FreeRadius 2.1.1 with PEAP- EAP-MD5

Queenie de Melo queenie245 at gmail.com
Thu Nov 6 12:41:11 CET 2008


Thanks Ivan.

Please find attached the log. Hope you can get some info from this.

2008/11/6 <tnt at kalik.net>

> Error is earlier in the debug. Post the whole thing and I'll point it
> out. I think that this is a bug.
>
> Ivan Kalik
> Kalik Informatika ISP
>
>
> Dana 6/11/2008, "Queenie de Melo" <queenie245 at gmail.com> piše:
>
> >Hi All,
> >
> >I have been trying to configure PEAP with EAP -MD5 but i juat cannot get
> it
> >to work.
> >
> >TTLS with EAP -MD5 workes fine.
> >Also PEAP with Token card(gtc) and MSCHAPv2 works fine.
> >
> >What I tried is...
> >1. When I *comment out MSCHAPv2* in the eap.conf file and I try with the
> >client being in PEAP EAP-MSCHAPv2, then I get a REJECT as below.
> >2.When I *comment out MD5* in the eap.conf file and try with the client
> >being in PEAP EAP MD5, then I get the same REJECT message as below
> >3. When *I dont comment out MD5(MD5 is enabled)* in the eap.conf file and
> >try with the client being in PEAP EAP MD5, then I get the same REJECT
> >message as below
> >
> >In all the above three cases, I seem to be getting the same Reject message
> >as below:
> >
> >
> >*Is it possible that in the eap.conf file, the MD5 does not get enabled
> >under PEAP? Cause MD5 does work fine with TTLS for me. *
> >
> >Pl help!
> >
> >Regards,
> >Queenie
> >
> >
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20081106/da9dd8a9/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: rad_log.txt
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20081106/da9dd8a9/attachment.txt>


More information about the Freeradius-Users mailing list