preprocess module

[Tim Sylvester]

Why did you remove the files? Unless they are doing something "bad", leave
them alone.

Tim

> -----Original Message-----
> From: freeradius-users-
> bounces+tim.sylvester=networkradius.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+tim.sylvester=networkradius.com at lists.freeradius.org] On Behalf
> Of McCann, Brian
> Sent: Monday, January 10, 2011 1:49 PM
> To: FreeRadius users mailing list
> Subject: RE: preprocess module
>
> It's worth mentioning that if I change "ascend_channels_per_line" to
> "32" instead of "23", that change gets recognized.
>
> --Brian
>
> -----Original Message-----
> From: freeradius-users-bounces+bmccann=andmore.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+bmccann=andmore.com at lists.freeradius.org] On Behalf Of McCann,
> Brian
> Sent: Monday, January 10, 2011 4:45 PM
> To: freeradius-users at lists.freeradius.org
> Subject: preprocess module
>
> Hi all.  Trying to understand and learn freeradius.  For my use, I do
> not need the "huntgroups" or "hints" files, so I tried taking them out.
> I renamed the files from "huntgroups" to "huntgroups.off", and the same
> for hints.  I then edited "module/preprocess" to take out references to
> these two files.  However, when I start up radiusd, it appears that
> it's STILL looking for the files.  I've gone so far as doing a "grep -
> ir huntgroup *", and every line it comes back with is commented out.
> Here's the debug and my modules/preprocess file:
>
> --debug start--
>
> server { # from file /usr/local/etc/raddb/radiusd.conf
>  modules {
>  Module: Checking authenticate {...} for more modules to load
>  Module: Checking authorize {...} for more modules to load
>  Module: Linked to module rlm_preprocess
>  Module: Instantiating module "preprocess" from file
> /usr/local/etc/raddb/modules/preprocess
>   preprocess {
>         huntgroups = "/usr/local/etc/raddb/huntgroups"
>         hints = "/usr/local/etc/raddb/hints"
>         with_ascend_hack = no
>         ascend_channels_per_line = 23
>         with_ntdomain_hack = no
>         with_specialix_jetstream_hack = no
>         with_cisco_vsa_hack = no
>         with_alvarion_vsa_hack = no
>   }
> rlm_preprocess: Error reading /usr/local/etc/raddb/huntgroups
> /usr/local/etc/raddb/modules/preprocess[13]: Instantiation failed for
> module "preprocess"
> /usr/local/etc/raddb/sites-enabled/default[9]: Failed to load module
> "preprocess".
> /usr/local/etc/raddb/sites-enabled/default[1]: Errors parsing authorize
> section.
>
> --debug end--
>
> --preprocess start--
>
> preprocess {
>    with_ascend_hack = no
>    ascend_channels_per_line = 23
>    with_ntdomain_hack = no
>    with_specialix_jetstream_hack = no
>    with_cisco_vsa_hack = no
> }
>
> --preprocess end--
>
> Anyone have any ideas on where it's getting this configuration from???
>
> Thanks!
> --Brian
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html