Re: rlm_eap: No EAP-Message, not doing EAP?

[Arran Cudbard-Bell <A.Cudbard-Bell@sussex.ac.uk>]

Phil Mayers wrote:
> secrookie@mac.com wrote:
> > My setup is as follows and I am trying to do WPA2 EAP-TLS 
> > authentication on an Apple Airport WLAN:
> >
> > Fedora 8
> > Freeradius (192.168.1.26)
> > Airport Express (192.168.1.23) - WPA2
>
> No it is not:

Could be WPA2 Personal ;)

> > I do not seem to be seeing eap messages in debug mode.   Would 
> > appreciate some assistance if possible.
> >
> > --REJECTED USER
> >
> > rad_recv: Access-Request packet from host 192.168.1.23:1812, id=88, 
> > length=73
> >     User-Password = "testing123"
> >     User-Name = "0019w3-h9a056"
> >     NAS-Identifier = "192.168.1.23"
> >     NAS-IP-Address = 192.168.1.23
>
> That is a PAP request; your access point isn't using WPA. Fix your AP


Yes you've enabled Mac (Media Access Control) authentication as opposed 
to WPA2-Enterprise which is EAP based.

You've configured the airport to send a Access-Request packet with a 
dummy password and the mac-address of the station wishing to associate. 
This is *not* EAP-Based.

I can't remember what the settings are off the top of my head, but if 
you haven't figured it out by Monday email me directly and I'll be able 
to help/ send you a demo config.

Arran

> -
> List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/users.html