i install freeradius successfully, but i can't telnet the port

[Spacelee]

on the radius server, i type the two command , and get those results, the
iptables has been shutdown


radtest test test localhost 1812 19861230
Sending Access-Request of id 124 to 127.0.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 127.0.0.1
NAS-Port = 1812
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=124,
length=20


radtest test test 173.224.212.50 1812 19861230
Sending Access-Request of id 236 to 173.234.232.50 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 127.0.0.1
NAS-Port = 1812
Sending Access-Request of id 236 to 173.224.212.50 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 127.0.0.1
NAS-Port = 1812
Sending Access-Request of id 236 to 173.224.212.50 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 127.0.0.1
NAS-Port = 1812
radclient: no response from server for ID 236 socket 3


2010/6/8 Spacelee <fjctlzy at gmail.com>

> this is the file users' content
> test Auth-Type:=MS-CHAP, User-Password:="test", Simultaneous-Use:=100
>         Service-Type = Framed-User,
>         Framed-Protocol = PPP,
>         Framed-IP-Address = 255.255.255.254,
>         Framed-IP-Netmask = 255.255.255.0
>
>
>
> 2010/6/8 Spacelee <fjctlzy at gmail.com>
>
> i use netstat and found there is radius listen on 1812, 1813 and 1814 using
>> udp
>> i shut down all the iptables both on the server of pptp and the server
>> radius
>>
>> but the pptp can't be authenticated , the log is
>>
>> RADIUS plugin initialized.
>> Jun  8 15:26:29 mountainview pppd[4604]: Plugin
>> /usr/lib64/pppd/2.4.4/radattr.so loaded.
>> Jun  8 15:26:29 mountainview pppd[4604]: RADATTR plugin initialized.
>> Jun  8 15:26:29 mountainview pppd[4604]: Plugin
>> /usr/lib64/pptpd/pptpd-logwtmp.so loaded.
>> Jun  8 15:26:29 mountainview pppd[4604]: pptpd-logwtmp: $Version$
>> Jun  8 15:26:29 mountainview pppd[4604]: pppd 2.4.4 started by root, uid 0
>> Jun  8 15:26:29 mountainview pppd[4604]: Using interface ppp0
>> Jun  8 15:26:29 mountainview pppd[4604]: Connect: ppp0 <--> /dev/pts/1
>> Jun  8 15:27:03 mountainview pppd[4604]: rc_send_server: no reply from
>> RADIUS server puppet:1812
>> Jun  8 15:27:03 mountainview pppd[4604]: Peer test failed CHAP
>> authentication
>> Jun  8 15:27:03 mountainview pppd[4604]: Connection terminated.
>> Jun  8 15:27:03 mountainview pppd[4604]: Exit.
>>
>>
>> it says there is not reply
>>
>> 2010/6/8 Alan Buxey <A.L.M.Buxey at lboro.ac.uk>
>>
>> Hi,
>>> > i can start freeradius ok, but my pptp can't remote access radius
>>> server, I telnet 1812 or 1813 , but both are connection refused, i don't
>>> know what to do with this situation
>>>
>>> firewall eg iptables , on the server you put freeradius on?
>>>
>>> alan
>>> -
>>> List info/subscribe/unsubscribe? See
>>> http://www.freeradius.org/list/users.html
>>>
>>
>>
>>
>> --
>> Spacelee
>>
>
>
>
> --
> Spacelee
>



-- 
Spacelee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100608/0dd5eed4/attachment.html>