nas-port 0

Daniel Soto daxocam at uax.es
Thu Sep 9 08:47:11 CEST 2010







hi, 



i hope someone can help me to understand this case. 



from a nas cisco 1841 i send by pppoe a request to a freeradius Version 1.1.3. 



the response ever is NAS-Port=0 







-- 



rad_recv: Accounting-Request packet from host xxxxxxxxxx:1646, id=114, length=168 
        Acct-Session-Id = "0C0C0C1400000071" 
        Framed-Protocol = PPP 
        Framed-Route = "xxxxxxxx 255.255.255.0" 
        Framed-IP-Address = xxxxxxxxx 
        User-Name = "xxxxxx" 
        Acct-Session-Time = 177 
        Acct-Input-Octets = 10056 
        Acct-Output-Octets = 9579 
        Acct-Input-Packets = 147 
        Acct-Output-Packets = 125 
        Acct-Authentic = RADIUS 
        Acct-Status-Type = Interim-Update 
        NAS-Port-Type = Virtual 
        NAS-Port = 0 
        NAS-Port-Id = "0/0/1/130" 
        Service-Type = Framed-User 
        NAS-IP-Address = xxxxxxx 

        Acct-Delay-Time = 0 





when i try it from a cisco pix to same freeradius, the answer is different 

      





 rad_recv: Access-Request packet from host xxxxxxx:1025, id=157, length=123 
        User-Name = "xxxxxx" 
        User-Password = "xxxxxxxx" 
        NAS-IP-Address = 10.x.x.254 
         NAS-Port = 157 
        NAS-Port-Type = Virtual 
        Cisco-AVPair = "ip:source-ip=10.x.x.x" 
        Calling-Station-Id = "ip:source-ip=10.x.x.x" 



both cisco, 1841 and pix authenticate in the same freeradius 



why? 



how i can configurate the cisco 1841 to receive the information of the nas-port and Calling-Station-Id ? 





thanks. 






-- 



rad_recv: Accounting-Request packet from host xxxxxxxxxx:1646, id=114, length=168 
        Acct-Session-Id = "0C0C0C1400000071" 
        Framed-Protocol = PPP 
        Framed-Route = "xxxxxxxx 255.255.255.0" 
        Framed-IP-Address = xxxxxxxxx 
        User-Name = "xxxxxx" 
        Acct-Session-Time = 177 
        Acct-Input-Octets = 10056 
        Acct-Output-Octets = 9579 
        Acct-Input-Packets = 147 
        Acct-Output-Packets = 125 
        Acct-Authentic = RADIUS 
        Acct-Status-Type = Interim-Update 
        NAS-Port-Type = Virtual 
        NAS-Port = 0 
        NAS-Port-Id = "0/0/1/130" 
        Service-Type = Framed-User 
        NAS-IP-Address = xxxxxxx 

        Acct-Delay-Time = 0 





when i try it from a cisco pix to same freeradius, the answer is different 

      





 rad_recv: Access-Request packet from host xxxxxxx:1025, id=157, length=123 
        User-Name = "xxxxxx" 
        User-Password = "xxxxxxxx" 
        NAS-IP-Address = 10.x.x.254 
         NAS-Port = 157 
        NAS-Port-Type = Virtual 
        Cisco-AVPair = "ip:source-ip=10.x.x.x" 
        Calling-Station-Id = "ip:source-ip=10.x.x.x" 



both cisco, 1841 and pix authenticate in the same freeradius 



why? 



how i can configurate the cisco 1841 to receive the information of the nas-port and Calling-Station-Id ? 





thanks. 




- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100909/b6d2ff81/attachment.html>


More information about the Freeradius-Users mailing list