Re: Can't get the value of 'Digest-User-name', 'Digest-Realm', 'Digest-Method', 'Digest-Uri', 'Digest-Nonce', 'Digest-Response'

["Ivan Kalik" <tnt@kalik.net>]

>May it be the problem from the radius client, or is it the problem in my
>perl code.
>I can't rectify the problem, I am confusing where should I emphasized
>
>Here is the new output when it is run in  radiusd -X after rejecting da
>user.
>
>rad_recv: Access-Request packet from host 192.168.1.227 port 32847, id=182,
>length=252
>        User-Name = "john@192.168.1.227"
>        X-Ascend-Netware-timeout = 1785686126
>        X-Ascend-Send-Secret = 0x3139322e3136382e312e323237
>        X-Ascend-Receive-Secret =
>0x34383161663338653534346236663063383862343865393864346639313036626264363230306536
>        X-Ascend-IP-Pool-Definition = "sip:192.168.1.227"
>        X-Ascend-IPX-Peer-Mode = 0x5245474953544552
>        Digest-Response = "1e926599fa0777bef89010421e3e1c41"
>        Service-Type = IAPP-Register
>        X-Ascend-PW-Lifetime = 1785686126
>        Cisco-AVPair = "call-id=
>25b5a186aad84c2fa769946f1b1c7110@192.168.1.193"
>        NAS-IP-Address = 127.0.0.1
>        NAS-Port = 5060

Your radius client is not sending Digest-Attributes. It's sending Ascend
VSAs. Read your NAS documentation how to set up digest authentication if
you want that.

Ivan Kalik
Kalik Informatika ISP