-Port = 48
        NAS-Port-Type = Ethernet
        User-Name = "user"
        Calling-Station-Id = "00:D0:59:D9:13:61"
        Called-Station-Id = "service1"
        NAS-Port-Id = "ether3"
        Acct-Session-Id = "81000000"
        Framed-IP-Address = 10.254.254.254
        Acct-Authentic = RADIUS
        Acct-Status-Type = Start
        NAS-Identifier = "MikroTik"
        NAS-IP-Address = 192.168.2.225
        Acct-Delay-Time = 0
+- entering group preacct
++[preprocess] returns ok
rlm_acct_unique: Hashing 'NAS-Port = 48,Client-IP-Address <INVALID-TOKEN> 
192.168.2.225,NAS-IP-Address = 192.168.2.225,Acct-Session-Id = "81000000",User-Name = "user"'


now it says "INVALID-TOKEN".

should i replace only that file or are other files ( maybe entire package )
 to be replaced ?!

thanx

On 12/01/2008, Alan DeKok < aland@deployingradius.com> wrote:

orion wrote:
> hi to all.
> im using FR 2.0.0 with default config.
> in debug mode i get
>
> *rlm_acct_unique*: *WARNING*: *Attribute* *Client *-*IP*-*Address* was
> not found in
> request, unique ID MAY be inconsistent

  Good point.  The way that attribute is handled was changed in 2.0.

  I've committed a fix that should enable your existing configuration to
work in 2.0.  You can grab CVS head, and replace the rlm_acct_unique.c
file in 2.0.0 with the version from CVS.  Re-build, re-install, and it
should now work.

  Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html