problem with ip_pools -- revisited

[tnt at kalik.net]

You did have a reply.

Ivan Kalik
Kalik Informatika ISP


Dana 30/10/2008, "Marco C. Coelho" <maillist1 at argontech.net> piše:

>No response so I'm resending this
>
>Marco C. Coelho wrote:
>> I've been trying to get my second set up IP address' working.  The
>> main_pool works correctly.  main_pool2 does not appear to ever issue
>> more than 2 ip addresses.
>> you had previously mentioned:
>>
>> Marco C. Coelho wrote:
>>
>>>> >>   Did you put "main_pool" and "main_pool" into a fail-over section, as
>>>> >> documented in "man unlang" ?
>>>> >>
>>>>
>>> >
>>> > No,  and I must be blind, because I have read the section and cannot
>>> > find mention of it.
>>>
>>
>>   Sorry, the "redundant" section should do what you want.
>>
>>   Alan DeKok.
>>
>>
>> I cannot find a redundant section in this radiusd.conf
>>
>>
>> my radiusd.conf contains:
>>
>>  ippool main_pool {
>>
>>     #  range-start,range-stop: The start and end ip
>>     #  addresses for the ip pool
>>     range-start = 64.202.227.1
>>     range-stop = 64.202.229.254
>>
>>     #  netmask: The network mask used for the ip's
>>     netmask = 255.255.255.0
>>
>>     #  cache-size: The gdbm cache size for the db
>>     #  files. Should be equal to the number of ip's
>>     #  available in the ip pool
>>     cache-size = 762
>>
>>     # session-db: The main db file used to allocate ip's to clients
>>     session-db = ${raddbdir}/db.ippool
>>
>>     # ip-index: Helper db index file used in multilink
>>     ip-index = ${raddbdir}/db.ipindex
>>
>>     # override: Will this ippool override a Framed-IP-Address already set
>>     override = no
>>
>>     # maximum-timeout: If not zero specifies the maximum time in
>> seconds an
>>     # entry may be active. Default: 0
>>     maximum-timeout = 0
>>   }
>>
>>   ippool main_pool2 {
>>
>>     #  range-start,range-stop: The start and end ip
>>     #  addresses for the ip pool
>>     range-start = 64.202.237.1
>>     range-stop = 64.202.239.254
>>
>>     #  netmask: The network mask used for the ip's
>>     netmask = 255.255.255.0
>>
>>     #  cache-size: The gdbm cache size for the db
>>     #  files. Should be equal to the number of ip's
>>     #  available in the ip pool
>>     cache-size = 762
>>
>>     # session-db: The main db file used to allocate ip's to clients
>>     session-db = ${raddbdir}/db.ippool2
>>
>>     # ip-index: Helper db index file used in multilink
>>     ip-index = ${raddbdir}/db.ipindex2
>>
>>     # override: Will this ippool override a Framed-IP-Address already set
>>     override = no
>>
>>     # maximum-timeout: If not zero specifies the maximum time in
>> seconds an
>>     # entry may be active. Default: 0
>>     maximum-timeout = 0
>>   }
>>
>> **********************************It also has:
>>
>> #  Accounting.  Log the accounting data.
>> #
>> accounting {
>>   #
>>   #  Create a 'detail'ed log of the packets.
>>   #  Note that accounting requests which are proxied
>>   #  are also logged in the detail file.
>>   detail
>>   main_pool
>>   main_pool2
>>
>> **********************************It also has:
>>
>> #  Post-Authentication
>> #  Once we KNOW that the user has been authenticated, there are
>> #  additional steps we can take.
>> post-auth {
>>   #  Get an address from the IP Pool.
>>   main_pool
>>   main_pool2
>>   #
>>   #  If you want to have a log of authentication replies,
>>   #  un-comment the following line, and the 'detail reply_log'
>>   #  section, above.
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>