same user on different service

["Николай Г. Петров"]

Ok, thank you about answer!!
Please, I have a yet a question: every time when I try to login from 
same username with same password, successfully login user which is first 
meet in a users file.

How can I delineate this users over Service-Type which include a aaa 
packet???
    - from cisco console (NAS-Prompt-User)
    -from dialup (Framed-User)


file "hint"  

DEFAULT Suffix == ".ppp", Strip-User-Name = Yes
                    Hint = "HNT",
                    Service-Type = Framed-User,
                    Framed-Protocol = PPP

file "users"

usr100            User-Password := "pass"
                Service-Type = NAS-Prompt-User,
                cisco-avpair = "shell:priv-lvl=0"

usr100            Auth-Type := Local, User-Password := "pass"
                Called-Station-Id == "1133",
                Service-Type = Framed-User,
                Framed-Protocol = PPP,
                Cisco-AVPair ="ip:addr-pool=dynpool"
            

DEFAULT         Framed-Protocol == PPP
                Framed-Protocol = PPP,
                Framed-Compression = Van-Jacobson-TCP-IP


DEFAULT         Auth-Type := Reject
                Reply-Message = "%{User-Name},  don't have access!"

$ echo 
"User-Name=usr100,User-Password=pass,Service-Type=NAS-Prompt-User" | 
radclient 127.0.0.1:1812 auth testing123
Received response ID 244, code 2, length = 50
        Service-Type = NAS-Prompt-User
        Cisco-AVPair = "shell:priv-lvl=0"

$ echo "User-Name=usr100,User-Password=pass,Service-Type=Framed-User" | 
radclient 127.0.0.1:1812 auth testing123
Received response ID 244, code 2, length = 50
        Service-Type = NAS-Prompt-User
        Cisco-AVPair = "shell:priv-lvl=0"