problem with ip_pools -- revisited

Marco C. Coelho maillist1 at argontech.net
Thu Oct 30 20:03:58 CET 2008


No response so I'm resending this

Marco C. Coelho wrote:
> I've been trying to get my second set up IP address' working.  The 
> main_pool works correctly.  main_pool2 does not appear to ever issue 
> more than 2 ip addresses.
> you had previously mentioned:
>
> Marco C. Coelho wrote:
>   
>>> >>   Did you put "main_pool" and "main_pool" into a fail-over section, as
>>> >> documented in "man unlang" ?
>>> >>   
>>>     
>> > 
>> > No,  and I must be blind, because I have read the section and cannot
>> > find mention of it.
>>   
>
>   Sorry, the "redundant" section should do what you want.
>
>   Alan DeKok.
>
>
> I cannot find a redundant section in this radiusd.conf
>   
>
> my radiusd.conf contains:
>
>  ippool main_pool {
>
>     #  range-start,range-stop: The start and end ip
>     #  addresses for the ip pool
>     range-start = 64.202.227.1
>     range-stop = 64.202.229.254
>
>     #  netmask: The network mask used for the ip's
>     netmask = 255.255.255.0
>
>     #  cache-size: The gdbm cache size for the db
>     #  files. Should be equal to the number of ip's
>     #  available in the ip pool
>     cache-size = 762
>
>     # session-db: The main db file used to allocate ip's to clients
>     session-db = ${raddbdir}/db.ippool
>
>     # ip-index: Helper db index file used in multilink
>     ip-index = ${raddbdir}/db.ipindex
>
>     # override: Will this ippool override a Framed-IP-Address already set
>     override = no
>
>     # maximum-timeout: If not zero specifies the maximum time in 
> seconds an
>     # entry may be active. Default: 0
>     maximum-timeout = 0
>   }
>
>   ippool main_pool2 {
>
>     #  range-start,range-stop: The start and end ip
>     #  addresses for the ip pool
>     range-start = 64.202.237.1
>     range-stop = 64.202.239.254
>
>     #  netmask: The network mask used for the ip's
>     netmask = 255.255.255.0
>
>     #  cache-size: The gdbm cache size for the db
>     #  files. Should be equal to the number of ip's
>     #  available in the ip pool
>     cache-size = 762
>
>     # session-db: The main db file used to allocate ip's to clients
>     session-db = ${raddbdir}/db.ippool2
>
>     # ip-index: Helper db index file used in multilink
>     ip-index = ${raddbdir}/db.ipindex2
>
>     # override: Will this ippool override a Framed-IP-Address already set
>     override = no
>
>     # maximum-timeout: If not zero specifies the maximum time in 
> seconds an
>     # entry may be active. Default: 0
>     maximum-timeout = 0
>   }
>
> **********************************It also has:
>
> #  Accounting.  Log the accounting data.
> #
> accounting {
>   #
>   #  Create a 'detail'ed log of the packets.
>   #  Note that accounting requests which are proxied
>   #  are also logged in the detail file.
>   detail
>   main_pool
>   main_pool2
>
> **********************************It also has:
>
> #  Post-Authentication
> #  Once we KNOW that the user has been authenticated, there are
> #  additional steps we can take.
> post-auth {
>   #  Get an address from the IP Pool.
>   main_pool
>   main_pool2
>   #
>   #  If you want to have a log of authentication replies,
>   #  un-comment the following line, and the 'detail reply_log'
>   #  section, above.
>
>
>
>
> ------------------------------------------------------------------------
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20081030/f47e1b46/attachment.html>


More information about the Freeradius-Users mailing list