PEAP/MSCHAPv2 problem

[Jürgen Stader]

Hello,

i have a problem with my freeradius 2.1.10.

I try to use PEAP and MSCHAPv2 to authenticate my wireless client 
against radius and ldap. The client is a Windows XP Proffesional and 
configuered to use "protected EAP(PEAP)" for the wireless network.

On the radius servers console the following debug output is shown. It 
seems that the radius wants to use tls instead of peap, but the client 
don't have a client-certificate because EAP-MSCHAP v2 should be used.

The amazing thing is, this radius server is a vm-clone from an other 
radius, but the other radius works fine.

Debug Output:

rad_recv: Access-Request packet from host ... port 32769, id=219, length=159
         User-Name = "xy"
         Calling-Station-Id = "..."
         Called-Station-Id = "..."
         NAS-Port = 1
         NAS-IP-Address = ...
         NAS-Identifier = "T:WLC2125"
         Airespace-Wlan-Id = 3
         Service-Type = Framed-User
         Framed-MTU = 1300
         NAS-Port-Type = Wireless-802.11
         EAP-Message = 0x0202000b01737461646572
         Message-Authenticator = 0xe5b0ffbed84243bf27ac1ac9c9fcd0b5
server eduroam {
# Executing section authorize from file 
/etc/freeradius/sites-enabled/eduroam
+- entering group authorize {...}
[suffix] No '@' in User-Name = "xy", looking up realm NULL
[suffix] Found realm "NULL"
[suffix] Adding Realm = "NULL"
[suffix] Authentication realm is LOCAL.
++[suffix] returns ok
++[mschap] returns noop
[eap] EAP packet type response id 2 length 11
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/eduroam
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
} # server eduroam
Sending Access-Challenge of id 219 to ... port 32769
         EAP-Message = 0x010300061920
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x3abc7e1c3abf6764392496688aff7b3f
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host ... port 32769, id=219, length=159
Sending duplicate reply to client WLC-TUT port 32769 - ID: 219
Sending Access-Challenge of id 219 to ... port 32769
Waking up in 2.0 seconds.
Cleaning up request 0 ID 219 with timestamp +3
WARNING: 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x3abc7e1c3abf6764 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.

eap.conf:

     eap {
         default_eap_type = peap
         timer_expire     = 60
         ignore_unknown_eap_types = no
         cisco_accounting_username_bug = no

         md5 {
         }


         tls {
             certdir    = /etc/hostcertkey
             cadir = /etc/cacert
             dh_file = ${certdir}/dh
             private_key_file = ${certdir}/roaming.key
             certificate_file = ${certdir}/roaming.pem
             CA_file = ${cadir}/chain.txt
             dh_file = ${certdir}/dh
             random_file = /dev/urandom
             fragment_size = 1024
             include_length = yes
             check_crl = no
             cipher_list = "DEFAULT"
         }

         ttls {
             default_eap_type = mschapv2
             copy_request_to_tunnel = yes
             #use_tunneled_reply = yes
             virtual_server = "eduroam-inner-tunnel"
         }

         peap {
             default_eap_type = mschapv2
             copy_request_to_tunnel = yes
             #use_tunneled_reply = yes
             #proxy_tunneled_request_as_eap = yes
             virtual_server = "eduroam-inner-tunnel"
         }

         mschapv2 {
         }
     }

-- 
Mit freundlichen Grüßen,

Jürgen Stader

Rechenzentrum

Hochschule Furtwangen
www.hs-furtwangen.de