SLM248G switch

[Stephen Bowman]

On Fri, Sep 26, 2008 at 3:05 PM, David Blackman <db at ece.ufl.edu> wrote:

> I have purchased a Linksys SLM248G switch that has 802.1x support.  I am
> new to radius server and would like to use this switch to authenticate ports
> for a lab to a freeradius server.  I have installed freeradius 2.1.0 on
> freebsd 7.0 system.
>
> It is the default configuration for FreeRadius 2.1.0 with the following
> added to the  client.conf.
> client 128.227.232.133 {
>        secret = thisislinksys
>        shortname = 232.133
>    }
> The Linksys switch is setup as follows:
> IP address: 128.227.220.28
> Priority: 0
> Authenticatio port: 1812
> number of retries: 3
> timeout for reply: 3
> dead time: 0
> key string: thisislinksys
> source IP address: 128.227.232.133
> usage type: 802.1x
>
> The WindowsXP setup:
> enable 802.1x auth: checked
> EAP type: MD5-challenge
>
> I do not see any output from the Freeradius server running radiusd -X.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>

>From the FR server, can you ping 128.227.232.133?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20080926/d01fbd07/attachment.html>