Freeradius not authenticating Wireless Clients

Ivan Kalik tnt at kalik.net
Wed Sep 30 17:48:55 CEST 2009


>     I am having problems with my freeradius server for the past 24
> hours, which seems that the radius server isn't authenticating EAP-TLS
> clients from my wireless network. I am looking for a little advice from
> the local subject matter experts. I am running a Vista and an XP home
> client right now, both worked, I rebuilt the Vista machine and wasn't
> able to authenticate. my WAP tends to not service Radius requests when
> the radius server goes away for whatever reasons, and the fix is just to
> cycle power on it. It is a WRT54GS by Linksys, and after the last power
> cycle, it just doesn't authenticate clients anymore. If it is the WAP, I
> am wondering what suggestions people have for a good WAP that is stable
> and runs WPA2 Enterprise? What I am seeing from Radiusd on Debug mode is:
>
> rad_recv: Access-Request packet from host 192.168.10.10 port 1784, id=1,
> length=152

Then:

> rad_recv: Access-Request packet from host 192.168.10.10 port 1786, id=1,
> length=152
...
> Cleaning up request 63 ID 1 with timestamp +594
> Cleaning up request 64 ID 1 with timestamp +594
> Cleaning up request 65 ID 1 with timestamp +594
> Cleaning up request 66 ID 1 with timestamp +594
> Cleaning up request 67 ID 1 with timestamp +594
> Cleaning up request 68 ID 1 with timestamp +594

It seems to be sending the initial request over and over again. Is your AP
getting the response from the radius server?

Ivan Kalik
Kalik Informatika ISP




More information about the Freeradius-Users mailing list